1. Introduction
Thank you for choosing the 4DRC M6 Remote Control RC Helicopter. This manual provides essential information for the safe operation, setup, and maintenance of your new helicopter. Please read it thoroughly before use to ensure optimal performance and to prevent damage.
The 4DRC M6 is an advanced RC helicopter designed for both beginners and experienced pilots. It features stable flight, durable construction, and intelligent control options, including a 4K camera for aerial photography on select models.
2. Safety Information
- Warning: Not suitable for children under 36 months due to small parts.
- Always operate the helicopter in open areas, away from people, animals, and obstacles.
- Do not fly near high-voltage lines, trees, or water.
- Ensure the helicopter's battery is fully charged and the remote control batteries are fresh before each flight.
- Avoid flying in strong winds (anti-wind ability is <10km/h).
- Supervise children during operation.
- Do not touch the rotating blades during operation.
3. Package Contents
The standard package includes:
- 4DRC M6 RC Helicopter
- Remote Controller
- Rechargeable Lithium Battery (for helicopter)
- USB Charging Cable
- Operating Instructions Manual (this document)
- Original Box
Note: 2 x 1.5 AA batteries for the remote controller are NOT included and must be purchased separately.
4. Product Overview
Helicopter Components
Remote Controller Layout
5. Setup
5.1 Charging the Helicopter Battery
- Locate the helicopter's rechargeable Lithium Battery.
- Connect the USB charging cable to the helicopter's charging port and to a USB power source (e.g., computer, USB wall adapter).
- The charging indicator light will show the charging status. Charging typically takes about 90 minutes.
- Once fully charged, disconnect the cable. Do not overcharge.
5.2 Installing Remote Control Batteries
- Open the battery compartment on the back of the remote controller.
- Insert 2 x 1.5 AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
5.3 Pairing the Helicopter and Remote Control
- Place the helicopter on a flat, level surface.
- Turn on the helicopter's power switch.
- Turn on the remote controller.
- Move the left joystick (throttle) up to its maximum position, then pull it down to its minimum position. The remote control will beep, indicating successful pairing.
5.4 Mobile App Installation (for Camera Models)
For models equipped with a camera and app control features:
- Scan the QR code in the product packaging or search for the dedicated 4DRC app on Google Play Store (for Android) or Apple App Store (for iOS).
- Install the app on your smartphone.
- Connect your smartphone to the helicopter's Wi-Fi network (usually named '4DRC-M6' or similar) in your phone's Wi-Fi settings.
- Open the app to access real-time video transmission and advanced control features.
6. Operating Instructions
6.1 Basic Flight Controls
- Take-off: After pairing, gently push the left joystick (throttle) upwards to make the helicopter ascend.
- Landing: Slowly pull the left joystick downwards to descend and land.
- Forward/Backward: Push the right joystick forward or backward.
- Turn Left/Right: Push the right joystick left or right.
- Altitude Hold: The helicopter features stable air pressure hover technology, allowing it to maintain a consistent altitude automatically.
6.2 Advanced Features
- Multi-gear Speed Switch: Use the designated button on the remote control to switch between low and high gear for different flight experiences. High gear offers faster movement, while low gear provides more precise control.
- Intelligent Obstacle Avoidance: The helicopter can sense potential hazards and automatically adjust its flight path to avoid impact.
- Trajectory Flight: Through the mobile app, you can draw a desired flight path on your screen, and the helicopter will automatically follow the trajectory.
- Gesture Control (Camera Models): For camera-equipped models, specific hand gestures can trigger photo or video recording. Refer to the app interface for detailed gesture commands.
- 360° Rotation: The helicopter can perform 360-degree rotations.
6.3 Camera Operation (for Camera Models)
The 4DRC M6 with camera features 4K HD aerial photography and real-time image transmission:
- Real-time View: Connect your smartphone to the helicopter's Wi-Fi and open the app to view live footage from the helicopter's camera.
- Photo/Video Recording: Use the dedicated buttons on the app interface or remote control, or gesture commands, to capture HD photos and videos.
7. Maintenance
- Clean the helicopter with a soft, dry cloth after each use.
- Inspect propellers for any damage before and after each flight. Replace damaged propellers immediately.
- Store the helicopter and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remove batteries from the remote control if not used for extended periods.
- The helicopter is made of high toughness, explosion-proof material, making it fall and crash resistant.
8. Troubleshooting
- Helicopter not responding: Ensure both helicopter and remote control are powered on and successfully paired. Check remote control batteries.
- Poor flight stability: Ensure the helicopter is placed on a flat surface before take-off. Avoid flying in windy conditions.
- Camera not working/no live feed: Verify your smartphone is connected to the helicopter's Wi-Fi network and the app is open. Ensure the helicopter model has a camera.
- Short flight time: Ensure the helicopter battery is fully charged. Flight time is typically 5-10 minutes.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 4D-M6 |
| Type | HELICOPTER |
| Material | Metal, Plastic |
| Dimensions | 26*19*12cm |
| Drone Weight | About 49g |
| Takeoff Weight | About 65g |
| Power Source | Electric (Lithium Battery) |
| Is Batteries Included | Yes (for helicopter) |
| Charging Voltage | 3.7V |
| Charging Time | About 90 minutes |
| Flight Time | 5~10 minutes |
| Remote Control | Yes |
| Remote Distance | 100m |
| Controller Mode | MODE2 |
| Controller Battery | 2 x 1.5 AA Battery (not included) |
| Control Channels | 4 channels |
| Motor Type | Brush Motor |
| Plugs Type | USB |
| State of Assembly | Ready-to-Go |
| Aerial Photography | Yes (for camera versions) |
| Video Capture Resolution | Other (4K on some models) |
| Operator Skill Level | Beginner, Intermediate, Expert |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Anti-wind Ability | <10km/h |
| Features | App-Controlled, Altitude Hold, Obstacle Avoidance, Trajectory Flight, Gesture Control |
| Recommended Age | 14+y |
10. User Tips
- For beginners, start with low speed mode and practice basic controls in an open, clear space.
- Always ensure the helicopter battery is fully charged for maximum flight time.
- If using the camera, ensure a stable Wi-Fi connection between your phone and the helicopter for smooth real-time transmission.
- The helicopter is designed to be durable and crash-resistant, making it suitable for learning.
11. Warranty and Support
For any issues or support needs, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
