1. Introduction
The MESTEK SL750B is a multi-functional handheld digital sound level meter designed for accurate noise measurement. It integrates essential features such as data retention, screen backlight, maximum value reset, and automatic shutdown, making it suitable for a wide range of applications. This manual provides detailed instructions to help you operate and maintain your device effectively.

SL750B Digital Noise Meter highlighting its 30-130dB range, MAX/MIN, quick response, data retention, adjustable speed, and A/C weighting.
2. Safety Information
Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not attempt to disassemble or modify the device. Repairs should only be performed by qualified personnel.
- Keep the device away from water and other liquids to prevent electric shock or damage.
- Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
- Use only the specified battery type (3x1.5V AAA).
- Remove batteries if the device will not be used for an extended period to prevent leakage.
- Keep the device out of reach of children.
3. Product Components
Familiarize yourself with the parts of your SL750B Digital Sound Level Meter:

Detailed diagram of the SL750B showing its dimensions and labeled components.
- Sponge Ball: Provides protection for the microphone and helps reduce wind noise.
- Microphone: High-precision capacitive microphone for accurate sound measurement. Features imported components and metal wrapping for stable performance.
- Display: Digital screen showing measurement values, MAX/MIN values, A/C measurement unit, measurement simulation strip, battery undervoltage indication, and fast/slow measurement indicators.
- FAST/SLOW Button: Toggles between Fast (125ms) and Slow (1000ms) sampling rates.
- dB/SONE Button: (Function not explicitly detailed, typically for switching between decibel and sone units or other related functions).
- MIN/MAX Button: Switches between current, minimum, and maximum measured values.
- A/C HOLD Button: Toggles between A-weighting and C-weighting, and activates data hold function.
- Power Switch: Turns the device on and off.

Detailed diagram of the SL750B's screen display with numbered indicators.
- 1. Automatic shutdown indicator
- 2. Fast measurement indicator
- 3. Measurement value
- 4. Max/Min value
- 5. Data retention (HOLD) indicator
- 6. Battery undervoltage indication
- 7. Slow measurement indicator
- 8. Measurement simulation strip
- 9. A/C measurement unit
- 10. Max/Min value display
4. Setup and Battery Installation
The SL750B requires 3x1.5V AAA batteries (not included) for operation.
- Locate the battery compartment on the back of the device.
- Open the battery compartment cover.
- Insert three 1.5V AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
Your package should include the following items:

Contents of the SL750B package.
- SL750B Digital Sound Level Meter (Host)
- Instruction Manual
- Packaging Box
5. Operating Instructions
This section details how to use the various functions of your SL750B.
5.1 Power On/Off
- Press the Power Switch button to turn the device on.
- Press and hold the Power Switch button to turn the device off.
- The device features an automatic shutdown function to conserve battery life.
5.2 A/C Weighting Mode
The SL750B supports both A and C frequency weighting modes.

A/C weighting mode for human auditory perception and mechanical noise.
- Press the A/C HOLD button to switch between A-weighting and C-weighting.
- A-weighting: Simulates the human ear's response to sound, commonly used for environmental noise assessment and occupational health.
- C-weighting: Provides a flatter response, suitable for measuring mechanical noise or peak sound pressure levels.
5.3 Fast/Slow Sampling Rate
The device offers adjustable time weighting for different measurement scenarios.

Adjustable FAST/SLOW time weighting modes.
- Press the FAST/SLOW button to toggle between Fast and Slow modes.
- FAST mode (125ms): Quick response, suitable for capturing rapidly changing noise levels.
- SLOW mode (1000ms): Slower response, ideal for measuring average noise levels over time.
5.4 MAX/MIN Measurement
Easily switch to view the maximum or minimum noise levels recorded during a measurement session.

Easy switching between maximum/minimum values.
- Press the MIN/MAX button to cycle through current, minimum, and maximum recorded values.
- To reset the MAX/MIN values, short press the MIN/MAX button while in MAX or MIN display mode.
5.5 Data Hold
The data retention function allows you to freeze the current measurement on the display.
- Press the A/C HOLD button (short press) to activate or deactivate the data hold function. The "HOLD" indicator will appear on the display when active.
5.6 Screen Backlight
The highlight screen backlight enables measurements in dimly lit environments.

Measurements can be taken in dim environments with the highlight screen backlight.
- The backlight typically activates automatically when the device is in use or can be toggled with a specific button press (refer to on-device markings if available, as no dedicated backlight button is listed).
5.7 Common Noise Range Reference
For context, here is a reference table for common noise levels:

Common noise range reference table.
6. Technical Specifications
Detailed technical parameters for the MESTEK SL750B Digital Sound Level Meter:

Technical parameters of the SL750B.
| Parameter | Value |
|---|---|
| Product Name | High precision noise detector |
| Model | SL750B (A/C-Weighted; colour screen) |
| Measurement Range | 30-130dB |
| Sampling Rate FAST | 125ms |
| Sampling Rate SLOW | 1000ms |
| Noise Accuracy | ± 2.0dB |
| Reference Sound Pressure Standard | 94dB/1KHz |
| Frequency Response | 31.5Hz~8KHz |
| Resolution | 0.1dB |
| Power Supply | 3x1.5V AAA (not included) |
| Working Current | ≤8mA |
| Working Temperature | 0-40 °C |
| Working Humidity | ≤80% RH |
| Storage Temperature | -20~60 °C |
| Storage Humidity | ≤75% RH |
| Dimensions | 206x53x34mm |
| Weight | Approximately 180g (Excluding battery) |
7. Maintenance and Care
Proper maintenance ensures the longevity and accuracy of your sound level meter.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Sponge Ball: The sponge ball protective cover helps maintain measurement accuracy and protects the microphone. Ensure it is clean and free from damage. Replace if necessary.

Sponge ball protective cover for the microphone.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries.
- Microphone Care: The capacitive microphone is a sensitive component. Avoid touching it directly and ensure it is always protected by the sponge ball.
8. Troubleshooting
If you encounter issues with your SL750B, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Dead or incorrectly installed batteries | Check battery polarity; replace with fresh AAA batteries. |
| Inaccurate readings | Microphone obstructed or damaged; incorrect weighting/sampling mode; environmental factors (wind) | Ensure sponge ball is clean and intact; verify A/C weighting and Fast/Slow modes are appropriate for the measurement; minimize wind interference. |
| Display is dim or blank | Low battery; backlight off | Replace batteries; check if backlight needs to be activated (if applicable). |
| Device shuts off unexpectedly | Automatic shutdown activated; low battery | This is a normal power-saving feature. Replace batteries if the issue persists frequently. |
9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for using sound level meters effectively:
- For consistent readings, always hold the meter at arm's length, pointing the microphone towards the sound source.
- Avoid blocking the microphone with your hand or other objects.
- When measuring outdoor noise, use the sponge ball to minimize wind interference, which can cause artificially high readings.
- Understand the difference between A-weighting (human hearing) and C-weighting (overall sound pressure) to choose the correct setting for your application.
- For fluctuating noise, use the FAST response mode to capture peaks, and the SLOW response mode for a more averaged reading.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.