1. Important Safety Information
Please read and understand all safety instructions before using the STUOGYUM DC101 Digital Camera. Failure to follow these instructions may result in injury, damage to the product, or loss of data.
Battery Safety Tips
For your better experience with this product, please pay attention to the following safety tips. If the battery pack is mishandled, it can burst, cause a fire, or even chemical burns. Observe the following cautions:
- Do not disassemble the battery.
- Do not crush, expose to any shock or force (e.g., hammering, dropping, stepping on it).
- Do not short circuit or allow metal objects to come into contact with the battery terminals.
- Do not expose to high temperatures above 60°C (140°F), such as direct sunlight or inside a car parked in the sun.
- Do not incinerate or dispose of in fire.
- Do not handle damaged or leaking lithium-ion batteries.
- Be sure to charge the battery pack using a genuine battery charger or a device that can charge the battery pack.
- Keep the battery pack out of the reach of small children.
- Keep the battery pack dry.
- Replace only with the same or equivalent type recommended by the seller.
- Dispose of used battery packs promptly as described in the instructions and local regulations.
WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
2. Product Overview
The STUOGYUM DC101 is a versatile 4K digital camera designed for photography and video creation, featuring a 48MP sensor, autofocus, a 3.0-inch touch screen, and a 180-degree flip screen.

Camera Parts Diagram

Camera Part Descriptions
| No. | Camera Part | Function |
|---|---|---|
| 1 | Power Button | Powers the camera on/off. |
| 2 | Shutter Button | In still image mode: Half press to focus, full press to take photo. In video mode: Start/end recording. In playback mode: Play video file. |
| 3 | Zoom In (+) | Electronic zoom in, enlarge photo, increase video playback volume. |
| 3 | Zoom Out (-) | Electronic zoom out, zoom out photo, decrease video playback volume. |
| 4 | Mode Button | Switches camera modes: Still image mode, video recording mode, playback mode, camera system setup. |
| 5 | Up/Down/Left/Right Keys | Up key: Turn on/off fill light, menu selection. Down key: Shortcut delete key, menu selection. Left key: Timer selfie button (sets 2s, 5s, or 10s countdown in still image mode), menu selection. Right key: Continuous shooting button (takes 3 photos in a row in still image mode), menu selection. |
| 6 | OK Button | Confirms selection, pauses or resumes recording (video recording mode). |
| 7 | Menu Button | Enters or exits menu settings. |
| 8 | Hook | Attachable camera strap. |
| 9 | USB Type-C Port | Type-C connection for data transfer and charging. |
| 10 | Micro SD Card Slot | Insert Micro SD card. |
| 11 | Battery Cover | Install battery. |
| 12 | Tripod Mount | Standard screw port for connecting a tripod. |
| 13 | LED Fill Light | Provides additional illumination. |
| 14 | MIC Port | For connecting an external microphone cable to record audio. |
| 15 | Indicator Light | Blue light: Camera is working. Red light: Camera is charging. Red light off: Fully charged. Flashing red light: No battery or battery not in place. |
| 16 | Speaker | Plays sound. |
3. Setup
3.1. How to Insert and Remove the Battery
- Open the battery cover.
- Insert the battery and keep pressing until it is locked by the battery lock.
- Close the battery cover.
- To remove the battery, push the battery lock lever and then remove the battery.
3.2. How to Charge the Camera
- Use the Type-C cable and charger included in the package to charge the camera.
- When the camera indicator light is red, it means the camera is charging.
- When the camera light goes out, it means the camera is fully charged.
- If the red light flashes quickly while charging, the camera has no battery installed or the battery is not in place.
- For the first time, please use the camera after it is fully charged.
3.3. How to Insert and Remove Micro SD Card
- Insert the card as shown in the illustration, keep pressing until the Micro SD Card is locked. You will hear a "click" sound.
- The camera supports 4-256 GB Micro SD cards. Class 10 is recommended; U3 level cards are not recommended.
- When the Micro SD card is used for the first time, please format it in the camera.
- Please insert the Micro SD card when the camera is turned off, then turn it on.
3.4. How to Format the Micro SD Card
- In still image mode, press the "Mode" button 3 times to enter the system setting interface and select the "Format" option.
- Press the "OK" button to confirm formatting.
- Press the mode button again to exit the system settings page.
4. Operation
4.1. Still Image Mode
How to Take Still Images
- Ensure the camera is in still image mode (default when turned on).
- Press the shutter button halfway down to focus. The focus frame will appear yellow. When the image is in focus, the frame will turn green.
- Press the shutter button fully down to shoot an image.

How to Play Back and Delete Still Images
- Press the mode button 2 times in still image mode to enter playback mode.
- Select an image by pressing the Left and Right keys.
- To delete a photo, press the MENU button while viewing the picture.
- After viewing photos, press the mode button twice to exit playback mode.
4.2. Video Recording Mode
How to Shoot Video
- Ensure the camera is in video recording mode (press the mode button once after turning on to enter this mode).
- Press the shutter button to start/end video recording.
- Press the OK button to pause/resume video recording.
How to Play Back and Delete Recorded Videos
- Press the MODE button once to enter playback mode (when the camera is in video recording mode).
- Select a video by pressing the Left and Right keys.
- To delete a video, press the MENU button while viewing the video.
- After viewing the video, press the MODE button twice to exit playback mode.
5. Connecting to a Computer
5.1. How to Download Still Image/Video Files to Computer (MSDC Mode)
- Use the Type-C cable (included in the package) to connect the camera to your computer while the camera is on.
- After the connection is completed, a dialog box will pop up randomly on the camera screen.
- Select "MSDC" from the options. You can then download the files from the camera to your computer.
- After downloading, remove the cable, and the camera will exit MSDC mode.
5.2. How to Use the Camera as a Webcam
- Use the Type-C cable (included in the package) to connect the camera to your computer while the camera is on.
- After the connection is completed, a dialog box will pop up randomly on the camera screen.
- Select "PC camera" from the options. You can then use the camera as a webcam on your computer.
- After using, remove the cable, and the camera will exit webcam mode.

6. Menu Settings
6.1. Still Image Mode Menu Settings
- Press the "MENU" button in still image mode to enter the image menu settings.
- After making your selections, press the "MENU" button again to exit the image menu setting.
| Option | Description |
|---|---|
| Mode Set | 9 shooting scenes to choose from; auto mode is the default. |
| Resolution | Select image resolution: 48MP, 44MP, 36MP, 24MP, 20MP, 16MP, 12MP, 10MP, etc. |
| Beauty Face | Turn on/off beauty face effect; default is off. |
| Self Timer | Set selfie countdown timer to 2s, 5s, or 10s; default is off. |
| White Balance | Auto mode is recommended; default is Auto. |
| Anti-Shake | Turn on/off anti-shake; default is on. |
| Effect | Photography special effects. |
6.2. Video Recording Mode Menu Settings
- Press the "MENU" button in video recording mode to enter the video menu settings.
- After making your selections, press the "MENU" button again to exit the video menu setting.
| Option | Description |
|---|---|
| Mode Set | 9 shooting scenes to choose from; auto mode is the default. |
| Movie Size | Select video resolution: 4K, 2.7K, Full HD 1080P, HD 720P, VGA 480P, etc. |
| Beauty Face | Turn on/off beauty face effect; default is off. |
| Exposure | Default is 0. |
| White Balance | Auto mode is recommended; default is Auto. |
| Effect | There are 20 shooting effects to choose from; normal effect is default. |
| ISO | Select ISO sensitivity: AUTO, 100, 200, 400; default is AUTO. |
6.3. Camera System Settings
- Press the mode button 3 times in still image mode to enter the camera system settings.
- After making your selections, press the mode button to exit the system setting.
| Option | Description |
|---|---|
| Language | Multiple languages for your choice. |
| Set Date | Set date and time. Choose whether to display the date watermark on photos (off by default). |
| Power Save | Camera automatically shuts down after 1Min, 3Min, or 5Min of no operation; 5Min is default. |
| Exposure | Key sound default is off. |
| Frequency | 60Hz/50Hz; default is 60Hz. |
| Format | Choose whether to format the Micro SD card. |
| Default | Resets camera to factory settings. |
7. Specifications
| Feature | Detail |
|---|---|
| Video Resolution | 4K, 2.7K, 1080P Full HD, 720P HD, 480P VGA |
| Image Resolution | 48M, 44M, 36M, 24M, 20M, 16M, 12M, 10M, 7M-Wide, 5M, 3M, 2M-Wide |
| Memory Card | Support Micro SD card (4GB to 256 GB, Class10 recommended) |
| File Format | JPG (Images), AVI (Movies) |
| Shooting Modes | Single, Continuous shooting, 2s timer, 5s timer, 10s timer |
| Electronic Zoom | 16X |
| USB Port | Type-C |
| Display | 2.9-inch Screen (3-inch IPS screen, 4:3 from description) |
| Battery Type | Rechargeable Li-Ion Battery (3.7V 700mAh Li-ion) |
| Focal Length | f=3.37mm (Fixed Focus) |
| Aperture | F/2.2 |
| Power Save | Auto power off in 3Min/5Min/10Min |
| Supporting Language | Japanese, French, German, Spanish, Portuguese, English, Turkish, Latin American Spanish, Simplified Chinese, Traditional Chinese Style, Nederlands, Polski, Turkce |
| Operating System Requirements | Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Mac 10.2 |
| Weight | 600G (0.589 kg package weight) |
| Application Scenarios | Indoor, Scenery, Portrait, Architecture |
| Special Feature | Face Recognition, Beauty Make-up Mode, None |
| Image Stabilization | Electronic Image Stabilization |
| Battery Life | Taking Video ≤ 90mins, Taking Photos ≤ 150mins |
8. User Tips
- Memory Card: Ensure the included 32GB TF card is properly inserted and formatted before first use to avoid data loss or recording issues.
- Battery Life: For extended video recording sessions, consider carrying a spare charged battery or a portable power bank.
- Webcam Use: When using as a webcam, ensure the camera is securely mounted (e.g., on a tripod) and connected via the Type-C cable for stable streaming.
- Autofocus: Practice half-pressing the shutter button to achieve focus before fully pressing to capture sharp images, especially in challenging lighting conditions.
- Fill Light: Utilize the built-in LED fill light in low-light environments to improve image brightness and clarity.
9. Troubleshooting
If you encounter any issues with your STUOGYUM DC101 camera, please refer to the following common troubleshooting steps:
- Camera not turning on: Ensure the battery is fully charged and correctly inserted. Check the battery indicator light.
- Cannot take photos/record videos: Verify that a Micro SD card is inserted and has sufficient free space. Format the SD card if it's new or causing issues.
- Blurry images: Ensure the camera is properly focused by half-pressing the shutter button until the focus frame turns green. Use the anti-shake feature if enabled.
- Computer not recognizing camera: Check the Type-C cable connection. Ensure the camera is turned on and the correct mode (MSDC or PC camera) is selected on the camera screen. Try a different USB port on your computer.
- Poor audio quality: Ensure the internal microphone is not obstructed. If using an external microphone, check its connection to the MIC port.
- Screen issues: If the screen is unresponsive or displaying incorrectly, try restarting the camera. If the problem persists, perform a factory reset via the system settings (Option 7: Default).
- Camera freezing: Remove and reinsert the battery to force a restart. If frequent, consider formatting the SD card or performing a factory reset.
If these steps do not resolve your issue, please contact customer support for further assistance.
10. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution. Do not use abrasive cleaners or solvents.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if the camera will not be used for an extended period.
- Water Exposure: This camera is not waterproof. Avoid exposing it to water, rain, or high humidity.
- Handling: Handle the camera with care to prevent drops or impacts, which can damage internal components.
11. Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for warranty claims.