Introduction
Thank you for choosing the VASAGLE Wall-Mounted Coat Rack. This manual provides essential information for the safe assembly, operation, and maintenance of your new coat rack. Please read these instructions carefully before assembly and retain them for future reference.
Figure 1: VASAGLE Wall-Mounted Coat Rack in an entryway setting.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or defective.
- Mount this item only on a solid wall. If mounting on plasterboard, consult a hardware store for appropriate anchors and screws.
- Do not exceed the maximum static load capacities: Shelf: 20 kg (44 lbs), Each Hook: 5 kg (11 lbs), Hanging Rail: 15 kg (33 lbs), Total: 45 kg (99 lbs).
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Always use appropriate tools for assembly.
- Periodically check all connections and fasteners to ensure they remain tight.
Parts List
Please verify that all components are present before beginning assembly.
Figure 2: Exploded view of components and assembly steps.
| Label | Description | Quantity |
|---|---|---|
| A | Top Shelf | 1 |
| B | Back Panel | 2 |
| C | Left Metal Frame | 1 |
| D | Right Metal Frame | 1 |
| E | Hanging Rail | 1 |
| F | Hooks | 10 |
| - | Accessory Kit (screws, wall anchors, etc.) | 1 |
Setup: Assembly Instructions
Follow these steps for quick and easy assembly. It is recommended to have two people for wall mounting.
- Assemble the Rack Frame: Attach the back panels (B) to the metal frames (C and D) using the provided screws from the accessory kit. Ensure all connections are secure.
- Attach the Top Shelf and Hanging Rail: Secure the top shelf (A) to the assembled frame. Then, attach the hanging rail (E) to its designated position on the frame.
- Install Hooks: Slide the 10 movable hooks (F) onto the back panels. These hooks are removable and their spacing can be adjusted as needed.
- Prepare for Wall Mounting: Choose a solid wall location for installation. Use a pencil to mark the drilling points on the wall, aligning with the pre-drilled holes on the metal frames (C and D).
- Drill Holes: Using an appropriate drill bit for your wall type, drill holes at the marked positions.
- Insert Wall Anchors: Insert the provided wall anchors into the drilled holes. If mounting on plasterboard, ensure you use suitable plasterboard anchors (not included in the standard kit).
- Mount the Coat Rack: Carefully align the coat rack with the wall anchors and secure it to the wall using the provided screws. Tighten all screws firmly to ensure stability.
Important Safety Note:
Please mount this item on a solid wall. If you intend to mount it on plasterboard, you must first obtain the correct type of screws and anchors from a hardware store to ensure secure installation and prevent damage or injury.
Operating Instructions
The VASAGLE Wall-Mounted Coat Rack offers a versatile 3-in-1 design for organizing your entryway, bedroom, or bathroom.
Figure 3: The 3-in-1 design with shelf, hanging bar, and movable hooks.
Using the Top Shelf
- The top shelf provides extra space for displaying decorative items, storing small boxes, or placing frequently used items like keys, wallets, or mail.
- Do not exceed the maximum static load capacity of 20 kg (44 lbs) for the top shelf.
Using the Hanging Rail
- The integrated clothes rail is ideal for hanging garments on hangers, such as jackets, shirts, or scarves.
- Ensure the total weight on the hanging rail does not exceed 15 kg (33 lbs).
Using the Movable Hooks
- The coat rack features 10 removable hooks. These hooks can be slid along the back panels, allowing you to adjust their spacing to accommodate different items like bags, coats, hats, or umbrellas.
- Each individual hook has a maximum static load capacity of 5 kg (11 lbs).
- Distribute weight evenly across the hooks and avoid overloading any single hook.
General Usage Tips:
- Distribute the weight of items evenly across the shelf, rail, and hooks to maintain stability and prevent damage.
- Avoid hanging wet clothes directly on the rack for extended periods, as this may affect the material over time.
Maintenance
To ensure the longevity and appearance of your VASAGLE Wall-Mounted Coat Rack, follow these simple maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by wiping dry. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Dusting: Regularly dust the shelf and metal components with a dry, soft cloth.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Avoid Moisture: While suitable for bathrooms, avoid prolonged exposure to excessive moisture. Ensure good ventilation to prevent water damage to the particleboard.
Troubleshooting
If you encounter any issues with your coat rack, please refer to the following common solutions:
- Rack feels wobbly or unstable:
- Check all assembly screws and wall mounting screws. Tighten any loose fasteners.
- Ensure the rack is mounted on a solid wall and appropriate anchors were used.
- Verify that the total weight on the rack does not exceed the maximum static load capacity.
- Hooks are difficult to move or slide:
- Ensure the hooks are properly seated on the back panels.
- Clean the grooves of the back panels and the hook mechanisms to remove any dust or debris.
- Damage to wall after mounting:
- This can occur if the rack was overloaded or not properly secured to a solid wall. Review the "Safety Information" and "Setup" sections.
If you continue to experience problems, please contact customer support for assistance.
Specifications
Figure 4: Product dimensions and load capacities.
| Feature | Detail |
|---|---|
| Color | Rustic Brown, Black |
| Material | Particleboard, Steel |
| Overall Dimensions (D x W x H) | 30 x 80 x 42 cm (11.8 x 31.5 x 16.5 inches) |
| Top Shelf Dimensions (D x W x H) | 30 x 80 x 1.5 cm (11.8 x 31.5 x 0.6 inches) |
| Product Weight | 4.2 kg (9.3 lbs) |
| Max. Static Load Capacity (Shelf) | 20 kg (44 lbs) |
| Max. Static Load Capacity (per Hook) | 5 kg (11 lbs) |
| Max. Static Load Capacity (Hanging Rail) | 15 kg (33 lbs) |
| Max. Total Static Load Capacity | 45 kg (99 lbs) |
| Installation Method | Wall-Mounted Assembly |
User Tips
- Consider the placement of your coat rack carefully. Entryways are ideal for quick access to coats and bags, while bedrooms can benefit from extra hanging space for daily outfits.
- Utilize the movable hooks to customize your storage. Group smaller items together or spread them out for larger garments.
- The top shelf is perfect for displaying small plants, framed photos, or storing decorative baskets to keep clutter at bay.
Warranty and Support
For any questions regarding assembly, missing parts, or product performance, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims, if applicable.
