1. Introduction
Thank you for choosing the MESTEK Carbon Dioxide Detector. This device is designed to monitor air quality by accurately detecting carbon dioxide (CO2) levels, as well as temperature and humidity, in various environments. Equipped with a high-definition large screen display and a non-dispersive infrared absorption sensor, it provides real-time data to help you maintain a healthy living and working space. This manual will guide you through the setup, operation, and maintenance of your new detector.

2. Key Features
- Non-dispersive Infrared Absorption (NDIR) Sensor: For accurate and reliable CO2 detection.
- Real-time Monitoring: Provides instant readings of CO2 concentration, temperature, and humidity.
- High-Definition Large Screen Display: Clear and intuitive display of all measured parameters.
- Built-in Lithium Battery: 2400mAh capacity for portable use, offering over 10 hours of operating time.
- Type-C USB Charging: Convenient and fast charging, approximately 4 hours for a full charge.
- Dual Channel Air Convection: Ensures fast air circulation for more accurate measurements.
- Sound and Analog Bar Alarm: Provides visual and audible alerts for elevated CO2 levels with a 3-color indicator.
- High-Performance Chip: Ensures quick reaction and accurate measurement.
- Portable Design: Compact and easy to carry for monitoring in various environments.


3. Package Contents
Please check the package for the following items:
- 1x MESTEK CO2 Detector (Model: C02)
- 1x USB Type-C Charging Cable
- 1x User Manual (this document)
4. Setup
4.1 Initial Charging
Before first use, fully charge the device. Connect the provided USB Type-C cable to the detector's charging port and plug the other end into a standard USB power adapter (5V/1A) or a computer USB port. The charging time is approximately 4 hours.

4.2 Placement
For optimal performance and accurate readings, place the detector in an area with good air circulation, away from direct drafts, heat sources, or areas where CO2 might accumulate unnaturally (e.g., directly next to a person's mouth or a plant). The device is suitable for various environments:
- Indoor environments (homes, offices)
- In-car environments
- Baby rooms
- Classrooms

5. Operation
5.1 Power On/Off
Press and hold the power button (usually located on the side or top) for a few seconds to turn the device on or off. The display will light up upon activation.
5.2 Display Interpretation
The high-definition screen displays the following information:
- CO2 Concentration: Shown in Parts Per Million (PPM).
- Temperature: Displayed in degrees Celsius (°C) or Fahrenheit (°F).
- Humidity: Displayed as a percentage (%).
- Analog Bar: A visual indicator of CO2 levels, often color-coded.
- Alarm Icon: Indicates when CO2 levels exceed a safe threshold.

5.3 CO2 Level Indicator and Alarm
The device uses a 3-color alarm system and an analog bar to visually indicate CO2 levels and potential air quality issues:
- Green (0-1000 PPM): Fresh air, good ventilation.
- Orange (1000-2000 PPM): Turbid air, indicating a need for ventilation.
- Red (2000-5000 PPM): Serious air pollution, requiring immediate ventilation.
When CO2 levels reach the orange or red thresholds, the device will activate a sound alarm and the analog bar will change color accordingly.

Understanding the physiological response to CO2 levels can help in interpreting the readings:

5.4 Calibration
The device supports baseline calibration. Refer to the full product manual (if available) or manufacturer's website for detailed calibration instructions if you suspect readings are inaccurate or after prolonged use.
5.5 Product Demonstration Video
6. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place within the specified storage environment (-10~50°C, 5%~95%RH).
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, especially if storing for extended periods.
- Avoid Obstructions: Ensure the air vents on the device are not blocked to allow for proper air circulation and accurate readings.
7. Troubleshooting
If you encounter issues with your MESTEK CO2 Detector, please try the following:
- Device not turning on: Ensure the battery is charged. Connect the device to a power source using the USB Type-C cable and try again after a few minutes.
- Inaccurate readings:
- Ensure the device is placed in an area with good air circulation, away from direct drafts or heat sources.
- Perform a baseline calibration if available and necessary (refer to manufacturer's guidelines).
- Check for any obstructions blocking the air vents.
- No display: Check if the device is powered on and fully charged.
- Alarm constantly active: Open windows or doors to ventilate the area. If the alarm persists in a well-ventilated area, consider performing a calibration.
If problems persist, please contact customer support.
8. Specifications
| Parameter | Value |
|---|---|
| Product Name | Carbon dioxide detector |
| Detect Gas | CO2 |
| Gas Resolution | 1 PPM |
| Gas Measurement Range | 400-5000 PPM |
| Temperature Resolution | 0.1°C / 0.2°F |
| Temperature Measurement Range | 0~50°C / 32~122°F |
| Humidity Resolution | 1%RH |
| Humidity Measurement Range | 0-100% |
| Calibration Method | Baseline calibration |
| Power Supply | 3.7V/18650 lithium battery |
| Charging Port | Type-C |
| USB Charging | 5V/1A |
| Charging Time | About 4 hours |
| Operating Hours | > 10 hours |
| Response Time | About 30 seconds |
| Operating Temperature | 0~50°C |
| Working Humidity | 0~70%RH |
| Alarm Method | Sound, Analog bar |
| Storage Environment | -10~50°C (5%~95%RH) |
| Size | 110 x 76 x 35 mm |
| Weight (including battery) | 186g |
| Certifications | CE, RoHS |

9. User Tips
- For the most accurate CO2 readings, ensure the device is placed at a height representative of the breathing zone and away from direct human exhalation.
- Regularly ventilate enclosed spaces, especially when the detector indicates elevated CO2 levels, to improve air quality and prevent discomfort.
- Keep the device charged to ensure continuous monitoring, particularly in critical environments like baby rooms or offices.
10. Warranty and Support
This MESTEK product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official MESTEK website or contact your retailer. Please retain your proof of purchase for warranty claims.