1. Product Introduction
The RETEKESS TD113 Watch Pager and TD033 Call Button system is designed to streamline communication in various service environments such as cafes, bars, and hookah lounges. The TD113 watch receiver features a touch screen, IP67 waterproof rating, and magnetic charging, while the TD033 call button offers multiple functions for efficient service calls.
1.1 Watch Host Overview
The TD113 watch host includes the following components:
- Power button: Long press to turn on/off. Short press to turn on/off the screen.
- Capacitive touch screen: For interactive operation.
- Strap mounting holes: For attaching the watch strap.
- Buzzer sound hole: For audible alerts.
- Magnetic charging port: For convenient charging.

Image: RETEKESS TD113 Watch Pager and TD033 Call Button system with features highlighted: Touch Screen, IP67 Waterproof, Connect to PC.

Image: TD113 Watch Pager features: Touch screen capable, call priority response, various reminders modes, IP67 waterproof, magnetic charging.
2. Setup
2.1 Charging the Watch Pager
Attach the magnetic charging connector to the charging port on the back of the watch. Plug the USB charging cable into a power adapter (5V 1A recommended) and connect it to a power source to begin charging. The watch pager has a 500mAh Li-ion battery, offering up to 48 hours of standby time.

Image: TD113 Watch Pager with magnetic charging cable connected.
Important: Wipe the watch's charging port before charging to prevent dirt from affecting efficiency and extend its lifespan.

Image: Hand wiping the magnetic charging port of the TD113 Watch Pager.
2.2 Wearing Methods
The watch pager offers versatile wearability with a triple-mode design:
- Wristband: The strap is detachable and can be installed or removed through the strap holes.
- Back Clip / Chest Hanging: Install the back clip onto the watch. Pass a lanyard through the lanyard port on the back clip to wear it on your chest.

Image: TD113 Watch Pager worn on a server's apron with a clip, demonstrating convenience and accessibility.
3. Operating Instructions
3.1 Watch Pager Functions
3.1.1 Startup and Shutdown
- Startup: Press and hold the power button for 3 seconds. The screen will display the version model and machine ID, then enter the main interface.
- Shutdown: Access the main menu and select the shutdown function.
- Force Shutdown: If the screen is on, press and hold the power button for 6 seconds to force shutdown.
- Screen On/Off: Short press the power button to turn the screen on/off. The screen automatically turns off after 15 seconds of inactivity.
3.1.2 Main Interface Navigation
The top status bar displays the date, wireless switch status, USB connection icon (indicating charger connection), and battery power (green when charging). The main menu switch button is displayed for 5 seconds by default. Long press to enter the main menu interface.

Image: TD113 Watch Pager displaying 15 function interfaces including power, add contact, message, trash, globe, timer, volume, calendar, WiFi, calculator, refresh, brightness, clock, settings, and watch face.
3.1.3 Registration (Pairing Call Buttons)
From the main menu, navigate to the 'Register' icon. Select the type of calling device (Pager, Evaluator, or Keyboard) you wish to register. Follow the on-screen prompts to enter the ID number and press the call button on the TD033 to complete registration. The watch supports OOK or FSK modes for registration.
Video: Demonstration of pairing the TD113 Watch Pager with a TD033 Call Button, showing menu navigation and successful registration.
3.1.4 Deletion
From the main menu, navigate to the 'Delete' icon. You can choose to delete a single device, a specific keyboard, or all registered devices. Follow the on-screen prompts to confirm deletion.
3.1.5 Time and Date Settings
Access the 'Time Setting' and 'Date Setting' icons from the main menu to adjust the watch's time and date. The watch supports 12/24-hour mode and various date display formats (MM/DD/YYYY, DD/MM/YYYY, MM.DD,YYYY, DD.MM,YYYY, YYYY/MM/DD).
3.1.6 Language Setting
Select the 'Language' icon from the main menu to choose your preferred language. Supported languages include Chinese, English, French, Italian, German, Spanish, Russian, Portuguese, and Japanese.
3.1.7 Sending Text Messages
From the main menu, select the 'Message' icon. Enter the watch ID of the recipient and choose a pre-defined message to send. Both sender and receiver must be in 'PACK' wireless mode and on the same channel for correct reception.
3.1.8 Watch Dial Selection
Access the 'Theme' icon from the main menu to browse and select different watch dial styles for the standby interface.3.1.9 Brightness Adjustment
Select the 'Brightness' icon from the main menu to adjust the screen brightness from 0 (lowest) to 100 (highest).
3.1.10 Advanced Settings
The 'Settings' menu offers various configurable options:
- Wireless Mode: Set the frequency modulation mode (FSK, OOK, PACK).
- Working Mode: Configure how the watch receives calls (Keyboard, Single button, Multiple buttons, Blacklist).
- Key Value Settings: Set call button key values and service types.
- Call Filtering Time: Set the time interval for valid calls from the same pager/button (2-10 seconds).
- List Mode: Choose call information sorting mode (Active view or Queue view).
- Timeout Settings: Set call information retention time and background color for timed-out calls.
- Automatic Removal Time: Set a time after which call information is automatically removed from the list (0-30 minutes).
- Date Display Format: Choose the format for date display.
- Local Number (Watch ID): Set the watch's local ID for communication.
- About: View watch model and firmware version information.
3.1.11 Reminder Settings
Access the 'Reminder' icon from the main menu to configure sound volume, vibration level, reminder duration (0-30 seconds), and sound type (6 modes available).
3.1.12 Scheduled Tasks
Select the 'Timer' icon from the main menu to set up scheduled tasks such as alarms, power off, wireless off, or wireless on. You can set the time and specific days for these tasks.
3.1.13 Calculator
Access the 'Calculator' icon from the main menu to perform basic calculations. Use 'C' to clear the display and '=' to get the result.
3.1.14 Wireless Switch
Select the 'Wireless Switch' icon from the main menu to toggle the wireless receiving function on or off.
3.1.15 Call Record View
From the standby interface, click the top status bar to view the latest 10 call records received in OOK/FSK mode. Swipe up and down to browse history.
3.2 TD033 Call Button Functions
The TD033 call button offers four essential functions: Pay, Order, Call, and Cancel. These functions streamline customer interactions and enhance operational efficiency.
Image: TD033 Call Button with four functions: Pay, Cancel, Call, Order.
4. Maintenance
4.1 Cleaning
Regularly wipe the watch's charging port to prevent dirt accumulation, which can affect charging efficiency and extend the product's lifespan.
4.2 Battery Care
- Turn off the watch pager before charging.
- Charge batteries within a specified environment temperature of 10°C~40°C. Charging below 0°C is prohibited.
- Rechargeable batteries should be charged with the dedicated charger provided.
5. Troubleshooting
If you encounter issues, please refer to the relevant sections in the operating instructions for specific settings. Common issues often relate to incorrect wireless mode settings, channel mismatches, or registration problems.
- No Call Reception: Check if the watch is in the correct wireless mode (OOK/FSK/PACK) and if the channel number matches the call button. Ensure the call button is properly registered.
- Screen Issues: If the screen is unresponsive, try a force shutdown (press and hold power button for 6 seconds).
- Charging Problems: Ensure the magnetic charging connector is clean and properly aligned. Use the provided charging cable and a 5V 1A power adapter.
- Incorrect Time/Date: Adjust settings via the 'Time Setting' and 'Date Setting' menus.
- Pager Not Registering: Ensure the watch is in the correct registration mode (OOK or FSK) and follow the registration steps carefully.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | retekess |
| Model Number | TD113 |
| Size | 37*64.5*16mm |
| Material | ABS+PC |
| Color | Black |
| Modulation | OOK/FSK Mode (optional) |
| Working Frequency | 433.92MHz |
| Interactive Mode | Capacitive touch |
| Display | 1.69 inch 204*280 TFT color screen |
| Battery | 500mAh Li-ion Battery (3.7V 450mAh) |
| Water Resistance | IP67 rating |
| Button | Power button |
| Receiving Sensitivity | -120dbm |
| Transmit Power | 10dBm Max |
| Charging Port | Magnetic charging |
| Charging Voltage | 5V 1A |
| Receiving Current | 16mA |
| Alarm Current | 60-120mA |
| Working Current | 15mA-60mA |
| Shutdown Current | < 50uA |
| Communication Distance | 80m Max |
| Attribute | Value |
|---|---|
| Model Number | TD033 |
| Operating Frequency | 433MHz |
| Wireless Coding | 1527 |
| Operating Voltage | DC12V (battery 23A12V) |
| Indicator Light | Red |
| Range | 80m (open area) |
| Size | 70*70*16mm |
| Key Type | 1/2/3/4 series key |
| Color | Black |
7. Safety Information
7.1 RF Energy Exposure and Product Safety Guide
Before using this device, please read this guide which contains important operating instructions for safe usage, control information, and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. User instructions should accompany the device when transferred to other users.
7.1.1 US FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
7.1.2 Canadian IC Requirements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
7.1.3 European CE Requirements
HENAN ESHOW ELECTRONIC COMMERCE CO., LTD declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at the internet address: www.retekess.com.
7.1.4 Disposal Environmental
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws and rules in your area.
7.1.5 RF Safety
Keeping the radio at a proper distance is important as RF exposure decreases with increasing distance from the proper antenna. A proper antenna is an antenna supplied with this radio by the manufacturer or specifically authorized by the local authority for use with this radio. This radio can only be operated by use of an antenna of a type and maximum (or lesser) gain approved for the transmitter under regulations and rules. This transmitter must operate with the antenna(s) documented and in Push-to-Talk and body-worn configurations as documented. Using authorized accessories is important because the use of Non-Retekess accessories may result in exposure levels which exceed the IEEE/ICNIRP RF exposure limits.
Transmit no more than the rated duty factor 50% of the time. Transmitting necessary information or less is important because the radio generates measurable RF energy exposure only when transmitting in terms of measuring for standards compliance. For users who wish to further reduce their exposure, some effective measures to reduce RF exposure include:
- Reduce the amount of time spent using your wireless device.
- Use a speakerphone, earpiece, headset, or other hands-free accessory to reduce proximity to the head (and thus head exposure). While wired earpieces may conduct some energy to the head and wireless earpieces also emit a small amount of RF energy, both wired and wireless earpieces remove the greatest source of RF energy (handheld device) from proximity to the head and thus can greatly reduce total exposure to the head.
- Increase the distance between wireless devices and your body.
7.1.6 For Handheld Transmitter Only
Persons with pacemakers, implantable cardioverter defibrillators (ICDs) or other active implantable medical devices should:
- Consult with their physicians regarding the potential risk of interference from radio frequency transmitters, such as portable radios (poorly shielded medical devices may be more susceptible to interference).
- Turn the radio OFF immediately if there is any reason to suspect that interference is taking place.
- Do not carry the radio in a chest pocket or near the implantation site, and carry or use the radio on the opposite side of the body from the implantable device to minimize the potential for interference.
7.1.7 Hearing Aids and Other Medical Devices
Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
7.1.8 Protect Your Hearing

- Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Use carefully with the earphone; excessive sound pressure from earphones and headphones can cause hearing loss.
CAUTION: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
7.1.9 Battery Safety
- WARNING: KEEP NEW OR OLD USED BATTERIES OUT OF REACH OF CHILDREN.
- In the event of a battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice immediately.
- If a radio or a battery has been submerged in water, please dry and clean it before use. Do not dry the radio or battery with an appliance or heat source, such as a hair dryer or microwave oven. If the radio has been submersed in a corrosive substance (e.g., saltwater), rinse the radio and battery in fresh water, then dry them.
7.1.10 Children's Products

WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years old.
8. User Tips
No specific user tips were available from provided reviews or Q&A content.
9. Warranty and Support
9.1 Authorized Accessories
For a list of Retekess-approved accessories for your radio model, visit the website http://www.retekess.com.
9.2 Further Assistance
Contact Retekess for assistance regarding repairs and service. For detailed documentation, including a PDF user manual, please refer to the official resources. A PDF user manual is available at this link.