Selfieshow C13/C13d

Selfieshow C13/C13d Multifunctional Stable Tripod Selfie Stick User Manual

Model: C13/C13d | Brand: Selfieshow

Introduction

Thank you for choosing the Selfieshow C13/C13d Multifunctional Stable Tripod Selfie Stick. This device is designed to enhance your photography and videography experience with its versatile features, including an extendable rod, stable tripod, detachable phone mount, Bluetooth remote control, and optional fill lights. Please read this manual carefully to ensure proper usage and to get the most out of your product.

Product Specifications

CategoryParameterValue
AppearanceProduct Size63x46x227~1325mm
ColorBlack
Packing Size229 x 63 x 46 mm
Equipment WeightNet 265g, Gross 295g
Selfie HardwareBluetooth VersionBluetooth 5.0
Transmission Frequency2.4GHz-2.4835GHz
Working Voltage3V
Bluetooth Distance10M
BatteryCR2032 (replaceable)
System CompatibilityAndroid 4.4 or above, iOS 5.1 or above
General HardwareMaterialsABS + Stainless Steel
Phone Size Compatibility65-95mm
Max Tripod Height1325mm

Package Contents

  • Selfieshow C13/C13d Selfie Stick Tripod
  • Bluetooth Remote Control (embedded)
  • Instruction Manual (this document)
  • Detachable Fill Light (C13d model only)

Setup Guide

  1. Unfold the Tripod: Gently pull the bottom handle outwards to extend the tripod legs. Ensure the legs are fully spread for maximum stability. The tripod features anti-slip foot pads for secure placement.
    Tripod base with anti-slip silicone detail

    Image: Tripod base with anti-slip silicone for stability.

  2. Extend the Rod: Pull the telescopic rod upwards from the handle. The rod is made of high-quality stainless steel and extends up to 1.3 meters with 9 adjustable sections.
    Extended stainless steel rod with 9 sections

    Image: Close-up of the 9-section stainless steel telescopic rod.

  3. Attach Your Phone: Open the phone clamp and securely place your smartphone (65-95mm width) into the holder. The phone mount is detachable and can be used independently as a phone stand.
    Detachable phone mount design

    Image: Illustration of the detachable phone mount.

  4. Pair Bluetooth Remote: The remote control is embedded in the handle. Remove it. Turn on your phone's Bluetooth and search for 'Selfieshow' or a similar device name. Pair the remote. The remote has a 10M Bluetooth distance.
    Bluetooth remote control in hand

    Image: Hand holding the Bluetooth remote control.

  5. (Optional) Attach Fill Light: If your model includes detachable fill lights, slide them onto the designated slots on the phone mount. These lights offer 3 lighting modes (Cold, Natural, Warm) and 6 brightness levels.
    Detachable fill light with 3 lighting modes and 6 brightness levels

    Image: Detachable fill light with various lighting modes.

  6. (Optional) Attach External Camera: The selfie stick features a 1/4" standard screw mount, allowing you to attach other compatible devices like sports cameras or digital cameras directly to the top.
    1/4 inch standard screw compatibility for cameras and fill lights

    Image: 1/4" standard screw mount for external devices.

Operating Instructions

1. Handheld Selfie Mode

  • Ensure the tripod legs are folded into the handle.
  • Extend the rod to your desired length.
  • Hold the handle firmly and use the Bluetooth remote to capture photos or start/stop video recording.

2. Tripod Remote Shooting Mode

  • Unfold the tripod legs and place the device on a stable, flat surface.
  • Extend the rod to the desired height.
  • Position your phone or camera as needed.
  • Use the detachable Bluetooth remote to take photos or videos from a distance.

3. Phone Holder Mode

  • Detach the phone mount from the selfie stick.
  • The phone mount itself has a small kickstand, allowing it to function as a desktop phone holder for calls, messages, or watching videos.
    Detachable phone clip usage for phone calls, messaging, and video watching

    Image: Phone clip holder used for various phone activities.

4. 360° Rotation Adjustment

  • The phone mount allows for 360° rotation. Adjust the angle to switch between horizontal, vertical, or overhead shots without needing to reposition your phone.
    360 degree rotation for horizontal, vertical, and overhead shots

    Image: Demonstrating 360° rotation for different shooting angles.

5. Fill Light Operation (C13d only)

  • Press the power button on the fill light to turn it on/off.
  • Short press the button to cycle through the 3 lighting modes (Cold Light, Natural Light, Warm Light).
  • Long press the button to adjust the brightness levels within each mode (6 levels).
    Detachable fill light illuminating a person's face

    Image: Detachable fill light in use to brighten skin.

Product Video Demonstration

Video: A demonstration of the Selfieshow C13/C13d selfie stick tripod's features and various use cases, including detaching the phone clip, extending the handle, setting up the stable tripod, and using the detachable lamp.

Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: When not in use, fold the tripod legs and retract the rod to its shortest length (227mm) for compact storage. Store in a cool, dry place away from direct sunlight.
    Selfie stick folded for portability

    Image: Selfie stick in its compact, portable form.

  • Battery Replacement: The Bluetooth remote control uses a CR2032 battery. If the remote stops responding, replace the battery by carefully opening the remote's casing.

Troubleshooting

  • Remote Control Not Connecting:
    • Ensure the remote control is charged or has a fresh CR2032 battery.
    • Make sure Bluetooth is enabled on your smartphone.
    • Unpair and re-pair the remote control in your phone's Bluetooth settings.
    • Ensure the remote is within the 10M operating range.
  • Tripod Instability:
    • Ensure the tripod legs are fully extended and locked into place.
    • Place the tripod on a flat, stable surface.
    • Avoid extending the rod to its maximum height in windy conditions or on uneven ground.
  • Phone Not Fitting in Clamp:
    • Verify your phone's width is between 65mm and 95mm.
    • Remove any bulky phone cases that might prevent a secure fit.

User Tips

  • For group photos, utilize the tripod mode and Bluetooth remote to include everyone in the shot without needing a timer.
  • When using the fill lights, experiment with different light modes and brightness levels to find the best illumination for your environment and skin tone.
  • The detachable phone mount is very convenient for video calls or watching content hands-free on a desk.

Warranty and Support

This Selfieshow product is designed for durability and performance. For any issues or questions not covered in this manual, please contact the seller or refer to the official Selfieshow support channels. Keep your purchase receipt for warranty claims.