MARPOU Smart Ceiling Light 32W 45W 47W

Contents

MARPOU Smart Ceiling Light Instruction Manual

Model: Smart Ceiling Light 32W, 45W, 47W

Brand: MARPOU

1. Introduction

Thank you for choosing the MARPOU Smart Ceiling Light. This product combines advanced lighting technology with smart control features, including RGB color changing, dimming, and in some models, an integrated music speaker. This manual provides essential information for safe installation, operation, and maintenance of your new smart ceiling light.

2. Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other personal injury.

  • Electrical Safety: Always turn off the power at the main circuit breaker before installing, cleaning, or performing any maintenance on the light fixture.
  • Voltage: This product is designed for AC220-240V power supply. Ensure your household voltage matches this requirement.
  • Installation Environment: This fixture has an IP20 rating, meaning it is suitable for indoor use only. It is not protected against water spray and should not be used in wet environments such as bathrooms or showers.
  • Wiring: Ensure all electrical connections are secure and properly insulated. Do not cut wires unless specified.
  • Grounding: The fixture must be properly grounded to prevent electric shock.
  • Children: Keep the product and its components out of reach of children.
Installation safety icons: IP20 for indoor use, no shower use, 6mm wire stripping, no cutting wires, grounding symbol.

Image: Safety symbols for installation, including IP20 rating, warning against use in showers, wire preparation, and grounding.

3. Package Contents

Verify that all components are present and undamaged upon unpacking:

  • Ceiling light (1 unit)
  • Remote control (1 unit)
  • Mounting accessories (screws, anchors, etc.)

4. Specifications

FeatureDescription
Product NameModern Smart Ceiling Light
BrandMARPOU
Models32W (Diameter 30cm), 45W (Diameter 37cm), 47W (Diameter 46cm)
VoltageAC220-240V
Luminous Flux2000-82000 lm (depending on model and setting)
Color TemperatureRGBCW (RGB + 2700K~6500K)
RGB Mode16 million colors, 20 dynamic modes
DimmingYes (Stepless, 20%-100% brightness)
Control TypeTUYA APP + Remote Control
Mobile APP SupportAndroid 4.4 / iOS 9.0 and above
MaterialPP/Plastic (Lampshade and Body)
Installation MethodSurface mounted, self-contained
Speaker Power (Style A)3W
Lighting Area15-30 square meters
CertificationCE, LVD
Warranty1 Year

Kind reminder: Power fluctuation of ±10% is within a reasonable range.

Product dimensions and specifications table for RGB Bluetooth audio ceiling light.

Image: Product dimensions (46cm diameter, 6cm height) and detailed specifications table.

5. Setup and Installation

Follow these steps carefully to install your MARPOU Smart Ceiling Light:

  1. Turn Off Power: Before starting any electrical work, ensure the power supply to the installation area is completely turned off at the main circuit breaker.
  2. Mount the Base: Securely attach the light fixture's mounting base to the ceiling using the provided accessories.
  3. Connect Wiring: Connect the household electrical wires to the corresponding terminals on the light fixture. Ensure proper polarity (Live, Neutral, Ground) and secure all connections. The recommended wire stripping length is 6mm.
  4. Attach Lampshade: Once wiring is complete and secure, carefully attach the lampshade to the mounted base by rotating it until it locks into place.
  5. Restore Power: Turn the power back on at the main circuit breaker.
Installation steps diagram showing turning off power, mounting, wiring, and attaching lampshade.

Image: Visual guide for the installation process.

6. Operating Instructions

6.1 Remote Control

The included remote control allows for easy adjustment of your ceiling light's settings:

Diagram of the remote control with numbered buttons and corresponding functions.

Image: Remote control layout and button descriptions.

  1. Main Switch: Press to turn the light ON/OFF. Press and hold for 10 seconds to exit the APP device pairing mode and reconfigure the device.
  2. Color Temperature Polling: Cycles through different color temperatures.
  3. 30-Minute Timer: Sets a timer for 30 minutes, after which the lights will turn off.
  4. Brightness Plus: Increases brightness.
  5. Yellow Light Plus: Increases the yellow component of the light.
  6. Night Light: Activates a soft night light mode.
  7. Color Temperature Plus: Adjusts color temperature towards cooler white.
  8. Reduce Brightness: Decreases brightness.
  9. Seven-Color Static Polling: Cycles through seven static colors.
  10. Seven-Color Gradient Jump Polling: Cycles through seven colors with a gradient jump effect.
  11. Magic Polling: Activates a dynamic, multi-color effect.
  12. Turn to Warm Light: Switches the light to a warm white color temperature.
  13. Switch to White Light: Switches the light to a neutral white color temperature.
  14. Neutral Light (All Bright): Activates a bright, neutral white light.

6.2 APP Control (TUYA Smart)

For advanced control and smart features, download the "Tuya Smart" app on your smartphone.

APP Remote Control features including 16 Million RGB, 2700K-6500K, and Night Light.

Image: Overview of APP control capabilities.

  1. Download APP: Search for "Tuya Smart" on Google Play Store (for Android 4.4+) or Apple App Store (for iOS 9.0+).
  2. Add Device: Open the app, register/log in, and click the "+" icon, then select "Add Device".
  3. Enter Pairing Mode: Switch the ceiling light ON and OFF three times, with 2-4 seconds between each switch. The light will begin to flash rapidly, indicating it's in pairing mode.
  4. Connect to Wi-Fi: In the app, confirm the light is flashing, then click "Add" and enter your 2.4GHz Wi-Fi network password. (Note: 5GHz Wi-Fi is not supported).
  5. Wait for Connection: The app will search for and connect to the device. This may take 5-30 seconds.
  6. Successful Connection: Once connected, you can rename the device and control it via the app.
Tuya Smart App installation steps with screenshots.

Image: Detailed steps for connecting the light to the Tuya Smart app.

6.3 Bluetooth Audio (Style A only)

For models with an integrated music speaker (Style A), follow these steps to connect via Bluetooth:

  1. Enable Bluetooth: On your smartphone, go to system settings and turn on Bluetooth.
  2. Search and Pair: Search for available devices and select "RGB light".
  3. Confirmation: After successful connection, you will hear a "ding dong" prompt from the ceiling light.
  4. Automatic Reconnection: The "RGB-light" will automatically connect to your phone when Bluetooth is enabled on subsequent uses.
Style A ceiling light with integrated music speaker and phone app control.

Image: Style A, highlighting the integrated audio system.

6.4 Lighting Modes and Features

  • Color Temperature Adjustment: Easily switch between Cold White (6500K), Natural Light (4500K), and Warm White (3500K) to suit your mood or activity.
  • Stepless Dimming: Adjust brightness from 20% to 100% for optimal illumination.
  • RGB Color Options: Access 16 million colors and 20 dynamic modes via the app or remote control to create various atmospheres.
  • Night Light Mode: A dedicated setting for soft, low-level lighting.
  • Timer Switch: Schedule the light to turn ON/OFF at specific times, such as turning off at 22:00 and on at 06:00.
Color temperature options: 6500K Cold White, 4500K Natural Light, 3500K Warm White.

Image: Visual representation of different color temperatures.

Stepless dimming feature showing warm white, natural light, and cold white, with brightness adjustment.

Image: Stepless dimming and brightness control.

Timer switch function with examples of scheduled on/off times.

Image: Timer switch functionality for automated lighting.

Video: Product demonstration showcasing color changes, dimming, and app control.

7. Maintenance

To ensure the longevity and optimal performance of your MARPOU Smart Ceiling Light, follow these maintenance guidelines:

  • Cleaning: The plastic lampshade is designed for high light transmittance and is easy to clean. Wipe the surface gently with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
  • Regular Checks: Periodically check for any loose connections or signs of wear. If any issues are found, turn off the power immediately and consult a qualified electrician.
Close-up of the plastic lampshade, highlighting its high light transmittance and easy-to-clean properties.

Image: Detail of the plastic lampshade material.

8. Troubleshooting

If you encounter issues with your smart ceiling light, refer to the following troubleshooting tips:

  • Light Not Turning On:
    • Check if the power is supplied to the fixture at the main circuit breaker.
    • Ensure all wiring connections are secure.
    • Verify the remote control battery is not depleted.
  • APP Connection Issues:
    • Confirm your Wi-Fi network is 2.4GHz (5GHz is not supported).
    • Ensure the light is flashing rapidly when attempting to pair. If not, re-enter pairing mode by switching the light ON/OFF three times.
    • Double-check the Wi-Fi password entered in the app.
    • If issues persist, try resetting the light by pressing the main switch button on the remote for 10 seconds, then attempt APP pairing again.
  • Bluetooth Audio Not Connecting (Style A):
    • Ensure Bluetooth is enabled on your smartphone.
    • Verify that you are searching for and pairing with "RGB light" in your phone's Bluetooth settings.
    • If previously paired, ensure the light is not connected to another device.
  • Remote Control Not Responding:
    • Check and replace the remote control battery if necessary.
    • Ensure there are no obstructions between the remote and the light fixture.

9. User Tips

  • Optimal Lighting: Experiment with the 16 million colors and 20 dynamic modes to create the perfect ambiance for any occasion, from a vibrant party to a relaxing evening.
  • Smart Home Integration: Leverage the Tuya Smart app to integrate your ceiling light with other smart home devices and create automated routines.
  • Energy Saving: Utilize the timer function to automatically turn off lights when not needed, contributing to energy savings.
  • Brightness for Tasks: For detailed tasks like reading or studying, use the cooler white light settings (e.g., 6500K Cold White) and adjust brightness to a higher level for optimal visibility.
  • Consider Luminous Flux: When choosing a model, note that the 46cm (47W) model offers a luminous flux range of 2000-82000 lm, providing ample brightness for larger rooms.

10. Warranty and Support

Your MARPOU Smart Ceiling Light comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.

For detailed warranty terms, troubleshooting, or further assistance, please refer to the complete user manual available in PDF format: User Manual (PDF).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.