RETEKESS TD113-T117

Contents

RETEKESS TD113 Watch Pager and T117 Call Button System User Manual

Model: TD113-T117 | Brand: RETEKESS

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your RETEKESS TD113 Watch Pager and T117 Call Button System. This system is designed to enhance service efficiency in various environments such as cafes, bars, hookah lounges, and hotels.

2. Specifications

2.1 TD113 Watch Pager

FeatureDescription
Size37*64.5*16mm
MaterialABS+PC
ColorBlack
ModulationOOK/FSK Mode (optional)
Working Frequency433.92MHz
Interactive ModeCapacitive touch
Display1.69 inch 204*280 TFT color screen
Battery3.7V 450mAh Li-ion Battery
Water ResistanceIP67 rating
ButtonPower button
Receiving Sensitivity-120dbm
Transmit Power10dBm Max
Charging PortMagnetic charging
Charging Voltage5V/1A
Receiving Current16mA
Alarm Current60-120mA
Working Current15mA-60mA
Shutdown Current< 50uA
Communication Distance80m Max

2.2 T117 Call Button

FeatureDescription
Modulation ModeASK (AM)
RF Frequency433MHz
Working ChipLearning Code
Power Supply2pcs 3V CR2016 Button Cell (included)
Transmission DistanceUp To 80 Meters (in open area)
Working Temperature-20 ℃ to 55 ℃
Size64 x 61 x 15mm / 2.5 x 2.4 x 0.6 in
Weight27g / 1oz
Four KeysCall, Cancel, Pay, Order

3. Setup

3.1 Watch Host Overview

The TD113 watch pager features a power button, capacitive touch screen, strap mounting holes, a buzzer sound hole, and a magnetic charging port.

3.2 Initial Startup

Press and hold the power button for 3 seconds to turn on the watch. The screen will display the version model and machine ID before entering the main interface.

3.3 Charging the Watch

Attach the magnetic charging connector to the charging port on the back of the watch. Plug the other end into a power adapter to begin charging. The battery icon on the screen will turn green when charging.

Magnetic charging port on the watch
Wipe the watch's charging port before charging to prevent dirt from affecting efficiency and extend its lifespan.

3.4 Wearing Options

The watch strap is detachable, allowing for versatile wearing options. You can wear it as a wristband or use a back clip for chest hanging. A lanyard can be passed through the lanyard hole for wearing around the neck.

Two wearing options for the watch pager: wristband and clipped to attire
The watch can be worn clipped to your attire or hung around your neck, catering to your personal preference.

3.5 Registering Call Buttons (Pairing)

To register a T117 call button with the TD113 watch pager:

  1. On the watch's main menu, navigate to the 'Register' function.
  2. Select 'Pager' from the registration selection interface.
  3. The watch will display an ID number (e.g., ID: 0001).
  4. Press the 'Register' button on the watch to enter registration waiting mode.
  5. Press the T117 call button you wish to register. The watch will confirm successful registration, and the ID value will automatically increase.
  6. If the pager has already been registered, the watch will indicate 'Repeated registration'.
Easy Connection - Registering a call button with the watch pager
Easy Connection: Operate easily to connect the call button. The watch shows registration options and ID input.
Video demonstrating the pairing process between the TD113 watch pager and a T117 call button, showing menu navigation and button presses for registration.

3.6 Registering an Evaluator (if applicable)

The registration method for an evaluator is the same as for a pager. Ensure evaluators are registered according to their specific function.

3.7 Registering a Keyboard (if applicable)

If using a keyboard transmitter (e.g., TD154, TD177), select 'Keyboard' in the registration interface. Enter the keyboard name (1-6 characters) and wait for the watch to call its local ID number for successful registration.

4. Operation

4.1 Screen On/Off

When the screen is off, short press the power button to turn it on. The screen will automatically turn off after 15 seconds of inactivity. If the screen is on, you can manually press the power button or wait 15 seconds for it to turn off automatically.

4.2 Main Interface

The top status bar displays the date, wireless switch status, USB connection icon (if charging), and battery power. Long press the main menu switch button to enter the main menu interface. The menu switch button is displayed for 5 seconds by default.

4.3 Menu Navigation

From the main interface, use the '<' or '>' buttons to navigate through menu options. Click on an icon to enter its corresponding function. The 'Home page return' button ('^') returns to the main interface.

4.4 Time and Date Settings

Access 'Time' or 'Date' from the main menu. Use the on-screen controls to adjust hours, minutes, AM/PM, year, month, and day. The watch supports 12/24-hour mode modification.

4.5 Language Selection

In the menu, select the 'Language' icon. Choose from supported languages (Chinese, English, French, Italian, German, Spanish, Russian, Portuguese, Japanese) by sliding up/down and clicking to select.

4.6 Sending Text Messages

This function is available when the watch is in 'PACK' wireless mode. Select the 'Message' icon from the menu. Enter the recipient's ID number using the on-screen keypad, then select a pre-defined message to send. The background color of the selected message will turn blue.

4.7 Watch Dial Selection

Select the 'Theme' icon from the menu to browse and select different watch face styles. Click on a dial to set it as the standby display. The selected dial will be highlighted in blue.

Watch display showing various theme options for watch faces
Visual Delight: The availability of diverse watch face styles offers a personalized and enjoyable visual experience.

4.8 Brightness Adjustment

Select the 'Brightness' icon from the menu. Use the slider to adjust the screen brightness from 0 to 100. Click 'Return' to save the setting.

4.9 Settings Menu

Access the 'Settings' icon from the menu to configure various parameters:

  • Wireless Mode: Set the frequency modulation mode (FSK, OOK, PACK). For PACK mode, ensure the communication channel (0-255) is consistent with the communicating party.
  • Working Mode: Configure how the watch receives calls (Single Key, Multi-Key, Keyboard, Blacklist). Blacklisting is not recommended as it displays internal identity code for unregistered callers.
  • Key Value Settings: Set the service type for call buttons and modify service types. This function is available in FSK or OOK mode.
  • Call Filtering Time: Set the time interval (2-10 seconds) for valid calls from the same pager/button to prevent repeated calls within a short period.
  • List Display: Choose between 'Active View' (latest call at top) or 'Queue View' (latest call at bottom) for call information sorting.
  • Timeout Settings: Define call information retention time and background colors for normal, timeout, and severe timeout states. Colors supported: white, red, orange, yellow, green, blue, purple.
  • Automatic Removal Time: Set a time (0-30 minutes) after which call information is automatically removed from the list. Set to 0 to disable.
  • Date Display Format: Choose from 5 formats (MM/DD/YYYY, DD/MM/YYYY, MM.DD,YYYY, DD.MM,YYYY, YYYY/MM/DD).
  • Local ID: Set the watch's local ID and name. This is used for keyboard communication in PACK mode and FSK/OOK wireless mode.

4.10 Reminder Settings

Access the 'Reminder' icon from the menu to configure sound, vibration, reminder duration (0-30 seconds), and sound type. Multiple reminder methods, any combination of vibration and ringtone, are available.

Watch display showing various reminder modes: buzzer, vibration, or both
Various Reminder Modes: Customizable to suit your needs, including buzzer, vibration, or both.

4.11 Scheduled Tasks

Select the 'Timer' icon from the menu to create, modify, or delete scheduled tasks. Tasks can include alarms, power off, wireless off, or wireless on. You can set the time and specific days for tasks to execute.

4.12 Calculator

Access the 'Calculator' icon from the menu to perform basic calculations. Use the 'C' key to clear data and the '=' button to calculate results.

4.13 Wireless Switch

Select the 'Wireless Switch' icon from the menu to toggle the wireless receiving function on or off.

4.14 Alarm Response

When an alarm is triggered, the watch displays an alarm interface. If sound and vibration levels are not zero, the device will vibrate and beep. The alarm will sound for 1 minute if not manually exited.

4.15 Pager Call Display

When the watch receives a call, the call list interface shows the pager's ID, number of calls, service type, and call time. The background color of the call log is configurable.

4.16 Call Priority Response

If the watch receives a call message and you click 'Delete' in the call list, it sends a cancel signal, removing the call record from other watches simultaneously (in FSK/OOK multi-key mode).

4.17 Wireless Information Receiving Display

In PACK mode, information sent by other watches is displayed, showing the sender's ID and time received. Up to 7 messages can be displayed. Click 'Delete' to remove information.

4.18 Call Record View

From the standby interface, click the top status bar to view the latest 10 call records received in OOK/FSK mode. Records show Call ID, Call Type, Number of calls, Call time, and Response time.

4.19 Shutdown and Factory Reset

  • Shutdown: Navigate to the 'Shutdown' icon in the menu. Slide right to power off.
  • Force Shutdown: If the screen is on, press and hold the power button for 6 seconds to force shutdown.
  • Restore Factory Settings: Navigate to the 'Factory Reset' icon in the menu. Confirm the action to clear all data and restore default settings. The watch will shut down and needs to be turned on manually.

5. Maintenance

5.1 Charging Best Practices

Always wipe the watch's charging port before charging to prevent dirt from affecting efficiency and extending its lifespan. Use the provided magnetic charging cable and a 5V/1A power adapter. Avoid high-power chargers.

5.2 Battery Care

Charge batteries within a 10°C to 40°C environment. Do not charge below 0°C. Rechargeable batteries should be charged with the dedicated charger provided. Keep new, old, or used batteries out of reach of children.

5.3 Water Exposure

If the watch or battery is submerged in water, dry and clean it before use. Do not use heat sources like hair dryers. If submerged in corrosive substances (e.g., saltwater), rinse with fresh water and then dry.

6. Troubleshooting

For general issues, ensure the device is charged and properly paired. If experiencing interference, refer to the RF Safety and Electromagnetic Interference sections below.

6.1 Common Questions & Answers

  • Q: How far is the transmission distance?
    A: The indoor distance can reach 60-80m, and the outdoor distance can reach 100-150m.
  • Q: Is the watch waterproof?
    A: The watch supports IP67 level 100% waterproof rating and is suitable for use in humid environments.
  • Q: Can the watch have more call buttons as needed?
    A: The number can be increased according to demand, up to 300 call buttons (Buttons only support Retekess brand).
  • Q: How long can the watch last?
    A: The watch receiver has a battery life of 48 hours in operation and 72 hours in standby mode.
  • Q: Is the watch easy and convenient to operate overall?
    A: The operation is very simple and easy to use.
  • Q: How many reminder modes does the watch have?
    A: Multiple reminder methods, any combination of vibration and ringtone.

7. User Tips

  • To maximize battery life, consider using vibration-only reminder modes when possible.
  • Regularly check the call log to monitor service efficiency and identify peak times.
  • For optimal signal, ensure call buttons are placed within the recommended transmission distance from the watch pager.
  • Keep the watch's software updated for best performance, if updates are available.

8. Safety Information

8.1 RF Energy Exposure and Product Safety Guide

Before using this device, please read this guide which contains important operating instructions for safe usage, control information, and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. User instructions should accompany the device when transferred to other users.

8.2 US FCC Requirements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

8.3 Canadian IC Requirements

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

8.4 European CE Requirements

HENAN ESHOW ELECTRONIC COMMERCE CO., LTD declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.

8.5 Disposal Environmental

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws and rules in your area.

8.6 RF Safety

Keeping the radio at a proper distance is important as RF exposure decreases with increasing distance from the proper antenna. Transmit no more than the rated duty factor 50% of the time. For users who wish to further reduce their exposure, effective measures include:

  • Reduce the amount of time spent using your wireless device.
  • Use a speakerphone, earpiece, headset, or other hands-free accessory to reduce proximity to the head.
  • Increase the distance between wireless devices and your body.

8.7 Electromagnetic Interference/Compatibility

Nearly every electronic device is susceptible to electromagnetic interference (EMI). During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so, such as hospitals or healthcare facilities.

8.8 For Handheld Transmitter Only (Medical Devices)

Persons with pacemakers, implantable cardioverter defibrillators (ICDs) or other active implantable medical devices should consult with their physicians regarding potential interference. Turn the radio OFF immediately if interference is suspected. Do not carry the radio in a chest pocket or near the implantation site; carry or use it on the opposite side of the body from the implantable device.

8.9 Protect Your Hearing

Hearing protection symbol
Hearing protection is important when using audio devices.

Accessories that can make sounds, such as pagers and headphones, require safety warnings to protect hearing.

  • Use the lowest volume necessary for your job. Turn up the volume only if you are in noisy surroundings.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Excessive sound pressure from earphones and headphones can cause hearing loss.
  • Exposure to loud noises for extended periods can temporarily or permanently affect hearing.

8.10 Battery Safety

WARNING: KEEP NEW OR OLD USED BATTERIES OUT OF REACH OF CHILDREN.

  • In the event of a battery leaking, do not allow the liquid to come into contact with skin or eyes. Wash affected areas with copious amounts of water and seek medical advice immediately.
  • If a radio or battery has been submerged in water, dry and clean it before use. Do not dry with heat sources. If submerged in corrosive substances, rinse with fresh water and dry.
  • Turn off your radio before charging.
  • Batteries shall be charged at 10°C~40°C. Charging below 0°C is prohibited.
  • Rechargeable batteries need to be charged with a dedicated charger provided for each piece of equipment before first use.
  • Rechargeable batteries are only to be charged by adults or by children at least 8 years old under adult supervision.

8.11 Children's Products

Not suitable for children under 3 years old symbol
WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years old.

9. Warranty and Support

9.1 Authorized Accessories List

For a list of Retekess-approved accessories for your radio model, visit the website http://www.retekess.com.

9.2 Contact Information

For assistance regarding repairs and service, please contact:

Germany Retevis Technology GmbH
Uetzenäcker 29, 38176 Wendeburg
Email: Retevis-Europa@outlook.com
Tel: +0049 053029369179

9.3 User Manual PDF

A detailed user manual in PDF format is available for download. You can access it here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.