1. Introduction
Thank you for choosing the iScooter EB3 Electric Bicycle. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read it thoroughly before your first ride and keep it for future reference.
The iScooter EB3 is a powerful 350W electric bicycle designed for adults, featuring a 36V 10.4Ah battery, a top speed of 32km/h, and a range of 70-100KM. Its 26-inch wheels and robust design make it suitable for various terrains, including off-road conditions.
Figure 1: iScooter EB3 Electric Bicycle highlighting Motor 350W, Max Speed 32km/h, Max Range 100KM, Max Load 150KG, Battery 36V 10.4Ah.
2. Safety Information
⚠ WARNING: Please read all safety warnings and instructions carefully before operating the electric bicycle. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Fire Risk: Be aware of potential fire risks, especially during charging and storage. Always follow the instruction manual for proper charging procedures and storage conditions.
- Protective Equipment: Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, while riding.
- Legal Compliance: Fully comply with all applicable local laws and regulations regarding electric bicycle use.
- Weight Limit: Do not exceed the maximum load capacity of 150KG.
- Environmental Conditions: The e-bike has an IPX4 waterproof level, meaning it is resistant to splashing water from any direction. Do not immerse the e-bike in water or ride in heavy rain.
- Temperature: Operate the e-bike within the recommended temperature range of -10°C to 40°C.
3. Product Overview & Features
The iScooter EB3 is engineered for comfort, durability, and performance. Key features include:
- Robust Design: Built to be big and strong, suitable for heavy and tall riders (up to 2 meters).
- Ergonomic Grip: Wide handlebars provide a comfortable cycling posture, reducing fatigue during long rides.
- Integrated Wiring: Signal lines, brake lines, and motor input lines are hidden and protected within the frame for enhanced durability and aesthetics.
- Folding Structure: Utilizes a high-precision forging process for a reliable folding mechanism, offering convenience for storage and transport.
- Advanced Lighting: Features a clear headlight for night riding with optimal intensity and bilateral taillights for enhanced rear visibility.
- Suspension System: Equipped with a front damping system and dual front and rear shock absorption for a smooth and comfortable ride on varied terrains.
- Brushless Motor: A powerful 350W brushless motor provides strong power support with 60Nm of torque.
Figure 2: Detail of the 350W brushless motor, showing Max Speed 32KM/H, Max Range 100KM, and 60Nm Torque.
Figure 3: The front damping system provides a comfortable riding experience.
Figure 4: The 26-inch wheels are adaptable to various terrains including Stone Road, City Road, Mountain Path, and Snow Road.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | EB3 |
| Brand Name | iScooter |
| Certification | CE |
| Rated Passenger Capacity | One Seat |
| Style | Standard Type |
| Max Speed | 32 km/h (after speed release) |
| Range per Power | 75-100 KM |
| Power Supply | Lithium Battery |
| Nominal Voltage | 36V |
| Origin | Mainland China |
| Motor Type | Brushless |
| Rated Motor Power | 350W |
| Folded | Yes |
| Wheel Size | 26 inch |
| Tire Type | Air tire |
| Bike Body Materials | Iron |
| Battery Capacity | 36V 10.4Ah (JETECH brand) |
| Max Load | 150KG |
| Net Weight (NW) | 24.8KG |
| Gross Weight (GM) | 30.6KG |
| Bike Size (Unfolded) | 1720*670*1040 mm |
| Folding Size | 1100*450*480 mm |
| Package Size | 1370*245*715 mm |
| Suitable Height | Up to 2 meters |
| Waterproof Level | IPX4 |
| Operating Temperature | -10°C to 40°C |
| Applicable Terrain | Hardened pavement, flat dirt pavement, slope below 45 degrees, steps no higher than 10cm, channels no more than 8cm |
| Motor Rated Current | 10A |
| Motor No-load Current | 0.3A |
| Motor No-load Speed | 660/min |
| Front Wheel Motor Dimensions | 26 inch precursor |
| Input Charging Voltage | 42V |
| Smart BMS | Over charge, over flow, over discharge, short circuit protection |
| Battery Charge Cycles | ≥1500 |
| Charger Rated Power | 84W |
| Charger Rated Input Voltage | 100-240V |
| Charger Rated Current | 3A |
| Charging Time | 3-5 hours |
| Charger Rated Output Voltage | 42V |
5. Assembly & Initial Setup
Your iScooter EB3 Electric Bicycle may require some minor assembly upon arrival. Please follow these general steps:
- Unboxing: Carefully remove all components from the packaging.
- Unfolding (if applicable): If the bike is in a folded state, carefully unfold the frame until it locks securely into place. Ensure all quick-release levers are tightened.
- Handlebar Installation/Adjustment: Attach the handlebars to the stem if not already installed. Adjust the handlebar height and angle for a comfortable riding position, then tighten all bolts securely.
- Seat Post Installation/Adjustment: Insert the seat post into the frame and adjust the seat height to allow for a slight bend in your knee when the pedal is at its lowest point. Secure the quick-release lever.
- Pedal Attachment: Identify the left (L) and right (R) pedals. Thread the pedals into the crank arms (left pedal is reverse-threaded). Tighten them firmly with a wrench.
- Tire Inflation: Check the tire pressure and inflate to the recommended PSI (usually found on the tire sidewall).
- Brake Check: Ensure both front and rear brakes are functioning correctly and that the levers are easily accessible.
- Initial Battery Charge: Before your first ride, fully charge the battery as described in the 'Charging the Battery' section.
Figure 5: Handlebar and front wheel assembly.
6. Operation
6.1 Powering On/Off
Locate the power button on the Smart LCD Display. Press and hold to turn the e-bike system on or off.
6.2 Smart LCD Display
The full-function dashboard provides real-time riding information. It typically displays:
- Current Speed (AVG, MAX)
- Distance Traveled (DST, ODO)
- Battery Level (BMS)
- Assist Level (ASSIST)
- Voltage (VOL)
- Trip Time (TIME)
Refer to the display's specific instructions for navigating menus and changing settings.
Figure 6: Full-function dashboard for smarter riding, including Smart LCD Display and 7-speed Lever & Thumb Throttle.
6.3 Riding Modes & Controls
- Pedal Assist System (PAS): The motor provides assistance as you pedal. You can typically adjust the level of assistance via the LCD display.
- Thumb Throttle: Use the thumb throttle for instant acceleration without pedaling. Be mindful of local regulations regarding throttle use.
- 7-Speed Lever: Shift gears using the 7-speed lever to adapt to different terrains and optimize pedaling efficiency.
6.4 Lighting
The e-bike is equipped with a front headlight and bilateral taillights. Activate them for improved visibility, especially during low-light conditions or at night.
Figure 7: Front headlight for clear visibility at night.
Figure 8: Rear view showing the taillight for safety.
7. Charging the Battery
The iScooter EB3 is powered by a 36V 10.4Ah Lithium Battery. Follow these steps for safe and effective charging:
- Connect Charger: Plug the charger into a standard wall outlet (100-240V AC).
- Connect to Battery: Connect the charger's output plug to the charging port on the e-bike's battery.
- Charging Indicator: The charger will typically have an indicator light (e.g., red for charging, green for fully charged).
- Charging Time: A full charge usually takes 3-5 hours.
- Disconnect: Once fully charged, disconnect the charger from the battery first, then from the wall outlet.
Important Battery Information:
- Charger Specifications: Use only the provided 42V 3A charger.
- Smart BMS: The battery is equipped with a Smart Battery Management System (BMS) for protection against overcharge, over-discharge, over-current, and short circuits.
- Charge Cycles: The battery is designed for ≥1500 charge cycles.
- Storage: If storing the e-bike for an extended period, ensure the battery is charged to approximately 50-70% and store it in a cool, dry place. Avoid storing a fully depleted or fully charged battery for long durations.
Figure 9: Charging diagram indicating 42V 3A charge and 3-4 hours for a single charge.
Figure 10: The removable battery pack, offering an extra long range of 75-100 KM.
8. Maintenance
Regular maintenance ensures the longevity and safe operation of your iScooter EB3.
- Tires: Regularly check tire pressure and for any signs of wear or damage. Maintain recommended PSI.
- Brakes: Inspect brake pads and cables regularly. Ensure brakes are responsive and adjust if necessary. Replace worn brake pads promptly.
- Chain: Keep the chain clean and lubricated to ensure smooth gear changes and prevent rust.
- Fasteners: Periodically check all bolts, nuts, and quick-release levers to ensure they are securely tightened.
- Cleaning: Clean the e-bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components. Do not use harsh chemicals.
- Battery Care: Follow charging and storage guidelines. Avoid fully discharging the battery frequently.
- Professional Service: For complex repairs or electrical issues, consult a qualified bicycle mechanic or the manufacturer's support.
9. Troubleshooting
If you encounter issues with your iScooter EB3, refer to the following common troubleshooting tips:
- No Power:
- Check if the battery is properly seated and locked.
- Ensure the battery is charged.
- Verify all cable connections are secure.
- Motor Not Assisting:
- Check the battery level on the display.
- Ensure the pedal assist level is not set to zero.
- Verify that the brake levers are not partially engaged (some e-bikes have motor cut-off sensors on brakes).
- Brakes Not Effective:
- Inspect brake pads for wear and replace if necessary.
- Check brake cable tension and adjust.
- Ensure brake calipers are properly aligned.
- Unusual Noises:
- Inspect the chain for proper lubrication and tension.
- Check for loose components or rubbing parts.
- If the noise persists or is from the motor, contact support.
For persistent or complex issues, please contact customer support.
10. User Tips
- Pre-Ride Check: Always perform a quick check of brakes, tires, and battery level before each ride.
- Adjust for Comfort: Take time to adjust the seat and handlebar height to your preference for maximum comfort and control.
- Vary Assist Levels: Experiment with different pedal assist levels to find the balance between effort and battery range that suits your ride.
- Gear Shifting: Use the gears effectively, especially on inclines, to reduce strain on the motor and battery.
- Terrain Awareness: While adaptable to various terrains, always ride cautiously and be aware of your surroundings, especially on uneven or slippery surfaces.
11. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.