ESTG ET381

Contents

Smart Watch ET381 User Manual

Model: ET381 | Brand: ESTG

Introduction

Thank you for choosing the ESTG Smart Watch ET381. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new smartwatch. The ET381 is designed to enhance your daily life with its advanced health monitoring features, activity tracking, and smart notifications, all presented on a vibrant AMOLED display.

Front view of the Smart Watch ET381 with a black metal band, displaying heart rate data.
Figure 1: ESTG Smart Watch ET381 with metal band, displaying health metrics.

Setup

1. Charging the Smart Watch

Before first use, fully charge your Smart Watch ET381. Connect the magnetic charging cable to the charging contacts on the back of the watch and plug the USB end into a compatible power adapter (not included) or a computer's USB port. The watch has a battery capacity of 300-450mAh, providing approximately 2 days of battery life on a full charge.

Rear view of the Smart Watch ET381, showing sensors and charging contacts.
Figure 2: Rear view of the watch showing sensors and charging contacts.

2. App Installation and Pairing

  1. Download the App: The Smart Watch ET381 requires a companion application to unlock its full potential. Search for the official app (name not specified, refer to packaging or quick start guide) on your smartphone's app store (compatible with iOS and Android OS).
  2. Enable Bluetooth: Ensure Bluetooth 5.0 is enabled on your smartphone.
  3. Pairing: Open the app, create an account if prompted, and follow the on-screen instructions to search for and pair with your ET381 smartwatch. The watch will typically display a pairing code or confirmation request.

3. Wearing the Watch

Wear the watch snugly on your wrist, about one finger's width above your wrist bone. Ensure the sensors on the back of the watch are in good contact with your skin for accurate health monitoring. The band is detachable, allowing for customization with other 22mm bands.

Operating Instructions

Basic Navigation

The ET381 features a full touch screen for intuitive navigation. Swipe left, right, up, or down to access different functions and menus. A physical button (mechanism) is also present, typically used for waking the screen, returning to the home screen, or accessing specific functions depending on context.

Key Functions

  • Health Monitoring: The watch includes a Heart Rate Monitor, Sleep Monitor, and Blood Pressure Monitor. Access these features through the dedicated app or by navigating to the respective screens on the watch.
  • Activity Tracking: Track your daily activity with the Steps Tracker, Calorie Tracker, and general Activity Tracker. View your progress directly on the watch or in the companion app.
  • Communication: Answer Calls and Dial Calls directly from your wrist when connected to your smartphone. Receive Push Messages, Message Reminders, and Call Reminders.
  • Smart Features: Utilize functions like Passometer, sleep tracker, week display, Remote Control (for camera or music, check app for details), and Alarm Clock.
  • Multiple Dials: Customize your watch face with various pre-installed or downloadable dials to match your style.

Maintenance

Cleaning

Regularly clean your watch and band to prevent skin irritation and maintain optimal sensor performance. Use a soft, damp cloth to wipe the watch body and band. Avoid using harsh chemicals or abrasive materials.

Water Resistance

The ET381 is rated as 'Life Waterproof'. This means it is resistant to splashes, rain, and brief immersion in water (e.g., washing hands). It is NOT suitable for swimming, showering, or diving. Exposure to hot water or steam should be avoided as it can damage the seals.

Battery Care

To prolong battery life, avoid fully discharging the watch frequently. Charge it when the battery level is low. Store the watch in a cool, dry place when not in use for extended periods, and ensure it has some charge to prevent deep discharge.

Troubleshooting

  • Watch not turning on: Ensure the watch is fully charged. If it still doesn't turn on, try a hard reset (refer to the app or quick start guide for specific instructions).
  • Cannot pair with phone: Make sure Bluetooth is enabled on your phone and the watch. Ensure the watch is within range and not paired with another device. Restart both the watch and phone, then try pairing again.
  • Inaccurate health readings: Ensure the watch is worn snugly on your wrist and the sensors are clean and in direct contact with your skin. Avoid excessive movement during measurements.
  • Notifications not appearing: Check app permissions on your phone to ensure the companion app has access to notifications. Verify that notifications are enabled within the watch's app settings.
  • Short battery life: Reduce screen brightness, disable unnecessary features (e.g., continuous heart rate monitoring if not needed), and ensure the watch's firmware is up to date.

Specifications

FeatureSpecification
Brand NameESTG
ModelET381
Display Size1.43 inch
Resolution466*466
Screen MaterialAMOLED
Touch ScreenYes
CPU ModelJL7012
CPU ManufacturerMediaTek
Movement TypeElectronic
Battery Capacity300-450mAh
Battery Life2 Days
Battery DetachableNo
RAM<128MB
ROM<128MB
Bluetooth Version5.0
GPSNo
WIFINo
Network ModeNone
Rear CameraNone
SIM Card AvailableNo
System CompatibilityiOS, Android OS
CompatibilityAll Compatible
LanguageEnglish
Waterproof GradeLife Waterproof
Case MaterialAlloy
Band MaterialSilica Gel
Band Length22mm
Band DetachableYes
Application Age GroupAdult
Screen ShapeRound
Multiple DialsYes
APP Download AvailableYes
CertificationCE
OriginMainland China
High-concerned chemicalNone

User Tips

  • Optimize Notifications: Customize which app notifications appear on your watch to avoid being overwhelmed and to conserve battery.
  • Explore Watch Faces: Take advantage of the multiple dial options to personalize your watch and match your style or current activity.
  • Regular Syncing: Ensure your watch is regularly synced with the companion app to keep your health and activity data up-to-date and backed up.
  • Firmware Updates: Check the companion app periodically for firmware updates. These updates often include performance improvements, bug fixes, and new features.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.