CAIXI Universal 1 Din Car Radio Multimedia Video Player

Contents

CAIXI 6.9-inch Universal 1 Din Car Radio Multimedia Video Player

Instruction Manual

Model: Universal 1 Din Car Radio Multimedia Video Player

1. Introduction

This manual provides comprehensive instructions for the CAIXI 6.9-inch Universal 1 Din Car Radio Multimedia Video Player. This device operates on a stable Windows CE system, ensuring smooth performance without common memory-related issues. It supports both wired and wireless CarPlay and Android Auto, enabling seamless integration with your smartphone for navigation, music, and communication. The unit also features FM stereo radio, MP5 video playback, and support for reversing cameras and steering wheel controls.

2. Setup

2.1. Package Contents

The standard package includes:

  • The main multimedia unit
  • Power cord
  • Remote control

Product information showing main unit, power cord, and remote control

2.2. Dimensions

The unit has the following approximate dimensions:

  • Width: 178mm
  • Height: 70mm
  • Depth: 51mm (main body), 78mm (including mounting frame)

Diagram showing the dimensions of the car multimedia player: 178mm width, 70mm height, 51mm depth, and 78mm mounting depth.

2.3. Rear Interface Description and Wiring

Refer to the diagram below for the rear interface connections. Ensure all connections are secure and correct to prevent malfunction or damage.

Rear interface wiring diagram for the car MP5 player, showing connections for power, speakers, radio antenna, USB, external microphone, video output, and camera input.

Key Connections:

  • Red (ACC): Connect to ignition switch +12V.
  • Yellow (BATTERY): Connect to power supply +12V (constant power for memory function).
  • Black (GND): Connect to ground wire B-.
  • Blue (ANT): Connect to radio antenna.
  • Green (ILLUMINATION): Connect to illumination circuit.
  • Brown (KEY): Connect to steering wheel control.
  • Pink (REVERSE): Connect to reversing camera power.
  • Orange (BRAKE): Connect to parking brake cable.
  • Speaker Wires: Ensure 8 speaker cables are connected. Each cable must not be grounded, shared, or touch other lines to prevent sound distortion or unit overheating.
  • Video Output 1 & 2 (V-OUT1, V-OUT2): For external video displays.
  • Left & Right Audio Output (L-OUT, R-OUT): For external amplifiers or subwoofers.
  • CVBS Input: Composite video input.
  • CAM IN: Reversing video input for camera.
  • MIC IN: External microphone input.
  • USB Port: For USB devices (some models).

Important: When the yellow B+ and red ACC lines receive 12V positive power simultaneously, the unit will power on normally. The yellow B+ line maintains power for the memory function.

2.4. Reversing Camera Installation Method

Follow the diagram for correct reversing camera installation. The camera automatically switches on when the car is in reverse gear.

Wiring diagram for reversing camera installation, showing connections to PND display, camera power source, and reversing lamp.

Wiring Steps:

  1. Locate the reverse control line (pink) on the unit's power line and connect it to the +12V positive pole. The screen will turn blue.
  2. Locate the CAM video input interface on the back of the unit, and find the positive and negative terminals of the backup light.
  3. The camera typically has two sockets: the red socket connects to the power cable, and the yellow socket inserts into the video cable.
  4. Connect the red wire of the camera's power cable and the video cable together to the positive pole of the reverse lamp. The black wire of the camera's power cable is not used.
  5. Connect the other end of the video cable to the CAM video input interface on the back of the unit. The red line extending from the video line connects to the reversing control line of the power line.

Note: If a reversing camera is not installed, do not connect the REVERSE/BACK cable to any location. Otherwise, the unit may automatically enter reverse mode, causing malfunction.

3. Operating Instructions

This unit supports both wired and wireless CarPlay and Android Auto. The interface allows access to phone apps, navigation, music, and voice assistants.

Image showing the car multimedia player with both CC6 wireless and CC3 wired CarPlay/Android Auto interfaces.

Wired Connection: Simply connect your smartphone using a USB data cable. The unit will automatically enter the CarPlay or Android Auto interface.

Wireless Connection:

  1. Enable Bluetooth and Wi-Fi on your mobile phone.
  2. Connect to the unit's Bluetooth.
  3. The unit will automatically enter the CarPlay or Android Auto interface.

Note: The signal is transmitted via Wi-Fi for wireless connections. CarPlay will disconnect if Wi-Fi is turned off. For Android Auto, Google Play services must be available locally.

Mirrorlink allows you to project your smartphone screen onto the car's display.

Image illustrating screen mirroring from a mobile phone to the car multimedia player.

  • iPhone Mirrorlink: Content is projected onto the car screen (display only). You cannot control your iPhone from the car screen.
  • Android Mirrorlink: After connecting via USB, you may be prompted to install an APP. Reconnect the data cable after installation to enter screen mirroring mode. You can operate from both the player screen and the phone screen.

Note: For Mirrorlink, only image transfer is successful initially. Audio transmission requires a Bluetooth connection.

3.3. Bluetooth Connection

To connect your mobile phone via Bluetooth:

  1. Turn on the unit and enable Bluetooth on your mobile phone.
  2. Search for the unit's Bluetooth name (e.g., "XXXX") on your phone.
  3. Select the unit and enter the pairing password (e.g., "XXXX") if prompted.
  4. Once connected, you can make/receive calls and play music through the unit.

3.4. FM Radio

The unit features an FM radio for current affairs news, traffic conditions, music, and entertainment.

Image of the car multimedia player displaying the FM radio interface with frequency 87.5-108.0MHz.

  • Frequency Range: 87.5 - 108.0 MHz

3.5. Voice Assistant Control

In CarPlay/Android Auto mode, the unit supports Siri/Google voice assistant, allowing for hands-free operation and an improved driving experience.

Diagram illustrating voice assistant control with options like 'Hey Siri', 'Hey Google', 'Dial Number', 'Open Map', 'Play Music', 'Help me open message'.

3.6. Steering Wheel Learning

You can program the unit to respond to your car's original steering wheel controls for easy music and function switching.

Image showing the car multimedia player interface for steering wheel learning, with a steering wheel in the background.

Programming Steps:

  1. Press and hold a button on your original car's steering wheel.
  2. Find the corresponding button icon on the unit's interface.
  3. Click the icon to change its color, indicating successful learning.

3.7. Remote Control Function

The unit comes with a remote control for convenient operation.

Diagram of the remote control with labeled buttons for various functions.

Button Functions:

  • MUTE: Mute On/Off
  • MODE: Switch mode
  • Power On/Off
  • VOL+/VOL-: Volume Up/Down
  • ENT (Enter): Play/Pause
  • ►► (Next Track): Next Track
  • ◄◄ (Previous Track): Previous Track
  • End Call/Answer Call
  • Number Buttons (0-9)
  • MENU: Access menu

Note: Before first use, remove the battery insulation paper from the bottom of the remote control. If the remote control does not work, check or replace the battery.

3.8. Built-in Smart Charging Chip

The unit features a built-in smart charging chip, offering extremely fast charging capabilities (up to 100W) for connected devices.

Diagram highlighting the built-in smart charging chip with features like extremely fast charging, intelligent control, and 100W fast charging.

4. Maintenance

To ensure optimal performance and longevity of your CAIXI multimedia player, keep the unit clean and free from dust. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods. Do not use harsh chemicals for cleaning; a soft, damp cloth is sufficient. Ensure all cables are properly secured and not under strain.

5. Troubleshooting

This section addresses common issues and provides solutions.

5.1. Unit Does Not Boot Normally

  1. Wiring Check: Ensure the yellow wire is connected to the positive pole (+12V constant), the red wire to the key control line (+12V switched), and the black wire to the negative ground. Incorrect or incomplete connections will prevent booting.
  2. Fuse Check: Verify if the fuse on the yellow line is intact. If broken, replace it. If the fuse repeatedly burns out, there might be a short circuit in the unit's protection circuit. Contact support.
  3. Test with 12V Battery: If wiring and fuse are correct, twist the yellow and red wires together, connect to a 12V positive, and the black wire to negative. Press the power button. If it boots, the car's wiring is faulty. If not, the unit may be defective.

5.2. Automatic Shut-down

  1. Cable Error: If the blue (automatic antenna power supply) cable is connected to the unit's power cable, automatic shutdown may occur. Correct the wiring.
  2. Unstable Voltage: Test the power supply with a stable 12V-5A source. If the unit still shuts down, the unit is faulty.

5.3. Noise Present

  1. Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Reduce volume or consider speaker replacement.
  2. Grounded Speaker Cable: Ensure speaker cables are not grounded. Connect the iron speaker cable directly to the unit's speaker cable.

5.4. Remote Control Not Working

  1. Battery Check: Remove the battery insulation paper. Test the remote by pointing it at a mobile phone camera and pressing a button; if the phone screen shows a light, the battery is working. If not, replace the battery.

5.5. Settings Not Saved (No Memory)

  1. Wiring Check: Ensure the yellow and red lines are connected correctly (yellow to positive, red to key control). If they are reversed, swap their positions.

5.6. Bluetooth Not Working

Ensure the unit's Bluetooth is turned on. Search for the unit's Bluetooth name on your phone and connect. If issues persist, try restoring factory settings.

5.7. Product Emits Smoke

Immediately replace the FUSE. If the problem persists, the internal circuit may be burned. Contact support for service.

5.8. Sound Cannot Be Adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. If the volume knob is broken, it may need replacement.

5.9. Reversing Camera Does Not Display

  1. Wiring Check: Verify correct and complete wiring for the reversing camera as per the installation method in Section 2.4.
  2. Camera Fault: If the camera's lamp does not light up when properly wired, the camera may be faulty and require replacement.

5.10. USB Devices Cannot Be Played

Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.

5.11. FM Radio Does Not Receive Stations

  1. Antenna Connection: Ensure the antenna plug is fully inserted. Check if the antenna or its line is disconnected.
  2. Station Search: Use the "AS" button for automatic search or manually search using the forward/backward buttons.
  3. Antenna Fault: If the above steps don't resolve the issue, unplug the antenna and try inserting a screwdriver or metal strip into the antenna port as a temporary antenna.

5.12. No Sound Immediately After Installation

If there is no sound immediately after installation, it is usually due to a wiring error or a short-circuited speaker wire. Check the speaker cables for short circuits and reconnect if necessary. Verify the number of speaker cables; if only 2 speaker cables are present but the original car requires more, re-route the car's speaker lines. One speaker requires two wires; two speakers require four wires.

5.13. No Sound After A While

Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple wires of the unit's tail line. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is faulty.

5.14. Restore to Factory Settings

If CarPlay, Android Auto, or Mirrorlink connections are abnormal, you can restore factory settings via "Basic Settings" > "Restore Factory" > "YES". If a reset button is available on the panel, pressing it will also restore factory settings.

6. Specifications

FeatureSpecification
Brand NameCAIXI
DinDouble Din
Display Size6.95"
Resolution1280*480
Operating SystemWindows CE
InterfaceISO
Voltage12 V (12~14.4V DC, Negative Ground)
Max Current Consumption15A
Max Output Power4X60W
Item Weight0.8kg
Item Size240mm x 93mm (approximate)
Special FeaturesCarPlay, Android Auto, Reversing Input, Smart Charging Chip, Voice Assistant Control, Steering Wheel Learning, FM Radio
Digital Media FormatCD (MP5 Player)
OSD LanguageChinese (Simplified), Chinese (Traditional), Polish, German, Russian, French, Korean, Dutch, Portuguese, Japanese, Turkish, Ukrainian, Hebrew, Spanish, Urdu India, English
OriginMainland China
For Vehicle Brands/ModelUniversal
CertificationCE
System Setup Password113266

7. User Tips

  • System Stability: This unit runs on a Windows CE system, which is known for its stability and smooth operation, making it less prone to freezing or memory issues compared to some Android systems.
  • Camera Connection: The product supports both wired and wireless camera options. The provided wiring diagram is for a wired camera. If you are using a wireless camera, ensure it is compatible and correctly paired.
  • Audio Output: The unit provides Left and Right Audio Outputs (RCA) which can be used to connect to external amplifiers or subwoofers for enhanced audio performance.
  • Fast Charging: Utilize the built-in smart charging chip for extremely fast charging of your mobile devices.
  • Steering Wheel Controls: Take advantage of the steering wheel learning function to easily control the unit without taking your hands off the wheel.

8. Warranty and Support

The product comes with a 365-day free replacement warranty. If you encounter any quality problems, please contact the seller to confirm the issue. After confirmation, you may return the item for repair or replacement.

Diagram showing the 365 days free replacement warranty terms: Buyer Contact Seller, Confirm The Quality Problems, Buyer Return Item To Seller, Seller performs repairs, Repair completed and package sent.

For technical support or any issues after receiving the goods, please contact the seller via AliExpress message. They aim to respond within 12 hours, accounting for time zone differences. Avoid opening disputes as the platform may not be able to resolve fundamental technical problems effectively. The seller offers lifetime service support.

A detailed user manual in PDF format is available for download: User manual (PDF)

8.1. Extended Warranty

If you provide 5-star feedback and share photos of the product on AliExpress, your warranty may be extended to 2 years.

9. Frequently Asked Questions (FAQ)

Q: How can I get faster shipping?
A: Ensure you provide a correct mobile phone number, post code, and delivery address in the AliExpress order system. Any incorrect information will delay shipping, customs clearance, and local delivery. After placing your order, send your car's detailed information to the seller to avoid mistakes. Pay attention to messages from AliExpress and reply promptly.
Q: How can I get technical support? Can I update the system?
A: Contact technical support using the information on your warranty card or by leaving a message in the AliExpress system. The seller aims to reply within 24 hours. System updates are released periodically to fix bugs; follow the CAIXI official store to receive update notifications automatically.
Q: Will navigation maps be preloaded? How can I update them?
A: Navitel maps are preloaded according to the destination country for testing purposes (map data is updated every July; contact the seller for download links if needed). You can also download and install your local navigation APP from Google Play Store. If you encounter issues, contact the seller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.