Introduction
Thank you for choosing the VASAGLE LBC889 360° Swivel Bar Stools. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
Key Features:
- Elegant Design: A combination of richly textured PU, refined stitching, and tapered legs, embodying a Mid-Century Modern style.
- Superior Comfort: Features an 8 cm thick 58D molded foam seat and a curved backrest for optimal support and comfort.
- 360° Swivel Function: Allows for smooth, effortless rotation, enhancing interaction in any setting.
- Robust Stability: Equipped with sturdy steel legs and articulated adjustable feet to ensure stability on uneven surfaces and protect your floors.
- Easy Maintenance: The PU upholstery is designed for effortless cleaning.
Assembly Instructions
Your VASAGLE LBC889 bar stools require assembly. A mounting kit and instruction manual are included with your purchase. Please follow the steps below carefully.
Before You Begin:
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Verify that all parts listed in the included mounting kit are present.
- Do not fully tighten screws until all components are loosely assembled.
- It is recommended to assemble the stools with two people for ease and safety.
General Assembly Steps:
- Attach the backrest to the seat frame using the provided hardware.
- Secure the seat assembly to the main leg frame.
- Attach the footrest ring to the legs, ensuring it is properly aligned.
- Install the adjustable feet to the bottom of each leg.
- Once all parts are in place, gradually tighten all screws until secure. Do not overtighten.
Refer to the detailed instruction manual included in your package for specific diagrams and hardware identification.
Image: Fully assembled VASAGLE LBC889 bar stools.
Operating Instructions
The VASAGLE LBC889 bar stools are designed for ease of use and comfort.
360° Swivel Function:
The seat of the bar stool features a smooth 360° swivel mechanism. To rotate, simply apply gentle pressure with your body in the desired direction. This allows for easy conversation and movement without needing to reposition the entire stool.
Image: User-friendly design highlighting 360° swivel, curved backrest, and footrest.
Footrest:
The integrated footrest provides additional comfort and support, allowing you to rest your feet while seated. Ensure the footrest is securely attached during assembly.
Adjustable Feet:
The stools are equipped with articulated adjustable feet. These can be manually adjusted to compensate for uneven floors, ensuring the stool remains stable and level. This also helps prevent scratches on your flooring.
Image: Detail of the adjustable feet for stability on uneven surfaces.
Maintenance
Proper care will extend the life and appearance of your bar stools.
Cleaning the PU Upholstery:
The PU upholstery is designed for effortless cleaning. For general cleaning, simply wipe the surface with a soft, damp cloth. For spills, wipe immediately with a clean, dry cloth, then follow with a damp cloth if necessary. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the material.
Image: Easy cleaning of the PU seat material.
Frame Care:
Wipe the steel frame with a soft, dry cloth. Avoid using abrasive cleaners or pads that could scratch the finish.
Regular Checks:
Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability and safety.
Troubleshooting
Here are solutions to common issues you might encounter:
Stool is Wobbly:
- Check Connections: Ensure all screws and bolts are securely tightened. Loosen slightly, adjust the stool to a level position, then retighten.
- Adjust Feet: Use the articulated adjustable feet at the bottom of each leg to level the stool on uneven surfaces. Turn them clockwise or counter-clockwise until stability is achieved.
Swivel Mechanism is Stiff:
- Check for Obstructions: Ensure nothing is obstructing the swivel plate beneath the seat.
- Lubrication: If the mechanism feels stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts of the swivel plate (ensure it does not come into contact with upholstery).
Scratches on Floor:
- The adjustable feet are designed to protect floors. Ensure they are properly installed and intact.
- If feet are worn or damaged, consider replacing them or adding felt pads for extra protection.
Specifications
| Feature | Detail |
|---|---|
| Model Number | LBC889 |
| Brand | VASAGLE |
| Color Options | Green Forest, Caramel Brown, Ink Black, Cream White |
| Materials | Steel, 58D Molded Foam, PU, Plywood |
| Overall Dimensions (each stool) | 57 cm (Depth) x 57 cm (Width) x 101 cm (Height) |
| Seat Height (from floor) | 76 cm |
| Seat Cushion Thickness | 8 cm |
| Total Weight (set of 2) | 14.2 kg |
| Max. Static Load Capacity (each stool) | 120 kg |
| Installation Method | Assembly Required |
| Swivel Function | 360° Rotatable |
| Height Adjustable | No |
| With Handrails | No |
| Illuminated | No |
| Folded | No |
| Style | Minimalist Modern |
Image: Detailed dimensions and maximum load capacity.
Image: Comparison of 58D molded foam (ours) vs. 20D foam (others).
User Tips
- For optimal comfort, ensure the stool height is appropriate for your counter or bar. The 76 cm seat height is ideal for counters approximately 100-110 cm high.
- When moving the stools, lift them rather than dragging to prevent damage to the legs or floor.
- To maintain the aesthetic appeal of the PU upholstery, avoid prolonged exposure to direct sunlight or extreme heat.
Warranty and Support
For any questions, concerns, or issues regarding your VASAGLE LBC889 bar stools, please contact the seller or VASAGLE customer support directly. Please have your model number (LBC889) and purchase information ready when contacting support.
Important Precaution: The maximum static load capacity for each bar stool is 120 kg. Please do not exceed this limit to ensure safety and product longevity.
