SONGMICS 5-Tier Steel Shelving Unit

Contents

SONGMICS 5-Tier Steel Shelving Unit Instruction Manual

Model: 5-Tier Steel Shelving Unit

Introduction

This manual provides detailed instructions for the assembly, safe operation, and maintenance of your SONGMICS 5-Tier Steel Shelving Unit. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Assembled SONGMICS 5-Tier Steel Shelving Units in a garage environment, showcasing their storage capacity for tools and equipment.
Assembled SONGMICS 5-Tier Steel Shelving Units in a garage environment, showcasing their storage capacity for tools and equipment.

Important Safety Information

  • Always use the included wall fixing device to secure the shelving unit to a solid wall. This prevents tipping and ensures stability.
  • Wear work gloves during assembly to protect your hands from sharp edges.
  • Do not exceed the maximum static load capacity of 120 kg per shelf or 600 kg total for the entire unit.
  • This product is not suitable for use in very humid environments, as it may affect the integrity of the MDF boards and steel frame.
  • Ensure the shelving unit is placed on a flat, stable surface.
  • Distribute weight evenly across shelves.
  • Keep children and pets away from the assembly area.

Package Contents

Before beginning assembly, please verify that all parts are present:

  • Steel Frame Components (uprights, crossbars)
  • MDF Boards (5 pieces)
  • Wall Fixing Device (anchors, screws)
  • User Manual (this document)

Assembly Instructions

The SONGMICS 5-Tier Steel Shelving Unit features a tool-free assembly design. Follow these steps carefully:

  1. Prepare the Area: Clear a spacious, flat area for assembly. Lay out all components and ensure you have enough room to work.
  2. Assemble the Uprights: Connect the vertical steel uprights using the interlocking tabs. Ensure the tabs are inserted inward into the slots for a secure fit.
  3. Visual guide for the tool-free assembly process, showing the correct method for engaging the interlocking tabs (tabs inside) and an incorrect method (tabs outside).
    Correct (tabs inside) and incorrect (tabs outside) assembly of interlocking tabs.
  4. Attach Crossbars: Connect the horizontal crossbars to the uprights at your desired shelf heights. The shelves are adjustable in 5 cm increments.
  5. Illustration demonstrating the adjustable nature of the shelves, which can be customized in 5 cm increments to accommodate items of various heights.
    Shelves are adjustable in 5 cm increments.
  6. Insert MDF Boards: Once the frame is assembled, place the MDF boards onto the reinforced crossbars.
  7. Secure to Wall: Using the provided wall fixing device, secure the assembled shelving unit to a sturdy wall. This is crucial for safety and stability.
  8. Optional Configuration: This shelving unit can be divided into two smaller units or configured as a workbench. To do this, assemble the frame components into two separate, shorter units.
  9. Diagram illustrating the shelving unit's ability to be divided into two smaller, customizable units, such as a workbench or two separate low shelves.
    The shelving unit can be configured as two smaller units or a workbench.

Usage Guidelines

  • Load Distribution: Distribute items evenly across each shelf to prevent stress points and maintain stability.
  • Weight Limits: Do not exceed the maximum load capacity of 120 kg per shelf or 600 kg for the entire unit.
  • Heavy Items: Place heavier items on lower shelves to improve the unit's center of gravity and overall stability.
  • Stability Check: Periodically check that the wall fixing device is secure and that all frame connections remain tight.

Care and Maintenance

  • Cleaning: Wipe the steel frame with a damp cloth and mild detergent. Dry immediately to prevent rust.
  • MDF Boards: Clean MDF boards with a dry or slightly damp cloth. Avoid excessive moisture, as it can damage the material.
  • Environment: Do not use or store the shelving unit in highly humid environments to prevent damage to the MDF and potential rust on the steel.
  • Inspection: Regularly inspect the unit for any signs of damage, loose connections, or wear. Tighten any loose parts as needed.

Troubleshooting

Unit feels unstable:
  • Ensure the unit is placed on a level surface.
  • Verify that the wall fixing device is properly installed and secure.
  • Check all interlocking tabs to ensure they are fully engaged and inserted inward.
  • Distribute weight evenly, placing heavier items on lower shelves.
Shelves are not level:
  • Re-check the placement of the crossbars to ensure they are inserted into corresponding slots at the same height on all uprights.
  • Ensure the MDF boards are seated correctly on the crossbars.
Difficulty assembling tabs:
  • Ensure you are wearing work gloves for better grip and protection.
  • Apply firm, even pressure. If a rubber mallet is available, it can be used gently to tap components into place, ensuring tabs are inserted inward.

Specifications

FeatureDetail
Model5-Tier Steel Shelving Unit
Color OptionsBlack (also available in Grey, Silver, Blue, Yellow)
MaterialPowder-Coated Steel Frame, MDF (Medium Density Fiberboard)
Product Dimensions (D x W x H)50 x 100 x 200 cm
Product Weight15.7 kg
Max. Static Load Capacity per Shelf120 kg
Max. Total Static Load Capacity600 kg
Shelf AdjustmentEvery 5 cm
Assembly MethodTool-free, interlocking design
Special FeaturesDivisible into two smaller units, includes wall fixing device
Diagram illustrating the stability and load capacity of the shelving unit. It highlights a total static load capacity of 600 kg and 120 kg per shelf. Detailed views show 4 cm reinforced crossbars, a 5 cm thick steel frame, and 4 mm thick MDF boards.
Detailed specifications on load capacity and material dimensions.

User Tips

  • For easier assembly, ensure all components are correctly oriented before applying force. A rubber mallet can assist in seating the interlocking tabs firmly.
  • Consider using the divisible feature to create a custom workbench with integrated storage, maximizing utility in smaller spaces.
  • When storing items, place frequently accessed tools or materials on easily reachable shelves.

Warranty and Support

For any questions regarding assembly, missing parts, or product performance, please contact SONGMICS customer support. Refer to your purchase documentation for specific warranty details and contact information.

© 2024 SONGMICS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.