CHUNGHOP E772 IR Universal Learning Remote Control

Introduction

The CHUNGHOP E772 is a versatile IR universal remote control designed to simplify your home entertainment experience. Capable of operating up to 7 different devices, it features a flexible learning function, allowing it to replicate functions from your original remote controls. Its permanent memory ensures settings are retained even after battery changes, providing convenience and ease of use for a wide range of appliances.

Product Features

• Easily operate 7 devices with 1 remote (TV1/TV2/SAT/DVD/DVR/CD/AUX).
• Equipped with a learning function for replicating other remote control functions.
• Multi-functional remote control.
• No need to reset after battery replacement (permanent memory function).
• Can truly operate the remote control of appliances with over 1,000 kinds of brands.
• Fast, clear, and simple setup.
• Supports various combined functions (e.g., menu, teletext).

Specifications

Product Dimensions (Packaging)

• Product Dimension: 205 x 50 x 14 (mm)

Setup

1. Battery Installation

• Open the battery compartment cover on the back of the remote control.
• Insert two AAA batteries, ensuring correct polarity (+/-).
• Close the battery compartment cover.

2. Initial Device Setup

The E772 remote control can be programmed to operate various devices. While specific programming codes are not provided in this manual, universal remotes typically use one of the following methods:

• Automatic Code Search: The remote scans through codes until it finds one that operates your device.
• Direct Code Entry: Enter a specific code for your device's brand (refer to a separate code list, if provided with the product).
• Brand Code Search: Cycle through codes for a specific brand.
• Learning Function: This remote is equipped with a learning function, allowing it to replicate functions directly from your original remote control. Refer to the 'Operating Instructions - Learning Function' section for details.

Operating Instructions

1. Device Selection

• Press the corresponding device button (TV1, TV2, SAT, DVD, DVR, CD, AUX) at the top of the remote to select the device you wish to control.
• The remote will then send commands for the selected device.

2. Basic Functions

• Power: Press the red power button to turn the selected device on or off.
• Volume: Use the VOL +/- buttons to adjust the volume.
• Channel/Program: Use the PROG +/- buttons to change channels or programs.
• Navigation: Use the directional arrows and 'OK' button for menu navigation.
• Playback Controls: Use the play, pause, stop, fast forward, rewind buttons for media playback.
• Numeric Keypad: Use the 0-9 buttons to enter channel numbers or other numerical inputs.

3. Learning Function

The E772 remote can learn functions directly from your original remote control. This allows you to customize the remote to your specific needs.

Steps for Learning:

1. Press and hold the 'LEARN' button (often located near the numeric keypad) until the indicator light stays on.
2. Press the device button (e.g., TV1) on the E772 remote you want to assign the learned function to.
3. Point your original remote control's IR emitter directly at the E772's IR receiver (usually at the top) from a distance of 1-3 cm.
4. On your original remote, press the button whose function you want to learn (e.g., 'Menu').
5. On the E772 remote, press the button where you want to store this learned function (e.g., 'MENU/EPG').
6. The indicator light on the E772 should flash to confirm successful learning.
7. Repeat steps 3-6 for all desired functions.
8. Press the 'LEARN' button again to exit learning mode. The indicator light should turn off.

Note: Ensure both remotes have fresh batteries for optimal learning performance.

Maintenance

• Storage: Do not use or place the remote control in damp, high-temperature environments, as this can damage components or accelerate aging and deformation of the casing.
• Cleaning: Do not use water, gasoline, or other organic cleaners to clean the remote, as they are corrosive. Use a soft, dry cloth.
• Battery Replacement: Remove batteries when not in use for a long time to prevent leakage.
• Physical Care: Avoid dropping the remote control from a high place.

Troubleshooting

• Remote control not working: If your remote control does not work, do not attempt to repair it yourself. Send it to a home appliance maintenance department for repair.
• Some keys not working: If some keys cannot be used, it is possible that the inner contact of the remote control is dirty. Carefully open the remote, dip a little anhydrous alcohol on a cotton swab for cleaning the conductive rubber and circuit board buttons, and then dry it with a blow-dryer. Caution: Opening the remote control may void your warranty. Proceed with caution or seek professional assistance if uncomfortable.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly.