1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your Hytera PD56X series Digital Mobile Radio (DMR) walkie-talkie. The PD56X series includes models such as PD560, PD562, PD565, PD566, and PD568, offering reliable two-way communication in both VHF and UHF frequency bands. Please read this manual thoroughly before using your radio.

2. Key Features
- Digital Mobile Radio (DMR) Technology: Provides clear digital audio and enhanced communication efficiency.
- VHF & UHF Frequency Support: Operates across a wide range of frequencies (VHF: 136-174MHz; UHF: 400-470MHz) for versatile use.
- High Output Power: 5W output power ensures strong signal transmission over longer distances.
- Extended Talk Range: Capable of communication up to 5 kilometers under optimal conditions.
- Ample Storage Channels: Features 512 storage channels for various communication groups and settings.
- IPX5 Water Resistance: Designed to withstand water splashes, making it suitable for outdoor and demanding environments.
- Compact Handheld Design: Ergonomic and portable for easy carrying and operation.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | HYTERA |
| Model Number | PD56X (PD560, PD562, PD565, PD566, PD568) |
| Walkie Talkie Type | Digital Mobile Radio |
| Terminal Style | Handheld |
| Frequency Type | VHF & UHF |
| Frequency Range | UHF: 400-470MHz; VHF: 136-174MHz |
| Output Power | 5W |
| Talk Range | 5KM |
| Storage Channel | 512 |
| Dimensions | 115*54*30mm |
| Water Resistance Level | IPX5 |
| Origin | Mainland China |
| Installation Method | Assembly (Note: This typically refers to initial setup of components like antenna/battery) |

4. Setup Guide
- Unpacking: Carefully remove all components from the packaging. Ensure you have the radio unit, battery, antenna, belt clip, and charger.
- Battery Installation:
- Align the battery with the grooves on the back of the radio.
- Press the battery firmly until it clicks into place.
- To remove, slide the battery release latch and pull the battery away.
- Antenna Attachment:
- Screw the antenna into the connector on the top of the radio clockwise until it is finger-tight. Do not overtighten.
- Charging the Battery:
- Place the radio with the battery installed into the charging cradle.
- Connect the charger to a power outlet.
- The charging indicator on the radio or charger will show the charging status (e.g., red for charging, green for fully charged).
- Allow approximately 3 hours for a full charge.
- Attaching the Belt Clip:
- Align the belt clip with the screw holes on the back of the radio and secure it with the provided screws.
5. Operating Instructions
- Power On/Off:
- To power on, rotate the On/Off/Volume knob clockwise until you hear a click and the radio powers up.
- To power off, rotate the knob counter-clockwise until you hear a click.
- Adjusting Volume:
- Rotate the On/Off/Volume knob clockwise to increase volume and counter-clockwise to decrease volume.
- Channel Selection:
- Use the Channel Selector knob (usually on top) or the up/down navigation buttons to select the desired channel.
- The display will show the current channel number or name.
- Transmitting (Push-to-Talk - PTT):
- Before transmitting, ensure the channel is clear.
- Press and hold the PTT button (located on the side of the radio).
- Speak clearly into the microphone, holding the radio approximately 2-5 cm from your mouth.
- Release the PTT button to listen for a response.
- Receiving:
- When a signal is received on your selected channel, the radio will automatically play the audio.
- Programmable Buttons (P1, P2, P3):
- Your radio features programmable buttons (P1, P2, P3) which can be assigned various functions (e.g., scan, zone switch, emergency call) via programming software. Refer to your dealer for specific programming details.
6. Maintenance and Care
- Cleaning:
- Clean the radio surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure all ports are dry before use, especially after exposure to water.
- Battery Care:
- Charge the battery fully before initial use.
- Avoid overcharging or completely draining the battery to prolong its lifespan.
- Store batteries in a cool, dry place when not in use.
- Antenna:
- Do not operate the radio without an antenna attached.
- Avoid bending or damaging the antenna, as this can affect performance.
- Storage:
- When storing the radio for extended periods, remove the battery.
- Store in a dry, dust-free environment away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly. | Charge the battery fully. Reinstall the battery securely. |
| Cannot transmit or receive | Incorrect channel selected, out of range, or antenna not attached. | Verify channel. Move closer to other radios. Ensure antenna is securely attached. |
| Poor audio quality | Low battery, weak signal, or microphone/speaker obstruction. | Charge battery. Move to an area with better signal. Check for obstructions on microphone/speaker. |
| Radio gets hot during use | Prolonged transmission or high power setting. | Reduce transmission time. This is normal for high-power radios; if excessively hot, power off and contact support. |
8. Warranty and Support
Hytera products are designed for durability and performance. This product typically comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact your authorized Hytera dealer for specific warranty terms and conditions.
For technical support, service, or replacement parts, please contact your local Hytera service center or the retailer from whom you purchased the product.
Important Notes:
- Unauthorized repairs or modifications will void the product warranty.
- Use only genuine Hytera accessories to ensure optimal performance and safety.