E-ACE A20P

Contents

E-ACE A20P 10-Inch 1080P Car DVR Camera Instruction Manual

Model: A20P

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your E-ACE A20P 10-Inch 1080P Car DVR Camera. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage.

While every effort is made to ensure the accuracy of this guide, specifications and other details may vary slightly due to product improvements.

Note: Please carefully review the accessories included in your package based on your specific order. The items included in the SKU package are subject to the package pictures.

2. Features and Specifications

2.1 Key Features

  • Streaming Media DVR Mirror: Full screen display of rear image in real-time.
  • 1:1 Split Screen: Simultaneous display of front and rear camera views.
  • 10-Inch Touch IPS Screen: Large, high-resolution touch display for easy operation.
  • 170° Wide Front Camera Angle: Provides a broad view of the road ahead.
  • 140° Wide Rear Camera Angle: Offers a good view for reversing.
  • 6 Glass HD Lens: Enhanced clarity and detail, with adjustable exposure.
  • 2.5D Curved Surface Screen: Scratch-resistant, anti-glare, and anti-fingerprint design.
  • Real-time Display Reverse Parking View: Automatically switches to rear camera with parking lines when reversing.
  • Full HD 1080P Video Quality: Captures vital details like license plates and road features.
  • Loop Recording: Overwrites oldest video files when the memory card is full, except for protected files.
  • Motion Detection: Automatically starts recording when a moving object is detected.
  • G-Sensor: Triggers immediate recording and locks video upon impact or emergency.
  • Parking Monitoring: Records video when the vehicle is bumped while parked (requires Hardwire Kit for 24H monitoring).
  • Wide Dynamic Range (WDR): Ensures clear video and image quality in varying light conditions.

2.2 Technical Specifications

AttributeValue
Installation TypeRearview Mirror
Screen (Display) Size10 Inch Touch LCD Screen
Chipset (Processor/CPU)Generalplus
Camera SensorFront 2MP + Rear 2MP
Camera LensFront: 6 Glass, 170 Degree Angle, F2.0 Aperture; Rear: 4 Glass, 140 Degree Angle, F2.0 Aperture
Video ResolutionFront: 1920x1080P@30FPS; Rear: 1920x1080P@30FPS
Photo Resolution12M
Video CodeMJPG (H.264 also supported)
Video FormatMOV, TS, MP4
BatteryBuilt-In (small capacity, for saving time/settings only)
OSD LanguagesArabic, Armenian, Chinese (Simplified), Danish, Dutch, English, Finnish, French, Japanese, Latin, Macedonian, Polish, Russian, Spanish, Thai, Vietnamese, Welsh
Memory CardMicro SD Card, Class 10, 16GB to 128GB (Not included)
GPS LoggerExternal
InterfaceUSB 2.0, AV-In, Micro SD/TF
Power SourceCorded Electric (12V compatible)
Package Dimensions34cm (L) x 16cm (W) x 8cm (H)
Package Weight0.702 kg

2.3 Package Contents

The standard package includes:

  • 1 x DVR Mirror (A20P)
  • 1 x Power Charger (Car charger)
  • 1 x User Manual
  • 2 x Fixed Bandages
  • 1 x USB Card Reader (Gift)

Optional parts (depending on your purchase):

  • 1 x 1080P Night Vision Rearview Camera with 6 or 10 Meters Cable
  • 1 x Buck Line for 24H Parking Monitoring (Hardwire Kit)
  • 1 x Real Class 10 High Speed TF Card (16GB to 128GB)
Package contents for E-ACE A20P DVR, showing the mirror unit, car charger, fixed bandages, user manual, and optional rear camera with cable and hardwire kit.
Figure 2.3.1: Package contents for the E-ACE A20P DVR. Optional components are shown below the main items.

3. Setup and Installation

3.1 Parts Identification

Diagram showing the E-ACE A20P DVR with labels for Power Button, 10-inch Touch Screen, Horn, Lace, TF Card Slot, Rear Pull Hole, USB Hole, and HD Lens.
Figure 3.1.1: E-ACE A20P DVR Parts Diagram. Key components include the Power Button, 10-inch Touch Screen, TF Card Slot, USB Hole, and HD Lens.
  • TF Card Slot: Insert your Micro SD card here.
  • Rear Camera Interface: Connect the rear camera cable.
  • Power Input: Connect the car charger or hardwire kit here.
  • Reset Button: Used to restore factory settings.
  • Power Button: Used to turn the device on/off and control the display.

3.2 Initial Installation

  1. Protective Film: The device comes with a protective film to prevent damage during transportation. Remove this film before use.
  2. Power Supply: Use only the original power supply provided. Using other power supplies may damage or burn the equipment.
  3. Mounting: Install the DVR near your car's rearview mirror to maximize the wide-angle recording. Ensure the front camera lens is within the wiper's range for clear recording in rain.
  4. Lens Care: Avoid touching the lens with your fingers. Clean the lens regularly with a soft cloth to remove dust. Do not use chemical detergents, gasoline, alcohol, or antistatic sprays.
  5. Truck Compatibility: If using in a truck, verify the length of the car charger line is sufficient.

3.3 Rear Camera Installation

The rear camera cable comes in 6-meter and 10-meter options to suit different vehicle lengths. Choose the appropriate cable for your car.

Diagram showing a car with a 6-meter rear camera cable and a larger vehicle with a 10-meter rear camera cable, illustrating cable length selection based on vehicle size.
Figure 3.3.1: Rear Camera Cable Length Selection. Choose 6m for standard cars or 10m for larger vehicles.

To enable the reversing line function:

  • Connect the red cable wire of the rear camera to the positive (+) pole of your car's reversing lamp power.
  • Plug the car charger into the cigarette lighter to power the DVR.
  • When you engage reverse gear, the DVR will automatically switch to the rear camera view with parking lines.
Wiring diagram for the rear camera, showing the red wire connecting to the positive pole of the reversing light.
Figure 3.3.2: Rear Camera Wiring Diagram. Connect the red wire to the positive terminal of the reversing light.

3.4 Hardwire Kit Installation (for 24H Parking Monitoring)

The Hardwire Kit allows the DVR to continue monitoring after parking without occupying the cigarette lighter interface. It also provides 24-hour parking monitoring.

  • Negative Pole (Black Line): Connect to the ground of the car fuse box.
  • Positive Pole (Red Line) for 24H Monitoring: Connect to the BAT interface of the car fuse box. This allows the DVR to work 24 hours.
  • Positive Pole (Red Line) for Parking Monitoring only when ACC is ON: Connect to the ACC interface of the car fuse box. The DVR will not work after parking if connected this way.
Wiring diagram for the hardwire kit, showing connections for GND, ACC, and BAT/ACC(+) in the car fuse box for 24-hour parking monitoring.
Figure 3.4.1: Hardwire Kit Wiring Diagram. Connect GND to car metal, ACC to switched power, and BAT to constant power for 24-hour monitoring.

Attention: The DVR is only compatible with cars that have a 12V power supply. A 24V power supply will burn the motherboard. If you want to use 24V, please add a 24V to 12V Converter (BL).

3.5 Micro SD Card

The E-ACE A20P requires a high-quality Class 10 Micro SD Card, with a capacity between 16GB and 128GB. It is recommended to format the Micro SD card before its first use in the dash cam.

4. Operation

4.1 Power Button Functions

  • To Turn On/Off: Press and hold the Power Button for 2 seconds. The DVR will automatically start recording upon power-on. When turning off, it will save video files and user settings.
  • To Control Display: While powered on, short press the Power Button to turn the display black. Press again to turn it back on.

4.2 Main Interface and Touch Controls

Main interface of the E-ACE A20P DVR, showing time, speed, and icons for DVR, Photo, Playback, and Settings.
Figure 4.2.1: Main Interface of the E-ACE A20P DVR. Displays current time, speed, and quick access icons.
  • DVR Icon: Initiates video recording.
  • Photo Icon: Takes a photo during recording.
  • Playback Icon: Enters the playback interface to view recorded files.
  • Settings Icon: Enters the settings menu.

4.3 Screen Operations

  • Slide Up and Down: Change the display position of the current camera video screen. This action will be saved.
  • Slide Left and Right: Change the video display source (front view, rear view, split screen) or adjust screen brightness. This action will be saved.

4.4 Key Functions and Settings

  • Loop Recording: Records video in a continuous loop, overwriting the oldest files when the memory card is full. Protected files (from G-Sensor or Parking Monitor) are not overwritten. You can set the recording time interval in the settings.
  • G-Sensor: Automatically detects sudden shakes or collisions and locks the current video footage to prevent it from being overwritten. Sensitivity can be adjusted (OFF/LOW/MIDDLE/HIGH).
  • Motion Detection: When enabled, the DVR automatically starts recording when it detects movement in front of the camera.
  • Parking Monitoring: When activated, the dash camera will automatically turn on and record if it detects vibration while parked. This feature requires a Hardwire Kit for continuous 24-hour monitoring.
  • Time Lapse Recording: Offers options for 5 hours, 12 hours, or 24 hours of time-lapse recording. The screen will turn off after 5 seconds of inactivity.
  • Resolution: Adjust video resolution (4K/2.5K/1080P/720P) in the settings.
  • Time & Date: Set the current RTC time and date in the settings menu.
  • Brightness Adjustment: Adjust screen brightness by sliding up/down or left/right on the screen.
  • License Plate: Input your license plate number in the settings menu.
  • WIFI Function: Enable WIFI in settings. A white icon indicates WIFI is on, and it turns green when connected to the mobile app. Scan the QR code in the WIFI settings to download the APK.
  • GPS Function: When the GPS module is plugged in, a white GPS icon appears. It turns green when a GPS signal is received, and the GPS speed will be displayed.
  • Stream Media: Toggle between 'on' (rear camera full screen) and 'off' (front camera full screen) display modes.
  • Screen Sleep: Set the screen to turn off after a specified time (10s, 30s, 3min) or disable it. Recording continues even when the screen is off.
  • Factory Reset: Restore all settings to their default values.
Video display comparison between 1080P and 720P, and an in-car view of the DVR mirror showing the road ahead.
Figure 4.4.1: Video Quality Comparison and In-Car View. Demonstrates 1080P clarity and the DVR's perspective.
Split screen display showing front and rear camera views simultaneously on the E-ACE A20P DVR.
Figure 4.4.2: 1:1 Split Screen Display. Shows front and rear camera views side-by-side.
Comparison image showing a dark scene and the same scene with WDR (Wide Dynamic Range) enabled, appearing bright and clear.
Figure 4.4.3: Wide Dynamic Range (WDR) Effect. Enhances image clarity in challenging light conditions.
Image showing a car reversing with parking lines overlaid on the rear camera feed, indicating the parking monitoring feature.
Figure 4.4.4: Real-time Display Reverse Parking View. Parking lines assist with safe reversing.
Illustration of a car accident with a padlock icon, symbolizing the G-Sensor locking video footage upon impact.
Figure 4.4.5: G-Sensor Activation. Automatically protects video evidence during collisions.
Video 4.4.6: Product demonstration video showcasing the E-ACE A20P's features, including day/night recording, reversing lines, and touch screen interface.

5. Maintenance

  • Lens Cleaning: Regularly clean the camera lenses with a soft, dry cloth. Avoid using harsh chemicals.
  • SD Card Formatting: It is recommended to format the Micro SD card periodically (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can be done through the DVR's settings menu.
  • Software Updates: Check the manufacturer's website or contact support for any available firmware updates to ensure your device has the latest features and bug fixes.

6. Troubleshooting (Frequently Asked Questions)

6.1 Dash Cam Not Turning On

  • Ensure the car charger is properly plugged in and try pressing the On-Off key for about 3 seconds.
  • Charge the dash cam for approximately 5 minutes, then try turning it on and manually restore factory settings.
  • Press the Reset button (using a pin) to restore factory settings.

6.2 Automatic On/Off

  • The dash cam requires continuous power from the car charger. The built-in battery is small and primarily for parking monitor mode.
  • Ensure you are using a Class 10 or above Micro SD Card and that it has been formatted.

6.3 Product Cannot Read SD Card

  • Use a genuine Class 10 or above Micro SD Card.
  • Format the SD Card on a computer before use, then insert it correctly into the slot (there should be slight resistance when inserted correctly).

6.4 Video Function Not Working Normally

  • Format the Micro SD card in the dash cam.
  • Ensure the Micro SD card is Class 10 and within the recommended capacity (16GB-128GB).

6.5 Abnormal Operation After Extended Use

  • If G-sensor sensitivity is too high, it may create too many locked files, preventing loop recording. Manually delete locked files or adjust G-sensor sensitivity to medium or low.
  • Avoid using motion detection when not driving, as it can fill up the card with unnecessary recordings.

6.6 Rear Camera Issues

  • Not Working: Check if the rear camera is connected properly and securely.
  • Image Upside Down: The rear camera is installed in the wrong direction. Adjust its physical orientation.

6.7 Screen Issues

  • Screen Turns Black After One Minute: The "Screen Dormant" function might be enabled in settings. Turn it off.
  • Recorded Image Unclear: Remove any protective films from both front and rear camera lenses. Ensure the windshield is clean.

6.8 Date and Time Issues

  • Ensure the device has sufficient power. Set the date and time in the system settings, then manually turn off the dash cam to save the settings.
  • If recordings show incorrect dates/times, follow the same procedure to set and save.

6.9 Other Issues

  • Product Heats Up: This can occur after long periods of use or in high car temperatures. This is generally normal.
  • Noisy Button Sound: Select "OFF" for the operation voice (OFF/ON) button in the system settings.

7. User Tips

  • For optimal performance, always use a high-quality Class 10 Micro SD card. Lower quality or slower cards may cause recording issues.
  • The E-ACE A20P supports simultaneous display of both front and rear camera views, which can be very helpful for monitoring your surroundings while driving.
  • Regularly check and clean both camera lenses to ensure clear recordings.
  • If you intend to use the 24-hour parking monitoring feature, ensure you have the optional Hardwire Kit installed correctly to provide continuous power.

8. Warranty and Support

8.1 Warranty Information

  • 30-Day Money-Back Guarantee: Return your undamaged product within 30 days of purchase for any reason to receive a full refund.
  • 12-Month Warranty for Quality-Related Issues: For 12 months from the date of purchase, all quality-related issues will be addressed with a replacement or full refund.

Friendly Reminder:

Please ensure you read this user manual and use the product as instructed. When contacting support for assistance, have your product handy for troubleshooting.

8.2 Limitations

Our returns and exchange service is limited to purchases made from authorized stores. If you purchased through a different retailer, please contact them directly. Unauthorized reselling of our products is prohibited.

8.3 Contact Information

For further assistance or inquiries, please use the following contact details:

  • Website: www.e-ace.cn
  • Email: fireking@e-ace.cn
  • Phone: +86 0755-8464 4084
  • Tel (WhatsApp): +86-18127083357
  • Address: Floor 2nd, No.1 Yuanxia street, Pingshan District, Shenzhen City, Guangdong Province, 518000, China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.