HOMEFISH HD-10

Contents

HOMEFISH HD-10 Portable Blender

User Manual

Model: HD-10 | Brand: HOMEFISH

1. Basic Product Information

This product is a daily consumer good designed for daily household and personal use, made of safe and eco-friendly qualified materials, meeting standard consumer product specifications. It is suitable for daily routine use by ordinary consumers, covering common daily application scenarios.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • Main product (Portable Blender) x 1
  • USB-C Charging Cable x 1
  • Cleaning Brush x 1
  • User Manual x 1
Diagram showing blender features and included accessories
Overview of the blender and its key features, including the 700ml capacity, leak-proof lid, IPX7 waterproof rating, 360W motor, 6-edge blade, and Type-C charging.

3. Safety Instructions & Warnings

Please read all safety notes carefully before use to avoid personal injury or product damage, and keep this manual for future reference.

  1. This product is for daily household and personal use only, strictly prohibited for industrial, commercial or other non-daily special purposes.
  2. Keep the product away from open fire, high temperature sources, sharp objects and corrosive substances to prevent deformation, damage or safety hazards.
  3. Do not disassemble, modify, soak or wash the product randomly unless it is clearly marked as waterproof and washable on the product surface.
  4. Keep the product out of reach of children under 3 years old and pets, to avoid accidental swallowing, scratching or other injuries.
  5. Stop using the product immediately if it is damaged, cracked or works abnormally, and do not continue to use defective products to ensure safety.
  6. Place the product in a stable and flat place, avoid placing it in high places where it may fall or be pulled down easily.
  7. Do not use the blender while it is charging.
  8. Avoid microwaving, exposing to hot water (>50°C), or cleaning in a dishwasher (except for specified parts like the cup and lid).
  9. Always ensure the motor base, especially the charging port, remains dry to protect internal components.

4. Setup

4.1 Initial Inspection

Take out the product from the outer package gently, check the product appearance to ensure it is intact before use.

4.2 Charging the Blender

Before first use, fully charge the blender. The battery capacity is 6000mAh, providing ample power for multiple blends.

  • Connect the provided Type-C charging cable to the blender's charging port.
  • Plug the other end of the cable into a 5V/2A power source, such as a power bank, car charger, or a standard charging adapter.
  • The LED indicator lights will flash blue during charging.
  • When fully charged, the blue light will be continuously on.
  • Charging time is approximately 4-5 hours for a full charge.
Image showing the 6000mAh rechargeable battery and LED power indicators
The image illustrates the 6000mAh rechargeable battery and how the LED lights indicate power levels: 3 blue lights for 67%-99% power, 2 blue lights for 34%-66% power, and 1 blue light for 1%-33% power. It also shows charging options via power bank, car, or adapter.

4.3 Assembly

Proper assembly is crucial for the blender's safety and operation. The blender features a safety mechanism that prevents it from starting if not correctly assembled.

  • Place the cup onto the motor base.
  • Twist the cup clockwise until it is securely tightened. Ensure the convex marks on the cup and main body are aligned for correct assembly.
  • The lid should also be securely closed before operation to prevent leaks.
Diagram of the portable blender parts and their labels
This diagram labels the main components: Mini Enjoy Cup, Carry handle, 700ml food grade Tritan jar, 6-shape stainless steel blade, LED Indicator, Power Switch, and Type-C Charging port.

5. Operating Instructions

5.1 Preparation

  • Cut fruits and vegetables into small pieces, approximately 1-2 cm (0.4-0.8 inches), to ensure smooth blending and prevent jamming.
  • Add sufficient liquid (water, milk, juice) to the cup. Ensure the liquid covers the blades and ingredients are not packed too tightly. Do not overfill the 700ml capacity.

5.2 Blending

  • Once ingredients are added and the cup is securely assembled, double-click the power button to start the blender.
  • The 360W motor and 22000 rpm speed are designed for efficient blending, even with ice and frozen fruits.
  • For optimal blending, especially with thicker mixtures or ice, gently shake or invert the blender during operation to help circulate ingredients and prevent them from settling.
  • The blender has a single working time of approximately 40 seconds and will automatically stop. You can double-click again to continue blending if needed.
Video demonstrating the blending of ice cubes in the portable blender, showcasing its power and efficiency.

5.3 LED Indicators

The LED lights on the blender base provide important information:

  • Charging Indication: Blue light flashes.
  • Fully Charged: Blue light is always on.
  • Power Level:
    • 67%-99% power: 3 blue lights on
    • 34%-66% power: 2 blue lights on
    • 1%-33% power: 1 blue light on
  • Low Battery Protection: Blue light off, red light on for 5 seconds.
  • Stall Protection: Blue light flashes quickly for 5 seconds (indicates motor overload or jam).
  • Smart Magnetic Induction: Red and blue lights flash alternately for 2 seconds (indicates improper assembly or magnetic interference).
  • Working with one grid remaining: Blue light is off, and the red light flashes slowly.
Image detailing thoughtful design features including power display
This image highlights thoughtful details such as the direct drinking mouth, the power display with percentage adaptive display, and the portable handheld design.

6. Cleaning & Maintenance

6.1 Cleaning

  • The blender features an IPX7 waterproof rating, allowing for full body washing without water leakage. This means you can rinse the cup and blade assembly directly under running water.
  • For quick and easy cleaning, utilize the 40-second self-cleaning mode: add water and a drop of dish soap to the cup, then double-click the power button to run.
  • Wipe the exterior surface of the product with a soft dry cloth or a soft damp cloth (ensure the cloth is well-wrung out).
  • Important: Do not use strong corrosive detergents, alcohol, or chemical cleaning agents, as these can damage the product's finish.
  • While the body is waterproof, it is recommended to avoid submerging the motor base in water for extended periods. Always keep the charging port and the base dry to protect internal electronic components.
  • The cup and lid are dishwasher-safe for convenience, but the motor base is NOT dishwasher-safe.
Image showing the blender being rinsed under water, highlighting its IPX7 waterproof feature
The image demonstrates the XIP7 (IPX7) waterproof capability, allowing for full body washing without water leakage, ensuring easy and confident cleaning.

6.2 Storage

  • After daily use, clean the product and store it in a cool, dry, and ventilated environment.
  • Avoid damp and closed spaces to prevent potential damage.
  • Avoid long-term exposure to direct sunlight, which may cause color fading or material aging.

6.3 Inspection

Check the product status regularly. Replace it in time if there is obvious wear or damage.

7. Troubleshooting

Problem Possible Cause Solution
Blender does not start
  • Cup not securely attached to the motor base.
  • Low battery.
  • Power button not double-clicked.
  • Smart magnetic induction not detecting magnet (improper assembly).
  • Ensure the cup is twisted tightly onto the motor base until the safety mechanism engages.
  • Recharge the blender fully.
  • Double-click the power button to start.
  • Re-assemble the cup and base, ensuring proper alignment.
Blender stops during operation
  • Stall protection activated (motor overload/jam).
  • Automatic 40-second cycle completed.
  • Low battery.
  • Reduce ingredients, add more liquid, or cut ingredients into smaller pieces. Restart.
  • Double-click the power button to restart the blending cycle.
  • Recharge the blender.
Ingredients not blending smoothly
  • Insufficient liquid.
  • Ingredients too large or too many.
  • Ingredients settling at the bottom.
  • Add more liquid.
  • Cut ingredients into smaller pieces. Do not overfill.
  • Gently shake or invert the blender during operation.
Leakage
  • Lid not securely closed.
  • Cup not tightly screwed onto the base.
  • Seal/gasket improperly placed or damaged.
  • Ensure the lid is firmly closed.
  • Tighten the cup onto the motor base.
  • Check the rubber seal/gasket for proper seating and any signs of damage. Replace if necessary.

8. Specifications

Feature Specification
Model HD-10
Product Size 97 x 97 x 294 mm (approx. 27cm height x 10cm diameter)
Bottle Capacity 700ml
Bottle Material Food-grade Tritan (BPA-free)
Base Shell Material ABS
Blade Material 304 Stainless Steel (6-edge shape)
Working Voltage 12V
Charging Voltage/Current 5V/2A
Battery Capacity 6000mAh
Motor Speed 22000 rpm
Power 360W
Charging Time Approx. 4-5 hours
Single Working Time 40 seconds
Waterproof Rating IPX7 (Fully sealed waterproof body)
Function Automatic Pulp Ejection
Table of product parameters for the HD-10 blender
A detailed table outlining the product parameters including model, capacity, endurance, product size, waterproof rating, and material quality.

9. User Tips

Based on user experiences, here are some helpful tips for getting the most out of your HOMEFISH HD-10 Portable Blender:

  • Optimal Blending: For the creamiest smoothies, especially with frozen fruits or ice, ensure you add enough liquid. Gently turn or invert the blender in your hands while it's operating to help the ingredients circulate and blend more thoroughly.
  • Safety First: The blender will not operate while charging. Always disconnect the charging cable before attempting to blend.
  • Secure Assembly: The built-in safety feature requires the cup to be properly closed and securely twisted onto the motor base. If the blender doesn't start, double-check the assembly.
  • Portability Advantage: This wireless blender is highly convenient for on-the-go use. It's a great companion for work, university, gym, or any outdoor activity.
  • Cleaning Care: While the blender body is IPX7 waterproof, it's best practice to avoid getting the charging port and the motor base excessively wet. Wipe them dry immediately after cleaning to ensure longevity.
  • Ice Crushing: This blender is powerful enough to crush ice effectively, making it suitable for a variety of cold beverages.

10. Compliance Statement

This product complies with relevant international consumer goods safety standards and platform listing requirements, and is a qualified daily consumer product for normal sale and use.

11. Warranty & Support

For any questions, technical support, or warranty claims regarding your HOMEFISH HD-10 Portable Blender, please refer to the seller's contact information or the official product page where you made your purchase.

A detailed user manual in PDF format is also available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.