Miboxer FUT035S/FUT036S/FUT037S/FUT038S/FUT039S

Contents

Miboxer 2.4GHz LED Controller Instruction Manual

Models: FUT035S, FUT036S, FUT037S, FUT038S, FUT039S

Brand: Miboxer | Mi-Light

1. Introduction and Features

The Miboxer 2.4GHz LED Controllers utilize advanced 2.4GHz wireless technology, offering low power consumption, long signal transmission, and strong anti-interference capabilities. These controllers feature auto-transmitting and auto-synchronizing functions, making them suitable for various lighting applications, including hotel and home lighting.

Various Miboxer 2.4GHz LED Controller models

Figure 1: Overview of Miboxer 2.4GHz LED Controller models (FUT035S, FUT036S, FUT037S, FUT038S, FUT039S).

Key Features:

  • Wireless Technology: Utilizes 2.4GHz RF wireless transmission for reliable control.
  • Control Distance: Up to 30 meters in barrier-free spaces.
  • Signal Transmitting: One light can transmit signals to another within 30m, extending control range.
  • Modes Synchronization: Multiple lights can synchronize dynamic modes and speed.
  • App Control: Supports smartphone app control (requires an additional 2.4G gateway like WL-Box1).
  • Voice Control: Compatible with third-party voice control systems (requires an additional 2.4G gateway).

Model-Specific Features:

  • FUT035S (Dual White LED Controller): Color temperature adjustable, dim brightness.
  • FUT036S (Single Color LED Controller): Dim brightness.
  • FUT037S (RGB LED Controller): 16 million colors, mix Red, Green, Blue to adjust color temperature, dim brightness/saturation.
  • FUT038S (RGBW LED Controller): 16 million colors, dim brightness/saturation, white mode.
  • FUT039S (RGBCCT LED Controller): 16 million colors, mix Red, Green, Blue to adjust color temperature, dim brightness/saturation, white mode, DMX512 controllable (requires DMX512 LED transmitter).
Miboxer controller supporting Tuya smart app and third-party voice control

Figure 2: The controller supports Tuya smart app control and third-party voice control (a 2.4G gateway is required for these features).

2. Specifications

Attribute Value
Model NumberFUT035S/FUT036S/FUT037S/FUT038S/FUT039S
Input VoltageDC12-24V
Output Current6-12A/Channel
Total OutputMax 12A
Output Power144W @ DC12V, 288W @ DC24V
Output TypeConstant Voltage
Working Temperature-10~40°C
RF Frequency2.4GHz
Control Distance30m (Barrier-free space)
Connection Mode2.4GHz
Controlled Method2.4GHz
MaterialABS
Power SourceDC
Applicable LightsSingle/Dual color RGB RGBW RGBCCT Strip Light
Item TypeRGB controller
Output ConnectionCommon anode
Dimming Grayscale4096 Levels
Dimming CurveLogarithmic
IP RatingIP20
CertificationsCCC, CE, EMC, FCC, LVD, ROHS, UL
FCC ID2AJWW-FUT037S
Dimensions (Controller)76mm (L) x 24mm (W) x 37mm (H)
Package Weight0.047 kg
Miboxer controller size comparison with a credit card and a quarter coin

Figure 3: The compact size of the controller, shown next to a credit card and a quarter coin for scale.

3. Setup and Installation

Wiring Diagrams:

Ensure all connections are made with the power supply turned off. Connect the LED strip to the controller's output terminals and the power supply to the controller's input terminals, observing correct polarity (V+ and V-).

Wiring diagram for Single Color LED strip with Miboxer controller

Figure 4: Wiring diagram for Single Color LED strip.

Wiring diagram for Dual White LED strip with Miboxer controller

Figure 5: Wiring diagram for Dual White LED strip.

Wiring diagram for RGB LED strip with Miboxer controller

Figure 6: Wiring diagram for RGB LED strip.

Wiring diagram for RGBW LED strip with Miboxer controller

Figure 7: Wiring diagram for RGBW LED strip.

Wiring diagram for RGBCCT LED strip with Miboxer controller

Figure 8: Wiring diagram for RGBCCT LED strip.

4. Operating Instructions

4.1 Linking Code Instructions

  1. Switch off the light, wait for 10 seconds, then switch it on again.
  2. While the light is on, short press the "I" button on the remote control 3 times within 3 seconds.
  3. The light will blink 3 times slowly, indicating successful linking.

Note:

  • If linking fails (light does not blink slowly), please follow the steps again.
  • A light that has already been linked cannot be linked again.
Diagram showing steps for linking the LED controller with a remote control

Figure 9: Visual guide for linking the controller to a remote.

4.2 Unlinking Code Instructions

  1. Switch off the light, wait for 10 seconds, then switch it on again.
  2. While the light is on, short press the "I" button on the remote control 5 times within 3 seconds.
  3. The light will blink 10 times quickly, indicating successful unlinking.

Note:

  • If unlinking fails (light does not blink quickly), please follow the steps again.
  • Lights that have not been linked do not need to be unlinked.
Diagram showing steps for unlinking the LED controller from a remote control

Figure 10: Visual guide for unlinking the controller from a remote.

4.3 Signal Transmitting

One light can transmit signals from the remote control to another light within 30 meters. As long as there is a light within 30 meters, the remote control distance can be limitless.

Diagram illustrating signal transmitting between remote, light, and another light

Figure 11: Signal transmitting and extended control range.

4.4 Modes Synchronization

Different lights can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and within a 30-meter distance. The same dynamic mode and speed can be synchronized.

4.5 "Do Not Disturb" Mode

This mode can be activated or deactivated via remote control, useful in areas with frequent power failures to save energy.

To Turn On "Do Not Disturb" Mode:

Press the "OFF" button three times within three seconds, then press the "ON" button three times. The LED light will flash four times quickly, indicating successful activation.

Attention: Do not disturb mode is activated.

  • When the light is OFF: Turn off and on power twice to activate the light or use the app/remote.
  • When the light is ON: Turn off and on power once.

To Turn Off "Do Not Disturb" Mode:

Press the "ON" button three times within three seconds, then press the "OFF" button three times. The LED light will flash four times slowly, indicating successful deactivation.

Attention: The light will always be in the "ON" status if you turn off and on power once after closing "Do Not Disturb" mode.

4.6 PWM High Frequency / Low Frequency Switching

Switch to High Frequency: (when the light is on)

  1. Short press the "OFF" button of the remote control once.
  2. Short press the "ON" button 5 times within 3 seconds. The white light will blink 2 times quickly, indicating success.

Switch to Low Frequency: (when the light is off)

  1. Short press the "ON" button of the remote control once.
  2. Short press the "OFF" button 5 times within 3 seconds. The white light will blink 2 times slowly, indicating success.

4.7 Dynamic Mode Table Selection

The controller offers two dynamic mode tables. You can switch between them:

  • Select Dynamic Mode Table 1 (Default): While the light is in static mode, short press the "S+" button 5 times quickly until the blue light flashes 3 times slowly.
  • Select Dynamic Mode Table 2 (Manual Switch): While the light is in static mode, short press the "S-" button 5 times quickly until the yellow light flashes 3 times slowly.

Dynamic Mode Table 1 (Default)

Number Dynamic Mode Brightness / Saturation / Speed
1Mardi GrasAdjustable
2Automatic color change
3Sam
4Gemstone
5Twilight
6American
7Fat Tuesday
8Party
9Slow Color Splash
Table of Dynamic Mode 1 options for Miboxer LED controller

Figure 12: Dynamic Mode Table 1 (Default).

Dynamic Mode Table 2 (Manual Switch)

Number Dynamic Mode Brightness / Saturation / Speed
1Colors gradual changeAdjustable
2White light Gradual change
3RGB gradual change
4Seven colors jump to change
5Jump to change randomly
6Red light gradual change +Flash 3 times
7Green light gradual change +Flash 3 times
8Blue light gradual change +Flash 3 times
9White light gradual change +Flash 3 times
Table of Dynamic Mode 2 options for Miboxer LED controller

Figure 13: Dynamic Mode Table 2 (Manual Switch).

This section applies if you are using a DMX512 LED Transmitter (purchased separately) with the FUT039S controller.

DMX512 LED Transmitter Connection Diagram

Figure 14: DMX512 LED Transmitter Connection Diagram.

Linking:

  1. Choose the zone for the light by pressing "+" or "-" on the DMX512 control panel (e.g., "CH12" means zone 12).
  2. Switch off the light, wait for 10 seconds, then switch it on again.
  3. When the light is on, short press the "SET" button on the DMX512 control panel 3 times within 3 seconds.
  4. The light will blink 3 times slowly, indicating successful linking.

Unlinking:

  1. Switch off the light, wait for 10 seconds, then switch it on again.
  2. When the light is on, short press the "SET" button on the DMX512 control panel 5 times within 3 seconds.
  3. The light will blink 10 times quickly, indicating successful unlinking.

Note: If the link or unlink failed, please follow the above steps again.

4.9 Compatible Remote Controls (Purchased Separately)

The Miboxer LED controllers are compatible with a range of remote controls. Please ensure you purchase a compatible remote separately if not included.

Image showing various compatible Miboxer remote controls and gateways

Figure 15: Examples of compatible remote controls and gateways (FUT006, FUT007, B1/B1-B/T1, B2/T2, K1/K1-B, FUT087/FUT087-B, S1-B/S1-W/S1-G, WL-Box1, FUTD01).

5. Maintenance and Attention

  • Always verify that the voltage of your power supply matches the requirements of the LED light.
  • Ensure correct connection of both the cathode and anode to prevent damage to the light.
  • Never connect or disconnect wires with the power supply turned on. Only power on after all connections are secure and there is no short circuit.
  • Non-professional users should not attempt to dismantle the lighting fixtures directly.
  • Avoid using the controller in areas with large metal surfaces or strong electromagnetic waves, as this can severely affect the remote control distance and performance.

6. Troubleshooting

  • Light not responding to remote: Ensure the controller is correctly linked to the remote. If linking failed (light did not blink as expected), repeat the linking process. Check for strong electromagnetic interference or large metal objects nearby.
  • Light not turning on/off: Verify the power supply voltage is correct and all wiring connections (cathode and anode) are secure and correct. Ensure there are no short circuits.
  • "Do Not Disturb" mode behavior: If the light remains ON after a power cycle when "Do Not Disturb" mode was previously active, this is expected behavior. To fully deactivate the mode, follow the "Turn Off 'Do Not Disturb'" instructions.
  • Linking/Unlinking failure: If the light does not blink as described during the linking or unlinking process, repeat the steps carefully. Ensure the light is powered off for at least 10 seconds before attempting to link/unlink again.

7. User Tips

  • Easy Setup: Many users find the pairing and installation process to be straightforward and easy.
  • Broad Compatibility: The controllers are noted for their compatibility with a wide range of Miboxer remote control devices.
  • Smooth Transitions: The soft start feature provides a smooth and gradual illumination when turning on the lights.
  • Low Brightness Note: A very faint, high-pitched sound might be perceptible at very low brightness settings, though it is generally very subtle.

8. Frequently Asked Questions (FAQ)

Q: Does the controller work through a smartphone app, or only with a remote control?

A: The controller works with both a remote control and a smartphone app. However, for app control, an additional 2.4G gateway (such as the Miboxer WL-Box1) must be purchased separately.

9. Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For further detailed instructions and technical specifications, you may refer to the official user manual available in PDF format. View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.