NIDITON Shy Rabbit Silicone Tapping Light Clock

Contents

Shy Rabbit Silicone Tapping Light Clock User Manual

Brand: NIDITON | Model: Shy Rabbit Silicone Tapping Light Clock

Introduction

This manual provides comprehensive instructions for the NIDITON Shy Rabbit Silicone Tapping Light Clock. This multifunctional device combines an alarm clock, night light, and temperature display, designed with a cute bunny aesthetic, making it ideal for children's rooms, nurseries, or as a decorative desktop item. It features a soft, dimmable, and color-changing light, dual alarms, and a rechargeable battery for portability.

White bunny alarm clock with time 22:18 displayed.

Figure 1: Shy Rabbit Silicone Tapping Light Clock (White variant)

Safety Warnings

  • Ensure to use a compatible 5V DC adapter for charging. Adapters are not included.
  • Keep the device away from water or excessive moisture to prevent electrical hazards.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
  • Keep out of reach of very young children if small parts could pose a choking hazard, although the design is child-safe.

Package Contents

Please check the box for the following items:

  • 1 x Night Lamp (Shy Rabbit Silicone Tapping Light Clock)
  • 1 x User Manual
  • 1 x Power Supply Cable (USB)

Product Overview and Key Diagram

Familiarize yourself with the device's components and controls:

Back view of the bunny alarm clock showing control buttons and ports: Timing, °C/°F, Knob, Reset, Alarm, Mode, DC 5V.

Figure 2: Rear view of the alarm clock with labeled controls.

  • Timing Button: For setting timed light-off functions.
  • °C/°F Button: To switch between Celsius and Fahrenheit temperature display.
  • Knob: For adjusting values (time, date, brightness) and confirming selections.
  • Reset Button: To reset the device.
  • Alarm Button: For setting and managing alarms.
  • Mode Button: To switch between different display modes (time, date, night mode).
  • DC 5V Port: For charging the device.

Initial Setup

Charging the Device

Before first use, fully charge the device. Connect the provided USB power supply cable to the DC 5V port on the back of the alarm clock and plug the other end into a compatible 5V DC adapter (not included) or a USB power source.

Power-On Sequence

Upon powering on, the LED display will show a full display for approximately 2 seconds, then enter normal clock mode. The default display will be 2022.1.1, PM12:00, with temperature in Celsius.

Operating Instructions

1. Time Mode Settings

  1. Press and hold the Knob for 3 seconds. The '12/24' indicator will flash.
  2. Rotate the Knob to select between 12-hour or 24-hour format.
  3. Press the Knob to confirm. The hour display will flash.
  4. Rotate the Knob to adjust the hour. Press the Knob to confirm. The minute display will flash.
  5. Rotate the Knob to adjust the minute. Press the Knob to confirm and exit time setting.

2. Date Mode Settings

  1. From time mode, press the Mode button once to enter Date Mode.
  2. Press and hold the Knob for 3 seconds. The '2022' (year) will flash.
  3. Rotate the Knob to adjust the year. Press the Knob to confirm.
  4. The 'MM' (month) will flash. Rotate the Knob to adjust the month. Press the Knob to confirm.
  5. The 'DD' (day) will flash. Rotate the Knob to adjust the day. Press the Knob to confirm and return to date mode.

3. Night Mode (Default OFF)

  1. From time mode, press the Mode button twice to enter Night Mode setting.
  2. The hour display for the end of night time will flash. Rotate the Knob to adjust the hour. Press the Knob to confirm.
  3. The minute display will flash. Rotate the Knob to adjust the minute. Press the Knob to confirm.
  4. The device will now display 'ON' for Night Mode.

4. Alarm Settings (2 Sets)

  1. Press and hold the Alarm button for 3 seconds to enter AL1 setting. 'AL1' will light up.
  2. The hour display will flash. Rotate the Knob to adjust the hour. Press the Knob to confirm.
  3. The minute display will flash. Rotate the Knob to adjust the minute. Press the Knob to confirm.
  4. The 'Daily Step Setting' will flash. Rotate the Knob to adjust the desired alarm days (e.g., weekdays, weekends, daily). Press the Knob to confirm and return to AL1 delay mode.
  5. To set AL2, repeat the process.
Image showing two bunny alarm clocks, one with a bright yellow light and the other with a pink light, illustrating the ability to set two alarm times.

Figure 3: The alarm clock supports setting two distinct alarm times.

5. Alarm ON/OFF

  1. Press the Alarm button once to display 'AL1'. Rotate the Knob to toggle AL1 ON or OFF.
  2. Press the Alarm button again to display 'AL2'. Rotate the Knob to toggle AL2 ON or OFF.
  3. When an alarm is active, 'AL1' or 'AL2' will light up on the display.
  4. Press the Alarm button again to return to the 12/24 clock time settings.
Image showing a person covering their ears due to a loud alarm, with a diagram illustrating 5 levels of volume adjustment from 50 dBA to 105 dBA.

Figure 4: Alarm volume can be adjusted across 5 levels, from 50 dBA to 105 dBA.

6. Temperature Mode

In time mode, press the °C/°F button to switch the temperature display between Celsius (°C) and Fahrenheit (°F). The normal measurement range is -10°C to 50°C (14°F to 122°F).

Two bunny alarm clocks, one displaying 27°C and the other 81°F, demonstrating temperature display.

Figure 5: The clock can display temperature in both Celsius and Fahrenheit.

7. Cyclic Display Mode

To activate cyclic display (alternating time and temperature):

  1. Press and hold the °C/°F button.
  2. Rotate the Knob to switch to loop display mode. (Default is off when powered on).
  3. In this mode, time will display for 10 seconds, then temperature for 3 seconds.
  4. To exit, press the °C/°F button again. The display will show 'HO' and exit loop display mode.

8. Constant Light Mode and Power-Saving Mode

The device supports two display modes for the LED screen:

  • Power-Saving Mode: Press the Mode button for 3 seconds. The display will show 'ECO'. In this mode, the screen will turn off after 60 seconds of inactivity.
  • Constant On Mode: The display will show 'AOd'. In this mode, the screen remains on continuously.

9. Timed Light Off Function

To set a timer for the night light to automatically turn off:

  • Press the Timing button once: Light will stay on for 10 minutes.
  • Press the Timing button twice: Light will stay on for 20 minutes.
  • Press the Timing button three times: Light will stay on for 30 minutes.
  • Press the Timing button four times: Exit the timed light off function and return to time mode.
Image showing a mother breastfeeding a baby with the bunny alarm clock on a table, illustrating the 10/20/30 minute timer for automatic light turn-off.

Figure 6: The timed light-off function is useful for activities like breastfeeding.

10. Brightness Adjustment Mode

In the non-setting state, rotate the Knob to adjust the brightness of the LED display.

11. Snooze Function

When an alarm sounds, the device will emit a "beep beep" sound, and the alarm symbol will flash. The RGB color atmosphere light will also activate. To activate snooze, press any button (except tapping the silicone). The alarm symbol will continue to flash. To exit snooze during the snooze period, press any button (except tapping the silicone). If no button is pressed, the alarm will sound for 1 minute and then stop. The alarm symbol will remain on the display.

12. Tapping Light

In non-setting and alarm mode, you can tap the silicone body of the bunny to control the night light:

  • 1st Tap: Warm white light.
  • 2nd Tap: Warm yellow light.
  • 3rd Tap: White light.
  • 4th Tap: RGB illusion gradient (for 3 seconds).
  • 5th Tap: The light color stays at the current tapped color.
  • 6th Tap: Light turns off.

The cycle repeats. If the power is not turned off, the device has a memory function for the last light setting.

Image showing a hand tapping the bunny alarm clock to switch colors, and another hand vibrating it to switch colors, with multiple color options displayed below (natural, warm, white, neon, off).

Figure 7: Tapping or vibrating the silicone body changes the light color and mode.

Video 1: Demonstration of the color-changing night light feature.

User Tips

  • The timed light-off feature is highly appreciated for children falling asleep or for parents during nighttime feedings.
  • The adjustable lighting intensity makes it versatile for various uses, from a bright night light to a dim bedside companion.
  • While compact, the design is noted to be very appealing and functional.

Maintenance

The device is made from child-safe, food-grade silicone and eco-friendly ABS, making it soft and washable. To clean, gently wipe the silicone lampshade and the base with a damp cloth. Do not immerse the device in water. Avoid using harsh chemicals or abrasive cleaners.

Troubleshooting

  • Settings Exit Automatically: If no button is pressed for 10 seconds during any setting mode, the device will automatically exit the settings and return to the preset mode. This is normal behavior.
  • Device Not Turning On: Ensure the device is fully charged. Connect it to a power source and allow it to charge for at least 2-3 hours.
  • Light Not Responding to Taps: Ensure the device is not in a setting mode. If the power was turned off, the memory function might reset; try cycling through the tap modes again.
  • Alarm Not Sounding: Verify that the alarm is set to ON (AL1 or AL2 indicator is lit) and the volume is not set to minimum.

Specifications

Feature Specification
Type Alarm Clocks
Motivity Type Digital
Screen Type LED
Material Plastic (Silicone lampshade)
Form Single Face
Shape Geometric
Function Mood Light, Alarm, Temperature Display
Feature LUMINOVA, Dimmable, Color-changing
Battery Included Yes (1200mAh USB rechargeable)
Is Smart Device No
Length 110 mm
Width 110 mm
Diameter 110 mm
Weight 160 g
Temperature Range -10°C to 50°C (14°F to 122°F)
Origin Mainland China

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.