AI-Thinker BU03-Kit

Contents

UWB Indoor Bidirectional Ranging and Positioning Module BU03 Development Board User Manual

Model: BU03-Kit | Brand: AI-Thinker

1. Introduction

The AI-Thinker BU03-Kit is a versatile Ultra-Wideband (UWB) development board designed for high-precision indoor ranging and positioning applications. Based on the BU03 UWB module and an STM32 microcontroller, it integrates an onboard antenna, RF circuitry, and power management. This manual provides essential information for setting up, operating, and maintaining your BU03-Kit, enabling you to leverage its capabilities for various projects requiring accurate location data.

Front and back view of the BU03-Kit UWB development board.
Figure 1: BU03-Kit Development Board (Front and Back)

2. Product Overview

The BU03-Kit is developed by Shenzhen Anxin Technology Co., Ltd. It is engineered to support bidirectional ranging and positioning, utilizing both Two-Way Ranging (TWR) and Phase Difference of Arrival (PDOA) algorithms. It achieves a high positioning accuracy of up to 10 centimeters and supports data rates up to 6.8 Mbps. The board is suitable for a wide range of applications including Internet of Things (IoT), mobile devices, wearable technology, and smart home systems.

Key features of the BU03-Kit, including UWB indoor positioning, bidirectional ranging, TWR and PDOA algorithm support, 10cm high-precision positioning, and configurable display screen for data.
Figure 2: BU03-Kit Key Features
Product overview detailing the BU03-Kit as a UWB development board based on the BU03 module with an STM32 microcontroller, integrated antenna, RF circuit, and power management.
Figure 3: BU03-Kit Product Description

3. Specifications

ParameterValue
ModelBU03-Kit
PackageDIP-40
Size35.56 * 55.00 (±0.2) mm
Module Antenna TypeOnboard Ceramic Antenna
Center Frequency PointCH5 (6489.5MHz), CH9 (7987.2MHz)
Operating Temperature-40°C ~ 85°C
Storage Environment-40°C ~ 125°C, <90%RH
Power Supply RangeUSB Type-C or pin header 3.3V or 5V. Supply current ≥ 500mA
Supported InterfacesUART, I2C, SPI
Available IO Quantity20
Table of product parameters for the BU03-Kit, including model, package, size, antenna type, center frequency, operating/storage temperature, power supply, supported interfaces, and available IOs.
Figure 4: BU03-Kit Product Parameters

Module Power Consumption

ModeMinAvgMaxUnit
CH5 Transmit, Rate 0.85Mbps-17.03-mA
CH5 Transmit, Rate 6.81Mbps-15.06-mA
CH9 Transmit, Rate 0.85Mbps-24.85-mA
CH9 Transmit, Rate 6.81Mbps-22.6-mA
CH5 Receive, Rate 0.85Mbps-39.81-mA
CH5 Receive, Rate 6.81Mbps-40.01-mA
CH9 Receive, Rate 0.85Mbps-49.23-mA
CH9 Receive, Rate 6.81Mbps-48.05-mA
Startup Instantaneous Current-174-mA
Deep Sleep-179-nA

Note: The following power consumption data is measured based on a 3.3V power supply and an ambient temperature of 25°C.

Table showing the power consumption of the BU03 module in various modes (transmit, receive, startup, deep sleep) at different data rates and frequencies.
Figure 5: Module Power Consumption

Dimensions

Dimension diagram of the BU03-Kit development board, showing its length, width, and height measurements.
Figure 6: BU03-Kit Dimension Diagram

4. Pin Definitions

The BU03-Kit development board features 40 pin headers. The pin functions are defined as follows:

Pin No.NameFunction Description
1PB12PB12, SPI2_NSS/I2C2_SMBAI/USART3_CK/TIM1_BKIN
2PB13PB13, SPI2_SCK/USART3_CTS/TIM1_CH1N
3PB14PB14, SPI2_MISO/USART3_RTSTIM1_CH2N
4PB15PB15, SPI2_MOSI/TIM1_CH3N
5EXTONEXTON_PA8
6TX1UART1_TX
7RX1UART1_RX
8WAKEUPPA0WKUP, PA0_WKUP/USART2_CTS(9)/ADC12_IN0/TIM2_CH1_ETR
9LED_RUNPA1_LED_RUN
10PA15JTDI, TIM2_CH1_ETR/PA15/SPI1_NSS
11PA3PA3, USART2_RX/ADC12_IN3/TIM2_CH4
12PB4JNTRST, TIM3_CH1/PB4/SPI1_MISO
13PB8PB8, TIM4_CH3, I2C1_SCL/CANRX
14PB9PB9, TIM4_CH4, I2C1_SDA/CANTX
15V-BATV-BAT
16GNDGND
17SWDIOSWDIO
18SWCLKSWCLK
193V33V3 Power Supply
205V5V Power Supply
213V33V3 Power Supply
22GNDGND
23PC13PC13-TAMPER-RTC, PC13, TAMPER-RTC
24NRSTNRST
25I2C1_SCLI2C1_SCL/PB7
26I2C1_SDAI2C1_SDA/PB7
27DW_RSTNRSTN
28I2C3_SDAPB11, I2C2_SDA/USART3_RX, TIM2_CH4
29I2C2_SCLPB10, I2C2_SCL/USART3_TX, TIM2_CH3
30PA2PA2, USART2_TX/ADC12_IN2/TIM2_CH3
31PA3PA3, USART2_RX/ADC12_IN3/TIM2_CH4
32SPI1_CSNSPI1_CSN
33SPI1_MOSISPI1_MOSI
34SPI1_MISOSPI1_MISO
35SPI1_CLKSPI1_CLK
36DW_IRQDW_IRQ/GPIO8
37IO4IO4/EXTPA
38IO5IO5/EXTTXE/SPIPOL
39IO6IO6/EXTRXE/SPIPHA
40IO7DW_SYNC
Table defining the pin functions for the BU03-Kit development board, including PB12, PB13, PB14, PB15, EXTON, TX1, RX1, WAKEUP.
Figure 7: BU03-Kit Pin Definitions (Part 1)
Continuation of the pin definition table for the BU03-Kit, listing pins from 9 to 40 and their functions.
Figure 8: BU03-Kit Pin Definitions (Part 2)

5. Buttons and Indicator Lights

The BU03-Kit features several buttons and indicator lights to provide visual feedback and control. Refer to the diagram below for their locations and functions:

  1. POWER Indicator Light: Red light, illuminates when powered on.
  2. RUN Indicator Light: Illuminates steadily after successful operation.
  3. UWBTX Communication Indicator Light 1: Flashes when data is transmitted.
  4. UWBRX Communication Indicator Light 2: Flashes when data is received.
  5. Undefined Function LED.
  6. Undefined Function LED.
  7. Pin Header, STM32 Serial Port BOOT Control.
  8. BOOT Control Button.
  9. RESET Button.
  10. Positioning Ranging Data Interface.
  11. Serial Port: Supports burning and AT command interaction.

Note: The development board comes with a jumper cap. BOOT1 and BOOT0 are pulled low by default. Pressing the button and the jumper cap jumping to high level have the same effect, controlling the serial port burning.

Diagram illustrating the buttons and indicator lights on the BU03-Kit development board.
Figure 9: Buttons and Indicator Lights Description

6. Setup

To begin using your BU03-Kit development board, follow these general setup steps:

  1. Power Supply: Connect the BU03-Kit to a power source using a Type-C USB cable or by supplying 3.3V or 5V via the pin headers. Ensure the power supply can provide at least 500mA.
  2. Driver Installation: Depending on your operating system, you may need to install specific USB-to-serial drivers for the board to be recognized. Refer to the official AI-Thinker documentation or community resources for driver downloads.
  3. Development Environment: Set up your preferred development environment (e.g., Keil, IAR, or a custom IDE) and ensure the necessary toolchains for STM32 microcontrollers are installed.
  4. Firmware Upload: Use the serial port (UART) and BOOT control pins/button to upload your desired firmware to the STM32 microcontroller. Consult the programming guide for detailed instructions on entering bootloader mode and flashing firmware.
  5. Peripheral Connections: If using external peripherals (e.g., display screens, sensors), connect them to the appropriate I2C, SPI, or UART interfaces as per your project requirements.

7. Operation

Operating the BU03-Kit involves programming the STM32 microcontroller to utilize the UWB module for ranging and positioning tasks. The board supports both TWR (Two-Way Ranging) and PDOA (Phase Difference of Arrival) algorithms.

  1. TWR Ranging: Implement the TWR algorithm in your firmware to measure distances between two UWB modules. This typically involves sending and receiving UWB packets and calculating the time-of-flight.
  2. PDOA Positioning: For more advanced positioning, especially in multi-anchor setups, utilize the PDOA algorithm. This requires multiple UWB anchors and a tag, where the phase difference of received signals is used to determine the tag's position.
  3. Data Output: Positioning and ranging data can be accessed via the serial port or other configured interfaces. If your kit includes a display screen, data can be viewed directly on it.
  4. AT Command Interaction: The serial port also supports AT command interaction for configuring the UWB module's parameters, such as transmit power, channel, and data rate.

8. Application Scenarios

The BU03-Kit is suitable for a variety of high-precision indoor positioning and ranging applications:

  • Warehouse Logistics: Precise tracking and management of goods and handling equipment to improve efficiency and accuracy, reducing loss and misplacement.
  • Indoor Positioning and Navigation: Guiding users to specific locations in large venues like shopping malls, museums, and libraries, or for indoor store navigation and exhibition guidance.
  • Parking Management: Accurate vehicle positioning and guidance to help drivers quickly find empty parking spaces, improving parking lot utilization and management, and enabling automatic billing.
  • Hospital Management: Positioning medical staff, patients, and equipment to optimize workflow, improve medical service quality and efficiency. In emergencies, quickly locate relevant personnel and devices.
  • Elderly and Child Monitoring: Wearable UWB modules for real-time monitoring of location and activity, preventing loss or accidents, such as understanding the location and health status of the elderly in nursing homes.
  • Tunnel Traffic: Real-time positioning and tracking of personnel and vehicles in tunnels, providing hazard warnings and emergency rescue location information, and facilitating equipment scheduling and collaborative operations.
Visual representation of various application scenarios for the UWB module, such as warehouse logistics, indoor navigation, parking, hospital management, elderly/child monitoring, and tunnel traffic.
Figure 10: BU03-Kit Application Scenarios

9. Maintenance

Proper maintenance ensures the longevity and reliable operation of your BU03-Kit development board:

  • Handle with Care: Avoid dropping or subjecting the board to physical shock.
  • Static Discharge: Always handle the board in a static-safe environment to prevent damage to sensitive electronic components.
  • Cleanliness: Keep the board free from dust, dirt, and moisture. Use a soft, dry brush or compressed air for cleaning. Avoid using liquids.
  • Storage: When not in use, store the board in an anti-static bag in a cool, dry place within the specified storage temperature and humidity ranges (-40°C ~ 125°C, <90%RH).
  • Power Supply: Always use a stable and appropriate power supply (3.3V or 5V, ≥500mA) to prevent damage from overvoltage or undervoltage.

10. Troubleshooting

If you encounter issues with your BU03-Kit, consider the following troubleshooting steps:

  • No Power Indicator: Check your USB Type-C cable and power source. Ensure the power supply meets the voltage and current requirements.
  • Board Not Recognized by PC: Verify that the correct USB-to-serial drivers are installed. Try a different USB port or cable.
  • Firmware Upload Failure: Ensure the board is in bootloader mode (check BOOT control pin/button). Verify your development environment settings and cable connections.
  • No Ranging/Positioning Data: Double-check your UWB module configuration (channel, data rate, transmit power). Ensure all modules in your setup are powered and communicating correctly. Verify antenna connections if applicable.
  • Inaccurate Positioning: Calibrate your UWB system according to the specific algorithm (TWR/PDOA) and environment. Ensure clear line-of-sight between modules where required.
  • Communication Issues: Check serial port settings (baud rate, parity, stop bits). Ensure no conflicts with other peripherals on I2C or SPI.

11. User Tips

  • Understand Package Differences: The BU03-Kit is available in different packages. The base 'type1' is the development board itself. Other types (e.g., 'type2' PDOA Follow-up Package, 'type3' TWR Distance Measurement Package, 'type4' TWR Positioning Package) include additional components like the BU04-Kit, Type-C data cables, and 0.96-inch display screens. Ensure you have the correct package for your intended application.
  • Start with Examples: If you are new to UWB or STM32 development, begin with simple example code provided by AI-Thinker or the community to familiarize yourself with the basic functionalities before implementing complex applications.
  • Community Support: Engage with online forums and communities dedicated to UWB technology or STM32 development. Many common issues and solutions are often shared there.
  • Environmental Considerations: UWB performance can be affected by the environment. Test your setup in the actual deployment environment to optimize accuracy and reliability.

12. Package Contents

The standard BU03-Kit package typically includes:

  • 1x BU03-Kit Development Board

Other packages may include additional items. For example, the PDOA Follow-up Package includes:

  • 1x BU03-Kit
  • 1x BU04-Kit
  • 2x Type-C Data Cables
  • 2x 0.96-inch Display Screens (shipped with screws and copper pillars)

Data information can be viewed intuitively through the display screen if included in your package.

Contents of the PDOA Follow-up Package, showing BU03-Kit, BU04-Kit, Type-C data cables, and 0.96-inch display screens.
Figure 11: PDOA Follow-up Package Contents

13. Warranty and Support

For specific warranty information and technical support, please refer to the official AI-Thinker website or contact your vendor. Keep your purchase records for any warranty claims. Online resources, community forums, and documentation are often available to assist with development and troubleshooting.

© 2023 AI-Thinker. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.