STEPPERONLINE 3-17HE15-1504S

Contents

STEPPERONLINE Nema 17 Stepper Motor (Model 3-17HE15-1504S)

Instruction Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your STEPPERONLINE Nema 17 Stepper Motor, model 3-17HE15-1504S. This high-quality, low-noise, and stable performance stepper motor is ideal for various applications including 3D printers, CNC machines, and robotics.

Nema 17 Stepper Motor highlighting high quality, low noise, and stable performance

Figure 1: Nema 17 Stepper Motor features

2. Package Contents

Upon opening the package, please verify that all items are present and undamaged:

  • Nema 17 Stepper Motor (Model 3-17HE15-1504S)
  • 1-meter 4-lead connecting cable

Video 1: Product unboxing and overview of the Nema 17 Stepper Motor and cable.

Three Nema 17 stepper motors and a 4-lead cable with Dupont connector

Figure 2: Contents of the Nema 17 Stepper Motor package.

3. Specifications

The following table details the electrical and mechanical specifications of the 3-17HE15-1504S Nema 17 Stepper Motor:

Parameter Value
Model Number3-17HE15-1504S
Phase Number2
Step Angle1.8 degrees
Holding Torque42 Ncm (59.49 oz.in)
Rated Current / Phase1.5A
Phase Resistance2.3 ohms ± 10%
Inductance4.0 mH ± 20% (1KHz)
Number of Leads4
Rotor Inertia57 g.cm²
Shaft Diameter5mm (D-cut)
Body Length38mm
Motor Weight280g
Wire Length1000mm (1m)
Ambient Temperature-10°C to 50°C (14°F to 122°F)
Insulation ClassB 130°C (266°F)
Temperature RiseMax 80°C
Step Accuracy±5.00% (non-accumulative)
Dynamic Axial Load10N MAX
Dynamic Radial Load @ Shaft Length 20mm21N MAX
Table of specifications for the Nema 17 stepper motor alongside an image of the motor.

Figure 3: Detailed specifications of the Nema 17 Stepper Motor.

Technical drawing showing dimensions of the Nema 17 stepper motor, including body length 38mm and shaft diameter 5mm.

Figure 4: Physical dimensions of the Nema 17 Stepper Motor.

4. Setup and Installation

4.1. Wiring Connection

The motor comes with a 4-lead cable for bipolar connection. Ensure correct wiring to your stepper motor driver. Incorrect wiring can damage the motor or driver.

Pin No. Lead Color Winding
1BLK (Black)A+
2BLU (Blue)A-
3GRN (Green)B+
4RED (Red)B-
Wiring diagram showing the connection of the 4-lead stepper motor to a driver, with colors Black (A+), Blue (A-), Green (B+), Red (B-).

Figure 5: Stepper Motor Wiring Diagram.

4.2. Mounting

Mount the stepper motor securely using the four M3 mounting holes on the front face. Ensure the motor is firmly attached to prevent vibrations and ensure accurate movement. The motor's body dimensions are 42mm x 42mm, with a body length of 38mm.

5. Operating Instructions

Stepper motors operate by converting digital pulses into discrete mechanical movements. Each pulse from the driver moves the motor by a specific step angle (1.8 degrees for this model).

  1. Connect to a Stepper Driver: Ensure your stepper motor driver is compatible with the motor's current rating (1.5A per phase).
  2. Power Supply: Provide a stable DC power supply to your stepper driver. The voltage should be appropriate for your driver and application.
  3. Control Signals: Send step and direction signals from your microcontroller (e.g., Arduino, Raspberry Pi) or CNC controller to the stepper driver.
  4. Microstepping: Utilize microstepping features on your driver for smoother operation and reduced vibration, especially at lower speeds.

6. Maintenance

Stepper motors are generally low-maintenance devices. Follow these guidelines to ensure longevity:

  • Keep Clean: Regularly clean the motor's exterior to prevent dust and debris buildup, which can affect heat dissipation.
  • Avoid Overheating: Ensure adequate ventilation around the motor, especially during prolonged operation at high currents. The maximum temperature rise is 80°C.
  • Shaft Protection: Avoid applying excessive axial or radial loads to the motor shaft beyond specified limits (10N axial, 21N radial).
  • Storage: Store the motor in a dry, dust-free environment within the specified ambient temperature range (-10°C to 50°C).

7. Troubleshooting

If you encounter issues with your stepper motor, consider the following common problems and solutions:

  • Motor Not Moving:
    • Check power supply to the driver.
    • Verify wiring connections (refer to Section 4.1).
    • Ensure step and direction signals are being sent correctly.
    • Confirm the driver is enabled.
  • Erratic Movement or Skipping Steps:
    • Reduce motor speed or acceleration settings.
    • Increase motor current (if within safe limits for the motor and driver).
    • Check for mechanical binding or excessive load on the shaft.
    • Ensure proper heat dissipation; overheating can cause performance issues.
  • Motor Overheating:
    • Reduce the motor current setting on the driver.
    • Improve ventilation or add a heatsink.
    • Check for continuous high-load operation.

8. User Tips

  • Driver Matching: Always use a stepper motor driver that can supply the rated current (1.5A) to maximize torque and performance.
  • Vibration Damping: For applications requiring very smooth motion or low noise, consider using vibration damping materials between the motor and its mounting surface.
  • Cable Management: Secure motor cables to prevent them from snagging or interfering with moving parts, especially in CNC or 3D printer setups.
  • Testing: Before full deployment, test the motor with light loads to verify correct wiring and driver settings.

9. Certifications

This STEPPERONLINE Nema 17 Stepper Motor is certified to meet international standards:

  • CE Certified: Complies with European health, safety, and environmental protection standards.
  • RoHS Compliant: Restricts the use of hazardous substances in electrical and electronic products.
  • ISO9001: Manufactured under a quality management system certified to ISO9001 standards.
Certificates of Compliance and Conformity for CE and ISO9001 standards.

Figure 6: Product Certifications.

10. Warranty and Support

This STEPPERONLINE Nema 17 Stepper Motor comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact STEPPERONLINE Official Store directly.

For more detailed technical information, advanced guides, and comprehensive documentation, please refer to the official User Manual PDF:

Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.