1. Introduction
Thank you for choosing the E-ACE B56P Dashcam. This device is designed to provide high-quality video recording for your vehicle, enhancing driving safety and providing crucial evidence in case of incidents. Featuring 4K Ultra HD recording, GPS tracking, Wi-Fi connectivity, and advanced parking monitoring, the B56P offers a comprehensive solution for your in-car surveillance needs. This manual will guide you through the installation, operation, and maintenance of your dashcam.

2. Specifications
| Feature | Specification |
|---|---|
| Model Number | B56P |
| Installation Type | Portable Recorder (Hidden Type) |
| Chipset | Novatek 96670 |
| Imaging Sensor | Sony IMX415 |
| Camera Lens | Front: 6 Glass, 170° Angle, F1.6 Aperture Rear (Optional): 4 Glass, 140° Angle, F2.0 Aperture |
| Video Resolution | Front: 3840x2160@25FPS (4K UHD) Rear (Optional): 1920x1080P@25FPS |
| Pixels | 800 Mega |
| Maximum Video Frame Rate | 25 FPS |
| Video Code | H.264 |
| Video Format | MPEG-4, TS |
| Display | 1.47 Inch OLED screen |
| OSD Languages | English, Russian, Dutch, French, Spanish, Portuguese, Italian, Chinese, Japanese, Korean, Polish, Thai, Vietnamese, etc. |
| Memory Card | Micro SD Card, Class 10, 16GB to 256GB (Not included) |
| Working Temperature | -20℃ to 70℃ |
| Power Source | Corded Electric (12V compatible) |
| Built-in Screen | Yes |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| NightShot Function | Yes |
| Rear Camera | Yes (Optional) |
| Touch Screen | No |
| GPS Logger | External |
| Interface | AV-In, USB 2.0, Micro SD/TF |

3. Package Contents
The contents of your package may vary depending on the specific variant purchased:
3.1. Only Front Lens-B56P Variant
- 1 x 4K Dashcam (B56P)
- 1 x Original Power Charger with GPS
- 1 x User Manual
- 1 x USB Card Reader (Gift)
- 1 x Electrostatic Sticker

3.2. B56P-6M RC Variant (with Rear Camera)
- All items from 'Only Front Lens-B56P' variant, PLUS:
- 1 x Sony 1080P Rearview Camera with 6 Meters Cable

3.3. B56P-6M RC-KIT Variant (with Rear Camera & Hardwire Kit)
- All items from 'B56P-6M RC' variant, PLUS:
- 1 x Hardwire Kit for 24H Parking Monitoring

4. Setup
4.1. Memory Card Installation
- Ensure the dashcam is powered off.
- Locate the Micro SD card slot on the dashcam (refer to Figure 2).
- Insert a Class 10 Micro SD card (16GB to 256GB recommended) into the slot until it clicks into place.
- To remove, gently push the card in until it springs out.
4.2. Dashcam Mounting
- Clean the area on your windshield where you intend to mount the dashcam.
- Attach the electrostatic sticker to the windshield first, then mount the dashcam to the sticker for easier removal and repositioning.
- Ensure the dashcam's view is unobstructed and centered.
4.3. Power Connection
The dashcam requires a 12V power supply. Using a 24V power supply will damage the motherboard.
Standard Car Charger Connection:
- Connect the provided car charger to the dashcam's Type-C port.
- Plug the other end of the car charger into your vehicle's cigarette lighter socket.
Hardwire Kit Connection (for 24H Parking Monitoring - Optional):
The Hardwire Kit allows the dashcam to draw power directly from your car's fuse box, enabling 24-hour parking monitoring without occupying the cigarette lighter interface. This installation requires basic knowledge of vehicle electrical systems.
- Identify two fuse slots in your vehicle's fuse box:
- A fuse slot that provides constant power (for the RED wire).
- A fuse slot that provides power only when the ignition is in the ACC position (for the YELLOW wire).
- Connect the RED wire of the Hardwire Kit to the constant power fuse slot.
- Connect the YELLOW wire of the Hardwire Kit to the ACC power fuse slot.
- Connect the BLACK wire of the Hardwire Kit to a grounding screw or bolt on the vehicle's chassis.

4.4. Rear Camera Connection (Optional)
- Connect the rear camera cable to the designated AV-In port on the dashcam.
- Route the cable neatly along the vehicle's interior to the rear of the car.
- Mount the rear camera in a suitable location, typically on the rear windshield, ensuring a clear view.
4.5. GPS Module Connection
- Connect the external GPS module to the dashcam.
- Upon first connection, the GPS module will attempt to locate satellites. The GPS icon on the dashcam screen will change from red to green once positioning is successful. This may take a few minutes.

5. Operating Instructions
5.1. Power On/Off
Long press the power on/off button (refer to Figure 2) to turn the dashcam on or off. The device will automatically power on and begin recording when connected to a power source and the vehicle ignition is on.
5.2. Display Modes
The 1.47-inch OLED screen offers four display modes. Short press the power button to cycle through these modes:
- Front View: Displays the live feed from the front camera.
- Rear View: Displays the live feed from the rear camera (if installed).
- Standby: Shows date, time, and recording status.
- App QR Code: Displays a QR code for quick access to the companion app.

5.3. Recording
The dashcam automatically starts recording in 4K (front) and 1080P (rear, if installed) when powered on. Recordings are saved to the Micro SD card.

5.4. Loop Recording
When the memory card is full, the dashcam will automatically overwrite the oldest unprotected files. Videos protected by the G-Sensor or Parking Monitor will not be overwritten.
5.5. G-Sensor
The built-in G-Sensor detects sudden impacts or collisions. When triggered, it automatically locks the current video segment to prevent it from being overwritten, ensuring critical footage is preserved.
5.6. Parking Monitor
With the optional Hardwire Kit installed, the Parking Monitor feature provides 24-hour surveillance. If an impact is detected while the vehicle is parked and the engine is off, the dashcam will automatically turn on and record a short video, then power off.
5.7. Super Night Vision & WDR
The dashcam features Super Night Vision and Wide Dynamic Range (WDR) technology to enhance video clarity in low-light conditions and balance exposure in scenes with high contrast, ensuring clear recordings day and night.

5.8. WIFI Control (Viidure App)
Download the "Viidure" app from the App Store (iOS) or Google Play Store (Android). Connect your smartphone to the dashcam's Wi-Fi network to access various functions:
- Take Photos
- Watch Live Video Feed
- Replay Recorded Videos
- Control Dashcam Settings
- Download Video Files to your phone

5.9. GPS Tracking
The external GPS module accurately logs your vehicle's location, speed, latitude, longitude, and route. This data can be viewed through the "Viidure" mobile app or a compatible GPS player application on a computer.

6. Maintenance
6.1. Cleaning
- Gently wipe the camera lenses and screen with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners or solvents, as they may damage the device.
6.2. Memory Card Management
- Regularly format the Micro SD card (e.g., once a month) to maintain optimal performance and prevent data corruption.
- Before formatting, ensure you back up any important video footage to your computer or smartphone.
7. Troubleshooting
7.1. Dashcam not powering on
- Ensure the power cable is securely connected to both the dashcam and the power source.
- Verify that your vehicle provides a 12V power supply. This DVR is not compatible with 24V systems, which can cause damage.
- If using the Hardwire Kit, check that the RED, YELLOW, and BLACK wires are correctly connected to their respective fuse slots and ground.
7.2. Video recording issues (e.g., freezing, corrupted files)
- Ensure you are using a high-quality Class 10 Micro SD card (16GB-256GB). Lower quality or slower cards may not support 4K recording.
- Format the Micro SD card regularly to resolve potential data corruption issues.
7.3. Rear camera not working
- Verify that the rear camera cable is securely connected to the dashcam's AV-In port.
- Ensure you are using an original E-ACE rear camera for guaranteed compatibility. Third-party cameras may not function correctly.
7.4. GPS not tracking
- Confirm that the external GPS module is properly connected to the dashcam.
- Allow sufficient time (a few minutes) for the GPS module to acquire satellite signals. The GPS icon on the screen should turn green when successfully positioned.
- Ensure the GPS module has a clear view of the sky, free from obstructions.
8. User Tips
- 24-Hour Parking Monitoring: For continuous parking surveillance, ensure the optional Hardwire Kit is installed correctly. This allows the dashcam to monitor impacts even when the vehicle is off, providing crucial evidence for parking incidents.
- Memory Card Health: To prevent recording issues and extend the lifespan of your Micro SD card, regularly back up important footage and format your card every few weeks. This helps maintain card health and free up space.
- App Connectivity: If you experience issues connecting to the dashcam's Wi-Fi via the "Viidure" app, try restarting both the dashcam and your phone's Wi-Fi. Ensure you are within close range of the dashcam for a stable connection.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information and warranty terms.