1. Introduction
Thank you for choosing the DK-iG-10Mini Electric Guitar Amplifier. This compact and portable amplifier is designed to provide a versatile practice and performance experience for guitarists. Featuring two channels (Clean and Distortion), Bluetooth connectivity, an AUX input, and a built-in rechargeable battery, the iG-10Mini offers convenience and quality sound in a small package. Please read this manual thoroughly to understand how to operate your amplifier safely and effectively.
2. Package Contents
Please check the box for the following items:
- DK-iG-10Mini Electric Guitar Amplifier
- USB Type-C Charging Cable
- User Manual
3. Product Overview
Familiarize yourself with the controls and connections of your DK-iG-10Mini amplifier.
Front Panel Controls
- INPUT (6.35mm Jack): Connect your electric guitar here.
- VOLUME (Input): Adjusts the input volume of your guitar. Turn counter-clockwise to turn the amplifier OFF.
- POWER / OVERDRIVE / CLEAN Switch: Toggles between amplifier ON/OFF and selects between Clean and Overdrive (Distortion) channels.
- GAIN: Controls the amount of distortion or overdrive in the signal.
- TONE: Adjusts the tonal characteristics (treble/bass balance) of your sound.
- REVERB / B.T.: Controls the reverb effect. Press and hold to activate Bluetooth pairing mode.
Rear Panel Connections
- Type-C Charging Port: Connect the provided USB Type-C cable for charging the internal battery.
- PHONES (3.5mm Jack): Connect headphones for silent practice. This output is MONO.
- AUX IN (3.5mm Jack): Connect external audio devices (e.g., smartphone, MP3 player) to play along with backing tracks.
4. Setup
4.1 Charging the Battery
The DK-iG-10Mini amplifier is equipped with a built-in 2000mA Lithium Battery. Before first use, it is recommended to fully charge the amplifier.
- Connect the provided USB Type-C charging cable to the Type-C port on the rear panel of the amplifier.
- Connect the other end of the USB cable to a compatible USB power adapter (DC5V, 1000mA recommended) or a computer USB port.
- The charging indicator light (if present, refer to visual cues on the device) will show charging status. A full charge typically takes approximately 2 hours.
- Once fully charged, disconnect the charging cable.
4.2 Powering On/Off
To power on the amplifier, rotate the VOLUME knob clockwise from the 'OFF' position. To power off, rotate the VOLUME knob counter-clockwise until it clicks into the 'OFF' position.
5. Operating Instructions
5.1 Basic Guitar Connection and Sound Adjustment
- Ensure the amplifier is powered off and all volume knobs are set to minimum.
- Connect your electric guitar to the INPUT (6.35mm) jack on the front panel.
- Power on the amplifier by rotating the VOLUME knob clockwise.
- Select your desired channel using the POWER / OVERDRIVE / CLEAN switch.
- Slowly increase the VOLUME knob to a comfortable listening level.
- Adjust GAIN for the desired amount of distortion (more gain for heavier distortion).
- Use the TONE knob to shape your sound, from warmer (lower settings) to brighter (higher settings).
- Adjust the REVERB knob for adding spatial depth to your sound.
5.2 Bluetooth Connection (B.T.)
The amplifier supports Bluetooth V5.0 for wireless audio streaming.
- Ensure the amplifier is powered on.
- Press and hold the REVERB / B.T. knob for a few seconds until the Bluetooth indicator light (if present) starts blinking, indicating pairing mode.
- On your audio device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "DK-iG-10Mini" (or similar name) from the list of devices to pair.
- Once paired, the Bluetooth indicator light will become solid. You can now play audio from your device through the amplifier.
- Adjust the volume on your audio device and the amplifier's VOLUME knob for desired playback level.
5.3 AUX Input
Connect an external audio source via the 3.5mm AUX IN jack.
- Connect a 3.5mm audio cable from your external audio device to the AUX IN jack on the rear panel.
- Play audio from your external device.
- Adjust the volume on your external device and the amplifier's VOLUME knob for desired playback level.
5.4 Headphone Use
For silent practice, connect headphones to the 3.5mm PHONES jack on the rear panel. The amplifier's speaker will be muted automatically.
6. Specifications
| Feature | Specification |
|---|---|
| Output Power | 20 Watt Peak |
| Speakers | 2 x 1.5 inch / 10 Watt full range speakers |
| Channels | Clean, Distortion (Overdrive) |
| Connectivity | 6.35mm Instrument Input, 3.5mm AUX In, 3.5mm Headphone Out, Bluetooth V5.0 |
| Controls | Volume (Input), Gain, Tone, Reverb (with Bluetooth function) |
| Battery | 3.7V 2000mA Lithium Battery (Included) |
| Charging | Type-C DC5V 1000mA |
| Charging Time | Approx. 2 hours |
| Endurance Time | Approx. 4-6 hours |
| Signal-to-Noise Ratio (Instrument) | 90dB |
| Input Noise Resistance (Instrument) | 1Mohm |
| Signal-to-Noise Ratio (AUX IN) | 95dB |
| Input Noise Resistance (AUX IN) | 10kohm |
| Material | Metal, Plastic |
| Dimensions (Package) | L160 x W105 x H110 mm |
| Net Weight | 400g |
| Gross Weight | 450g |
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from guitar | Amplifier is off; Volume is too low; Guitar cable faulty; Guitar volume off; Wrong channel selected. | Ensure amplifier is on and volume is up. Check guitar cable and guitar's volume knob. Verify correct channel (Clean/Overdrive) is selected. |
| No sound from Bluetooth/AUX IN | Device not paired/connected; Device volume too low; Amplifier volume too low. | For Bluetooth, re-pair the device. For AUX IN, ensure cable is fully inserted. Increase volume on both the audio device and the amplifier. |
| Unwanted noise/hum | Poor cable connection; Interference from other electronics; High gain setting. | Ensure all cables are securely connected. Move amplifier away from other electronic devices. Reduce GAIN setting. |
| Battery not charging | Faulty charging cable/adapter; Charging port issue. | Try a different USB Type-C cable and power adapter. Ensure the charging cable is fully inserted into the port. |
8. Maintenance
8.1 Cleaning
To clean the amplifier, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents, as they may damage the finish. Avoid spraying liquids directly onto the amplifier.
8.2 Battery Care
- To prolong battery life, avoid fully discharging the battery frequently.
- If storing the amplifier for an extended period, charge the battery to approximately 50% and recharge every few months.
- Do not expose the amplifier to extreme temperatures.
8.3 Storage
Store the amplifier in a cool, dry place away from direct sunlight and moisture. When not in use, disconnect all cables.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
