V508 Super Mini Zedbull Smart Zed-Bull Key Transponder Programmer Instruction Manual

1. Introduction

The V508 Super Mini Zedbull Smart Zed-Bull is a professional device designed for automotive immobilizer systems, offering advanced functionalities for key transponder programming, cloning, and PIN code reading. This manual provides essential information for the proper setup, operation, and maintenance of your device.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x V508 Super Mini Zedbull Smart Zed-Bull Key Transponder Programmer device
• 1 x Power Adapter
• 1 x Computer USB Cable
• 1 x CD (Software and drivers)

3. Setup

Follow these steps to set up your Zed-Bull device:

1. Install Software: Insert the provided CD into your computer's CD-ROM drive. Follow the on-screen instructions to install the Zed-BULL PC software and necessary drivers.
2. Connect Power: Connect the power adapter to the Zed-Bull device and then plug it into a suitable power outlet.
3. Connect to Computer: Use the provided USB cable to connect the Zed-Bull device to your computer.
4. Device Recognition: Once connected, the computer should recognize the device. The Zed-BULL PC software will assist in identifying the correct module automatically when an EEPROM file is selected, simplifying your work by providing ECU pictures, MCU/EEPROM locations, and transponder type information.

4. Operating Instructions

The Zed-Bull device offers a range of functions for key transponder programming and cloning. Its wide graphic LCD screen provides detailed information for ease of use.

4.1 Transponder Cloning

The device supports cloning for various transponder types, including:

• 11, 12, 13, 33, 73
• 4C (writing to 4C electronic key and battery-less TPX1 transponder)
• Crypto 40 (some), 41 (all), 42 (all), 44 (all unlocked), 45 (all)

Unlike older tools, the Zed-BULL can copy transponders like 41, 42, 44 (Unlocked), and 45 (PEUGEOT) which were previously considered non-copyable.

4.2 PIN Code Reading

The Zed-Bull is capable of reading PIN codes for Hyundai and Kia vehicles.

4.3 Transponder Production for OBD Programming

For OBD devices requiring special precoded transponders, the Zed-Bull allows you to produce them using blank transponders. This eliminates the need to purchase expensive precoded transponders. Supported transponder types for production include:

• 40, 41, 42, 44, 45, 73 Mitsub, 61, 62, 65
• 46 for BMW, PORSCHE, CHRYSLER, RENAULT, etc.

The device currently supports 24 different transponder production applications.

4.4 Hitag2 Transponder Programming

The Zed-Bull includes a Hitag2 programmer feature, allowing you to work with Hitag2 transponders without needing a separate device.

4.5 Advanced Features

• Automatic Module Finding (AMF): Automatically recognizes the module when an EEPROM file is selected.
• Wide Graphic LCD Screen: Displays detailed information such as VIN number and kilometer info for BMW cars, and detailed information for 46 and 48 transponders.
• 8C and 8E Chip Support: Features a function to distinguish between 8C and 8E chips.
• Improved Speed and Success Rate: The Smart Zed-Bull model offers 30% faster reading and writing speed and an improved success rate of up to 99.99%, reducing chip waste.

5. Maintenance

To ensure the longevity and optimal performance of your Zed-Bull device, follow these maintenance guidelines:

• Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Store the device in a dry, safe place when not in use.
• Handle the device and its components with care to prevent physical damage.

6. Troubleshooting

Here are some common issues and their resolutions:

• Device Not Powering On: Ensure the power adapter is securely connected to both the device and a working power outlet.
• Device Not Recognized by Computer: Verify the USB cable connection. Reinstall the PC software and drivers from the provided CD if necessary.
• Transponder Programming Failure: Ensure the transponder is correctly placed in the device's slot. Check the compatibility of the transponder type with the selected application. The Smart Zed-Bull has a high success rate, but some chips can only be written once.
• Software Issues: Ensure your operating system meets the minimum requirements for the Zed-BULL PC software.

Important Note: The V508 Super Mini Zedbull Smart Zed-Bull device cannot be updated.

7. Specifications

8. User Tips

• Cost-Effective Transponder Production: Utilize blank transponders with the Zed-Bull for OBD programming instead of purchasing expensive pre-coded ones.
• Maximize Success Rate: The Smart Zed-Bull boasts a 99.99% success rate for reading and writing. Ensure proper placement of chips to avoid waste, as some chips can only be written once.
• No Tokens Needed: This device operates without the need for tokens, providing unlimited usage for its functions.
• Check Compatibility: Always verify the compatibility of the transponder type and vehicle model with the device's supported applications before attempting any operation.

9. Frequently Asked Questions (FAQ)

Q: Can the Zed-Bull device be updated?

A: No, the V508 Super Mini Zedbull Smart Zed-Bull device cannot be updated.

Q: Does this device require tokens for operation?

A: No, the Zed-Bull operates without the need for any tokens.

Q: What types of transponders can this device clone?

A: It can clone 11, 12, 13, 33, 73, 4C, Crypto 40 (some), 41 (all), 42 (all), 44 (all unlocked), and 45 (all) transponders.

Q: Can it read PIN codes for specific car brands?

A: Yes, it can read PIN codes for Hyundai and Kia vehicles.

10. Warranty and Support

For technical support or inquiries, please refer to the contact information provided by your seller or distributor. Specific warranty details are typically provided at the point of purchase.