ACCEO UHD 4K Dash Cam User Manual

1. Introduction and Safety Notices

Thank you for choosing the ACCEO UHD 4K Dash Cam. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read all instructions carefully before use and retain this manual for future reference.

Safety Notices

• Only use original safety-tested accessories provided by the manufacturer.
• Remove the protective film from the screen and lenses before using the product.
• Do not place the product in a location that may affect the deployment of airbags or obstruct the driver's view.
• Securely mount this product before driving. Ensure the lenses are clean and not blocked.
• Do not leave the product in direct sunlight or extremely high temperatures. The operating temperature range is -20°C (-4°F) to 60°C (140°F).
• A formatted memory card is required before first-time use.
• Drive safely. Do not operate the product while driving to avoid distraction. Park your vehicle in a safe location before making adjustments.

2. Product Overview

Features

• Ultra HD Recording: Front camera records in 4K (3840x2160P) at 30FPS, rear camera in 1080P (1920x1080P) at 25FPS.
• Wide Viewing Angle: 170° front lens and 140° rear lens to reduce blind spots.
• GPS Function: View driving speed and trajectory via mobile app.
• WiFi Function: Connect to the dash cam via WiFi for photo capture, video recording, and playback through a mobile app.
• Smart Voice Control: Voice commands for functions like starting/stopping recording and connecting to WiFi (English playback).
• 24-Hour Parking Monitoring: Supports Collision Detection Parking Mode and Time-Lapse Parking Mode (requires optional hardwire kit).
• G-Sensor: Automatically locks video on impact to prevent overwriting.
• Loop Recording: Records in 1, 3, or 5-minute segments, overwriting the oldest files when the memory card is full.
• Built-in Screen: Yes, IPS display with 16:9 screen ratio.
• Audio Recorded: Yes.
• NightShot Function: Yes.

Specifications

Package Contents

The package contents vary depending on the selected model. Please verify your specific order.

• 1 x Packaging box
• 1 x DVR (Dash Cam)
• 1 x Electrostatic sticker
• 1 x Power charger (with GPS module)
• 1 x User manual
• 1 x USB Card Reader (Gift)

Optional Accessories (depending on model):

• 1 x 1080P Sony Night Vision Rearview Camera With 6 Meters Cable
• 1 x Hardwire Kit For 24H Parking Monitoring
• 1 x Real class10 High Speed TF Card

Figure 2.1: Package contents for B27P-Only 4K Dashcam

Figure 2.2: Package contents for B27P-6M RC model (with rear camera)

Figure 2.3: Package contents for B27P-6M RC-BL model (with rear camera and hardwire kit)

3. Setup and Installation

3.1 Physical Installation

1. Insert Memory Card: Insert a Class 10 or above Micro SD card into the memory card slot. Format the SD card before inserting it into the dash cam for the first time. Do not pull out or insert the memory card when the vehicle is driving to avoid damage.
2. Attach Dash Cam: Attach the dash cam to a suitable position on the front windshield, ensuring it does not obstruct your view.
3. Adjust Viewing Angle: Adjust the camera's viewing angle accordingly to capture the desired field of view.
4. Connect Power: Connect the USB power cable into the Type-C USB power port of the Dash Cam, then plug the car charger into your car's cigarette lighter socket.
5. Connect Rear Camera (Optional): If you have a rear camera, connect it with the extension cable into the Dash Cam to check if it works correctly. Then, install the rear camera on the rear windshield.

Figure 3.1: Easy Installation and Cable Routing

Figure 3.2: Dash Cam Ports (Charging, Memory Card, Rear Lens)

Figure 3.3: Dash Cam Dimensions

3.2 Hardwire Kit Installation (for 24H Parking Monitoring - Optional)

The hardwire kit allows for continuous power to the dash cam, enabling 24-hour parking monitoring without occupying the cigarette lighter interface. This kit is compatible with 12V power supplies only. If your vehicle uses a 24V power supply, a 24V to 12V converter is required. Use only customized KIT specifications for compatibility.

1. Find two fuse slots in your vehicle's fuse box:
   • One fuse slot that provides constant power (connect the RED wire here).
   • One fuse slot that only provides power when you turn your key to the ACC position (connect the YELLOW wire here).
2. Connect the BLACK wire to a grounding screw or bolt on the vehicle chassis.

Figure 3.4: Hardwire Kit Wiring Diagram and Installation Reference

3.3 GPS Module Connection (Optional)

If you have an external GPS module, connect it to the dash cam. After a successful GPS connection, the speed icon on the dash cam display will turn green.

4. Operating Instructions

4.1 Buttons and Lights

• Short press button (3 seconds): Take a photo.
• Click button: View WiFi information, switch between front camera view and rear camera view.
• Long press button: Turn the device On/Off.
• Press button (8 seconds): Restore factory settings.
• Blinking red light: Indicates video recording (Front/Rear camera).
• Blinking yellow light: Indicates locked video recording (G-sensor activated).

Figure 4.1: Dash Cam Button Location

4.2 App Installation and WiFi Connection

1. Install the App: Scan the QR code below or search for "Viidure" in the App Store (Apple) or Google Play (Android) to download the app.
2. Connect to WiFi:
   1. Ensure your mobile phone's WiFi and the dash cam's WiFi are turned on.
   2. Open the "Viidure" app.
   3. Connect the dash cam power supply.
   4. On the app, click "OK" to agree to system permissions.
   5. Go to your phone's WiFi settings and connect to the dash cam's WiFi network. The default WiFi Name is "Dashcam-XXXXXX" and the default WiFi Password is "12345678".
   6. Return to the "Viidure" app and click "CONNECT".
   7. Once successfully connected, you can access the dash cam's features.

Note: Please agree to the app's system permissions. If you accidentally deny them, clear the app data in your phone settings to restore the initial state. After starting the dash cam, connect to its Wi-Fi within 5 minutes. If disconnected, click the button on the dash cam to restart Wi-Fi.

Figure 4.2: WiFi-APP Control Interface

4.3 GPS Function (via App)

The dash cam includes a GPS function. Once connected, you can view your driving speed and trajectory through the mobile app. For detailed GPS video playback:

• Windows System: Insert the TF card into your computer. Select and install the GXPlayer installation package to watch videos.
• IOS System: Install the GXPlayer APP to watch videos directly on your MacBook.
• Mobile Phone: Connect your phone to the dash cam's WiFi, open the "Viidure" app, enter the app's photo album, select a video, and download it to your phone's local photo album. Downloaded videos can be viewed from "Local Files" in the app even with WiFi turned off.

Figure 4.3: GPS Tracking Display

4.4 Smart Voice Control

The dash cam supports smart voice control for various functions, reducing the need to interact with the device manually while driving. Examples of commands include "Video Start" and "Turn on WiFi".

Figure 4.4: Smart Voice Control Commands

5. App Settings

Access these settings through the "Viidure" mobile application:

• App Language: Set the desired language for the application.
• Date Format: Adjust the display format for dates.
• Sound Recording: Enable or disable audio recording.
• Speaker Volume: Adjust the dash cam's sound output (Mute, Low, Medium, High).
• Video Resolution: Set recording resolution for front (4K) and rear (1080P) cameras.
• Loop Recording: Configure the duration of each recording segment (1, 3, or 5 minutes). When storage is full, the oldest videos will be overwritten.
• Mirror: Toggle mirroring for the camera view (Off).
• Flip: Toggle image flipping (On).
• Collision Sensing: Adjust G-sensor sensitivity (Off, Low, Medium, High). When activated, the dash cam automatically locks the current video upon impact.
• Collision Detection (Parking Mode): Adjust sensitivity for parking mode (Off, Low, Medium, High).
• Time-Lapse Recording: Enable time-lapse recording (Off, 15 Min, 12 Hours, 24 Hours). Requires a hardwire kit.
• Low Voltage Regulation: Set the voltage threshold (11.8V, 12.0V, 12.2V) at which the camera will automatically shut down to protect the vehicle battery. Requires a hardwire kit.
• WiFi Password: Option to reset the WiFi password.
• Firmware Version: Displays the current firmware version.
• Format SD Card: Option to format the inserted memory card.
• Factory Reset: Restore all settings to their default factory values.

Figure 5.1: Parking Monitoring, G-Sensor, and Loop Recording Features

6. Maintenance

6.1 Memory Card Care

• Always use a high-quality Class 10 Micro SD card.
• Format the memory card regularly (e.g., monthly) to ensure optimal performance and prevent data corruption.
• Do not remove or insert the memory card while the dash cam is powered on or recording.

6.2 General Care

• Keep the camera lenses clean for clear recordings. Use a soft, lint-free cloth.
• Avoid exposing the dash cam to extreme temperatures or direct sunlight for prolonged periods.
• Ensure all cables are securely connected and not interfering with vehicle operation.

7. Troubleshooting

• Dash Cam not turning on: Ensure the power cable is securely connected to both the dash cam and the car's power source. Check the car's cigarette lighter or hardwire kit connection.
• Memory card abnormal/error: Format the SD card via the app settings. If the issue persists, replace the memory card with a new Class 10 or above Micro SD card.
• Cannot connect to WiFi: Ensure both the dash cam's WiFi and your phone's WiFi are enabled. Try restarting the dash cam's WiFi by clicking its button. If the problem continues, contact customer support.
• GPS signal issues: GPS signals can be affected by external interference, severe weather (rainstorm, snowstorm), tunnels, or remote mountainous areas. Ensure the GPS module (if external) is properly connected and positioned.
• GPS video playback issues: For PC, ensure you are using the GXPlayer software. For mobile, ensure videos are downloaded to local files within the "Viidure" app for offline viewing.
• Dash Cam shuts down unexpectedly in parking mode: Check the Low Voltage Regulation setting in the app. If the car battery voltage drops below this set value, the dash cam will shut down to protect the battery. Ensure your hardwire kit is correctly installed.
• Other issues: If you encounter any problems not listed here, try performing a factory reset via the app settings. If the issue remains unresolved, please contact customer support.

8. User Tips

• For optimal recording quality, always use a high-speed Class 10 Micro SD card. Lower quality cards may lead to recording errors or corrupted files.
• Regularly check your dash cam's mounting to ensure it remains secure and does not shift, which could affect recording angles.
• If using the 24-hour parking monitoring feature, ensure your hardwire kit is correctly installed and the low voltage cut-off is set appropriately to prevent draining your car battery.

9. Warranty and Support

Warranty

This product comes with a 365-day warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Additional Resources

For a detailed user manual and other documents, you can refer to the official PDF guide: User manual (PDF).

For further assistance or technical support, please contact your retailer or the manufacturer directly.