Morayelec ME202W

Contents

Morayelec ME202W Smart Liquid Level Sensor User Manual

Model: ME202W | Brand: Morayelec

1. Introduction

The Morayelec ME202W is a high-performance smart liquid level monitoring device designed for water and oil tanks. It offers unattended automatic detection and high-precision liquid level measurement using a submersible sensor. This device integrates with the Tuya SmartLife app, providing intelligent remote monitoring capabilities and real-time data access from your mobile device. It is also compatible with smart home systems like Alexa and Google Assistant, enhancing convenience and control over your liquid storage.

The ME202W is particularly suitable for various challenging scenarios, including tanks with floating balls, underground water tanks, and high humidity environments, where traditional ultrasonic sensors (like ME201W) might face limitations.

2. Specifications

AttributeValue
Product NameFluid Level Monitor
Model NumberME202W
Brand Namemorayelec
CertificationCE
OriginMainland China
ApplicationWater /Oil Tank
UsageHome Automation System
Operating Temperatures-20-70℃
Operation SystemAndroid, iOS APP
APPTuya SmartLife
Measuring Range10m
Accuracy±0.5%
Power Supply100-240VAC to DC 5V
Battery IncludedNo
High-concerned chemicalNone

Product Dimensions

Diagram showing the dimensions of the ME202W main unit, with measurements in millimeters.

Figure 1: Product Dimensions of the ME202W Main Unit.

3. Package Contents

Please check the package carefully to ensure all items are present and undamaged.

  • Main Control Unit (Tank Level Monitor)
  • Submersible Liquid Level Sensor (with attached cable)
  • Power Adapter (100-240VAC to DC 5V)
  • Mounting Screws
  • User Manual (this document)
Image showing all components included in the ME202W package: main control unit, submersible sensor, power adapter, mounting screws, and user manual.

Figure 2: ME202W Package Contents.

4. Installation and Initial Setup

4.1 Physical Installation

  1. Mount the Main Control Unit: Choose a suitable location for the main control unit, ensuring it is protected from direct weather exposure if installed outdoors. Use the provided mounting screws to secure it.
  2. Install the Submersible Sensor: Carefully lower the submersible liquid level sensor into the liquid to be measured (water or oil tank). Ensure the sensor is fully submerged and positioned correctly to accurately measure the liquid depth. The ME202W is designed for various tank types, including underground tanks.
Diagram showing the ME202W sensor installed in an above-ground tank, connected to the main unit and wirelessly to a smartphone app.

Figure 3: Installation in an Above-Ground Tank.

Diagram showing the ME202W sensor installed in an underground tank, connected to the main unit and wirelessly to a smartphone app.

Figure 4: Installation in an Underground Tank.

4.2 Power Connection

  1. Connect Power Adapter: Connect the provided AC/DC power adapter to the main control unit, then plug the adapter into a suitable power outlet.

4.3 Network Reset (Pairing Mode)

  1. Enter Pairing Mode: Press and hold the button on the main control unit for approximately 5 seconds. Release the button when the LED light on the unit begins to flash rapidly. This indicates the device is in network reset (pairing) mode and ready to connect to the mobile app.

Video 1: ME202W Setup and App Connection Guide. This video demonstrates connecting the power adapter, placing the sensor, entering pairing mode, and connecting the device to the mobile app.

5. App Connection (Tuya SmartLife)

  1. Download the App: Scan the QR code provided in the product packaging or search for "Tuya Smart" or "Smart Life" in your mobile device's app store (available for Android and iOS). Install and open the app.
  2. Enable Bluetooth and WiFi: Ensure your mobile device's Bluetooth and WiFi are turned on.
  3. Add Device: In the Tuya Smart or Smart Life app, tap the "+" icon or "Add Device" option. The app will automatically search for nearby devices in pairing mode.
  4. Select Device: Once "ME202W Level Sensor" appears in the search results, select it.
  5. Enter WiFi Information: Provide your home WiFi network name and password when prompted. Ensure your WiFi is 2.4GHz.
  6. Confirm Connection: Follow the on-screen prompts to complete the connection. A "Connection successful" message will appear once the device is added.
Screenshots illustrating the step-by-step process of connecting the ME202W sensor to the Tuya SmartLife app, including adding a device, entering WiFi credentials, and successful connection.

Figure 5: Tuya SmartLife App Connection Steps.

6. Operation

6.1 Monitoring Liquid Level

After successful connection, open the ME202W device interface in the Tuya SmartLife app to view real-time liquid level data. The app displays:

  • Liquid Level Ratio: Percentage of the tank filled.
  • Liquid Level Depth: Actual depth of the liquid in meters.
  • Liquid Level Status: Indicates 'Normal', 'Lower alarm', or 'Full alarm'.
  • Supply Voltage: Current power supply voltage (e.g., 5.0V).
  • History: Access historical data and alarm records.
Screenshot of the Tuya SmartLife app interface showing real-time liquid level data, including ratio, depth, status (e.g., Normal, Lower alarm, Full alarm), supply voltage, and historical graph.

Figure 6: App Interface for Liquid Level Monitoring.

6.2 Setting Alarms and Controls

Navigate to the 'Setting' section within the device interface to configure various parameters:

  • Set Max: Define the maximum liquid level percentage for a 'Full alarm'.
  • Set Min: Define the minimum liquid level percentage for a 'Lower alarm'.
  • Liquid Maximum Depth: Calibrate the maximum physical depth of your tank.
  • Auto Pump Control: Toggle between automatic and manual pump control.
  • Pump Mode: Select between 'Supply' (to fill the tank) or 'Drainage' (to empty the tank).
  • Pump Switch: Manually start or stop the pump when in manual control mode.

6.3 Suitable Scenarios for ME202W

The ME202W submersible sensor is designed to overcome limitations of other sensor types, making it ideal for:

  • Tanks with Floating Balls: Unlike ultrasonic sensors (e.g., ME201W) that can be disturbed by floating objects, the ME202W is not affected.
  • Underground Water Tanks: The submersible design allows for accurate measurement in underground installations where other sensors might not be applicable.
  • High Humidity Environments: The ME202W is suitable for environments with high humidity or steam, which can cause inaccuracies in ultrasonic measurements due to condensation.
Diagram comparing ME201W and ME202W sensors, highlighting ME202W's suitability for tanks with floating balls, underground tanks, and high humidity environments.

Figure 7: ME202W Scenario Suitability.

7. Maintenance

  • Regular Cleaning: Periodically inspect the submersible sensor for any buildup or debris that might affect its accuracy. Clean gently with a soft cloth and water if necessary.
  • Cable Inspection: Check the sensor cable for any signs of wear, damage, or kinks. Ensure it is securely connected to the main unit.
  • Power Supply: Ensure the power adapter is functioning correctly and providing stable 5V DC power.
  • Firmware Updates: Check the Tuya SmartLife app regularly for any available firmware updates for your device to ensure optimal performance and security.
  • Environmental Conditions: While the ME202W is robust, avoid exposing the main control unit to extreme temperatures or direct prolonged moisture.

8. Troubleshooting

ProblemPossible CauseSolution
Device not powering onNo power, faulty adapter, loose connectionCheck power outlet, ensure adapter is correctly plugged in, inspect cable connections.
Cannot connect to appIncorrect WiFi password, 5GHz WiFi, device not in pairing mode, Bluetooth/WiFi off on phoneVerify WiFi password, ensure 2.4GHz WiFi, put device into pairing mode (hold button 5s), enable Bluetooth/WiFi on phone.
Inaccurate liquid level readingsSensor obstructed, incorrect tank depth setting, sensor not fully submergedInspect sensor for obstructions, recalibrate 'Liquid Maximum Depth' in app settings, ensure sensor is fully submerged.
Alarms not triggeringAlarm thresholds not set, app notifications disabledSet 'Set Max' and 'Set Min' percentages in app settings. Check phone notification settings for Tuya SmartLife app.
Pump control not workingIncorrect pump mode, pump not connected (if applicable), 'Auto Pump Control' offVerify 'Pump Mode' and 'Auto Pump Control' settings in the app. Ensure external pump is correctly wired and functional (if used).

9. User Tips

No specific user tips from reviews or Q&A were provided for this product. However, general tips for smart home devices include:

  • Ensure your WiFi network is stable for consistent monitoring and notifications.
  • Regularly check the app for new features or improvements.
  • Consider setting up smart routines within the Tuya SmartLife app to automate pump operations based on liquid levels.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the Morayelec customer service directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.