BSMOOM Portable Jump Starter and Air Pump Instruction Manual

1. Introduction and Overview

The BSMOOM Portable Jump Starter with integrated Air Pump is a versatile emergency device designed to start vehicles with dead batteries and inflate tires. This 2024 upgraded model features a high peak current (6000A or 7000A) and a large battery capacity (21800mAh or 26800mAh), making it suitable for a wide range of vehicles including cars, trucks, motorcycles, RVs, snowmobiles, boats, tractors, ATVs, and UTVs. It also functions as a powerful portable power bank and a multi-mode emergency LED light.

Key features include:

• Powerful Jump Starter: Capable of starting all gas engines and up to 10L diesel engines.
• Smart Digital Tire Inflation: Features an LED smart screen for real-time tire pressure monitoring and supports four units (PSI, BAR, KPA, KG/CM). The 150PSI air compressor can inflate a standard car tire to 20PSI in approximately one minute.
• Advanced Safety: Equipped with a patented honeycomb cooling design and ten intelligent safety protections, including automatic connection detection and misconnection alarms, ensuring spark-free and safe operation.
• Extreme Temperature Performance: Designed to operate reliably in temperatures ranging from -4°F to 140°F (-20°C to 60°C).
• Portable Power Bank: Includes USB output ports (5V/1A, 9V/2A, 12V/1.5A) to charge mobile devices.
• Multi-function Emergency Light: Features 400 Lumens LED lights with Illumination, Flash, and SOS modes for visibility and emergency signaling.

2. What's in the Box

Please check the contents of your package upon receipt. The standard package includes:

• 1 x BSMOOM Portable Jump Starter & Air Pump Unit
• 1 x Jumper Cables (Smart Clamps)
• 1 x Inflatable Hose
• 4 x Nozzle Adapters (for various inflatables)
• 1 x USB Charging Cable
• 1 x User Manual
• (Optional: EVA Storage Bag, depending on the specific set purchased)

3. Specifications

4. Safety Information

Your BSMOOM Jump Starter is designed with multiple safety features. Please read and understand all safety warnings before use.

The device incorporates ten intelligent safety protections to ensure safe and spark-free operation:

• Over Current Protection
• Over Temperature Protection
• Over Voltage Protection
• No Spark Protection
• Over Charge Protection
• Over Discharge Protection
• Short Circuit Protection
• Anti-interference Protection
• Reverse Polarity Protection
• Low Temperature Protection

Important Safety Notes:

• Always ensure the jump starter is adequately charged before use.
• Do not attempt to jump start a vehicle if the jump starter's battery level is critically low.
• Ensure proper connection of the clamps to the vehicle battery terminals (Red to Positive, Black to Negative). Incorrect connection may trigger safety alarms.
• Remove the jump starter clamps from the vehicle battery immediately after the car engine starts.
• Do not expose the device to extreme heat or direct sunlight for prolonged periods.
• Keep out of reach of children.

5. Setup and Charging

5.1 Initial Charge

Before first use, fully charge your BSMOOM Jump Starter. Connect the provided USB charging cable to the USB-C IN/OUT port on the device and to a suitable USB power adapter (not included). The LCD screen will indicate the charging status and battery level.

5.2 Device Overview

The LCD screen displays:

• Accurate Battery Level
• USB ON/OFF status
• Temperature Protection Lamp indicator
• Bearing Temperature (-4°F/140°F)
• Display Values/Error Reminders
• Battery Capacity Indicator
• Tire Type Selection (Car, Motorcycle, Bicycle, Ball)
• Unit of Air Pressure (PSI, BAR, KPA, Kg/cm²)
• Abnormal Battery Temperature Indicator
• Fan Working Indicator
• Charging Other Devices Indicator

6. Operating Instructions

6.1 Jump Starting a Vehicle

1. Open the car hood.
2. Insert the starting cable (smart clamps) into the auto jump port on the jump starter unit. Ensure it is connected tightly.
3. Connect the black clamp to the negative terminal (-) of your car's battery.
4. Connect the red clamp to the positive terminal (+) of your car's battery.
5. The device's LCD screen will display the car battery's voltage.
6. Turn on your car engine.
7. Once the car starts, immediately remove the clamps from the car battery.
8. Close the car hood.

Note: Remove the clip immediately after starting the car to prevent damage.

6.2 Using the Air Pump Function

1. Press the OK button to turn on the device.
2. Press the M button to switch to the inflation function.
3. Press the M button again to cycle through the inflate types (car, motorcycle, bicycle, ball).
4. Long press the M button for 5 seconds. The screen will flash. Continue to click the M button to switch between pressure units (PSI, BAR, KPA, KG/CM²).
5. Use the + and - buttons to set your desired air pressure.
6. Connect the inflatable hose to the device and then to the item you wish to inflate.
7. After setting everything, long press the OK button for 4 seconds to start inflation.

The device supports tire pressure monitoring and will automatically stop when the preset pressure is reached.

6.3 Using the Emergency LED Light

1. Press the OK button to turn on the device.
2. Press the Light Button () to turn on the small light.
3. Long press the Light Button for 4 seconds to turn on the big light.
4. Once the big light is on, press the Light Button again to cycle through the modes: constant light, slow flash (warning light), and fast flash (SOS).

Note: Before turning on the big light, make sure the small light is off.

6.4 Using as a Portable Power Bank

The BSMOOM Jump Starter can also serve as a portable power bank to charge your electronic devices.

1. Connect your device's charging cable to one of the USB-A output ports or the USB-C IN/OUT port on the jump starter.
2. The jump starter will automatically begin charging your device. The LCD screen will indicate that it is charging other devices.

7. Maintenance

• Recharge Regularly: To maintain optimal battery health and ensure readiness for emergencies, recharge the jump starter every 3-6 months, even if not in use. The device boasts up to 24 months of standby time, but regular top-ups are recommended.
• Storage: Store the device in a cool, dry place away from direct sunlight, moisture, and flammable materials.
• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive cleaners.
• Avoid Extreme Temperatures: While designed for extreme temperatures, prolonged exposure to temperatures outside the -4°F to 140°F (-20°C to 60°C) range can affect battery life and performance.

8. Troubleshooting

• Device Not Turning On: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before it responds.
• Car Not Starting:
  • Check that the smart clamps are securely connected to both the jump starter and the car battery terminals.
  • Ensure correct polarity (Red to +, Black to -). The device has reverse polarity protection, but incorrect connection will prevent starting.
  • Verify the jump starter has sufficient charge.
  • Confirm your vehicle's engine size is within the device's capacity (e.g., up to 10L diesel).
• Air Pump Not Inflating:
  • Check that the inflatable hose is securely attached to both the device and the item to be inflated.
  • Ensure the correct pressure unit and target pressure are set on the LCD screen.
  • Verify the device has sufficient charge.
• Error Reminders on LCD Screen: Refer to the specific error code or message displayed on the screen and consult the full user manual for detailed explanations and solutions. Common errors relate to temperature protection or incorrect connections.

9. User Tips

• Always Be Prepared: Keep your BSMOOM Jump Starter fully charged in your vehicle for unexpected emergencies. Its compact size makes it easy to store.
• Cold Weather Performance: This device is designed to perform well in cold conditions (down to -4°F). If your car struggles to start in winter, this jump starter is a reliable solution.
• Multi-Purpose Tool: Remember to utilize all functions! The air pump is great for car tires, bicycles, and sports balls, while the power bank keeps your gadgets charged on the go. The flashlight is invaluable in low-light situations or emergencies.
• Quick Disconnect: Always disconnect the smart clamps from your car battery immediately after the engine starts to ensure safety and prevent potential damage to the device or vehicle.
• Flashlight Operation: When using the flashlight, remember to turn off the small light before activating the big light for optimal performance and to cycle through modes effectively.

10. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.