1. Introduction
This manual provides essential information for the safe and effective use of your Indekos Smartwatch Charging Cable. This magnetic USB charging cable is designed as a reliable backup or replacement for various smartwatch models, ensuring convenient and secure charging.
2. Product Specifications
| Feature | Detail |
|---|---|
| Input Voltage | 5V/1A |
| Output Current | 1A |
| Interface Type | Dedicated 2-pin magnetic watch interface |
| Contact Specification | 7.62 pitch |
| Cable Length | 60 cm (23.62 inches) |
| Material | Plastic |
| Electric | No (Non-electric component, refers to the cable itself) |
| High-concerned chemical | None |
| Origin | Mainland China |
The product has obtained safety certification and should be operated in accordance with the instructions and precautions.
3. Setup and Usage
- Connect to Power Source: Insert the USB-A end of the charging cable into a compatible 5V/1A USB power adapter or a computer's USB port.
Figure 1: Black charging cable with USB-A and magnetic connector. 
Figure 2: White charging cable with USB-A and magnetic connector. - Connect to Smartwatch: Align the dedicated magnetic 2-pin end of the cable with the charging contacts on the back of your smartwatch. The magnetic connection will gently snap into place.
Figure 3: Close-up of the black magnetic connector. 
Figure 4: Close-up of the white magnetic connector. - Monitor Charging: Once a normal connection is established, your smartwatch screen will display the charging status.
- Disconnect: After the smartwatch is fully charged, disconnect the charging cable from both the smartwatch and the power source in a timely manner.
4. Care and Maintenance
- Keep the charging cable clean and dry. Avoid exposing it to moisture or extreme temperatures.
- Store the cable neatly, avoiding kinks or sharp bends that could damage the internal wires.
- Regularly inspect the cable for any signs of wear, tear, or damage.
5. Important Precautions
- Only use a 5V/1A USB charger. Do not use fast charging adapters, as this may damage the cable or your smartwatch.
- If the charging cable appears damaged or deformed, immediately stop using it to prevent potential hazards.
- Avoid using your smartwatch while it is charging to prevent affecting its performance or causing damage to the device.
- Keep out of reach of children.
6. Troubleshooting
If your smartwatch is not charging, please check the following:
- No Charging Indication:
- Ensure the USB-A end is fully inserted into a working 5V/1A USB power source (adapter or computer port).
- Verify that the magnetic connector is correctly aligned and securely attached to the smartwatch's charging contacts.
- Check the charging cable for any visible damage or deformation. If damaged, discontinue use.
- Try using a different USB power source or adapter.
- Slow Charging:
- Ensure you are using a 5V/1A USB charger and not a lower-power source.
- Avoid using the smartwatch heavily during charging.
7. User Tips
- Compatibility Check: Before purchasing or using, always confirm that the charging cable is compatible with your specific smartwatch model (e.g., Q12, S12, LT21). While this cable supports many models, verifying compatibility ensures optimal performance.
- Magnetic Connection: The magnetic connection is designed for ease of use. Ensure the pins are clean and free of debris for a strong and reliable connection.
8. Warranty and Support
This product has obtained safety certification. For detailed warranty information and further support, please refer to the official user manual PDF available at this link.
Always operate the product in accordance with the provided instructions and precautions to ensure safety and longevity.