1. Introduction
The TYT CB Mini Walkie Talkie is a compact and versatile 11-meter CB radio designed for European Citizen Band use. It features a 4W power output, 40 channels, and supports both AM and FM modulation. Key functionalities include VOX, Automatic Squelch (ASQ), Noise Reduction (NR), Scan, and adjustable RF/Mic Gain, making it suitable for mobile communication.
2. Package Contents
Please check the package contents carefully. If any items are missing or damaged, contact your dealer immediately.
- 1 × TYT CB Mini Radio Body
- 1 × Speaker Mic
- 1 × Bracket
- 1 × Power Cable
- 1 × Screw Sets
- 1 × Hook for Speaker Mic
- 2 × Fuse
- 1 × English Manual

3. Product Overview
Familiarize yourself with the radio's components and controls.

- Microphone Jack
- A/FM MENU Button (AM/FM Modulation selection)
- ASQ BEEP Button (Automatic Squelch / Beep function)
- RFG MICG Button (RF Gain / Microphone Gain adjustment)
- DW SCAN Button (Dual Watch / Scan function)
- NR LOCK Button (Noise Reduction / Key Lock)
- Power On/Off Volume Control Knob
- LCD Display
- External Speaker Jack
- Antenna Jack
- DC Power Cable Connector

4. Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Verify that all items listed in the "Package Contents" section are present.
- Microphone Connection: Connect the speaker microphone to the Microphone Jack (1) on the front panel of the radio. Ensure it is securely fastened.
- Power Connection: Connect the provided DC Power Cable to the DC Power Cable Connector (11) on the rear of the radio. Connect the other end to a 13.8V DC power source, ensuring correct polarity (red to positive, black to negative).
- Antenna Connection: Connect a suitable CB antenna (UHF, SO239 type) to the Antenna Jack (10) on the rear of the radio. Ensure the antenna is properly tuned for the 27MHz band to prevent damage to the transceiver.
- Mounting (Optional): Use the provided bracket and screw sets to securely mount the radio in your vehicle or desired location. The hook for the speaker mic can be installed for convenient storage.
- External Speaker (Optional): If desired, connect an external speaker to the External Speaker Jack (9) for enhanced audio output.
5. Operating Instructions
- Power On/Off and Volume: Rotate the Power On/Off Volume control knob (7) clockwise to power on the radio. Continue rotating to adjust the volume.
- Channel/Frequency Selection: Use the UP/DN buttons on the microphone to change channels. The main knob (7) may also function as a channel selector in certain modes.
- Modulation Mode (AM/FM): Press the A/FM MENU button (2) to switch between AM and FM modulation modes.
- Squelch (ASQ/SQ):
- Automatic Squelch (ASQ): Press the ASQ BEEP button (3) to activate/deactivate ASQ. When active, the radio automatically mutes weak signals below a certain threshold.
- Manual Squelch (SQ): Rotate the main knob (7) while in SQ mode (often accessed via ASQ BEEP button) to manually adjust the squelch level.
- RF Gain Adjustment: Press the RFG MICG button (4) and then rotate the main knob (7) to adjust the RF Gain. This controls the receiver's sensitivity to incoming signals.
- Mic Gain Adjustment: Press the RFG MICG button (4) (or a combination with it) and then rotate the main knob (7) to adjust the Microphone Gain. This controls the microphone's sensitivity.
- VOX (Voice Operated Exchange): Press the VOX button on the microphone to activate the voice-operated transmission feature. This allows hands-free operation. Adjust VOX sensitivity if available in the menu.
- Scan Function: Press the DW SCAN button (5) to initiate channel scanning. The radio will scan through active channels. Press again to stop scanning.
- NR (Noise Reduction): Press the NR LOCK button (6) to activate/deactivate the Noise Reduction feature, which helps to filter out background noise.
- Backlight Brightness/Color Adjustment: The radio features backlight brightness and color adjustment. This is typically accessed via the A/FM MENU button (2) or a combination of buttons, then adjusted with the main knob (7).
- Roger Beep: This feature adds a short tone at the end of your transmission. It can usually be enabled/disabled via the menu.
- TOT (Time Out Timer): The Time Out Timer prevents accidental long transmissions by automatically stopping transmission after a preset time. This setting is usually found in the menu.
- MUTE: This function mutes the audio output. It can be activated via a dedicated button or a menu option.
- Key Lock: To prevent accidental changes, the keypad can be locked. This is often done by a long press of the NR LOCK button (6) or a specific key combination.
- Reset: A reset function is available to restore the radio to its factory default settings. This is typically a menu option or a combination of buttons held during power-on.


6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the radio's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the radio in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
- Connections: Periodically check all connections (antenna, microphone, power) for tightness and corrosion.
- Fuse Replacement: If the radio does not power on, check the inline fuse on the power cable. Replace it with a fuse of the same rating (MAX 2A).
7. Troubleshooting
- No Power:
- Check power cable connections.
- Verify the power source is providing 13.8V DC.
- Check and replace the fuse if blown.
- No Audio:
- Ensure volume is turned up.
- Check external speaker connection if used.
- Verify squelch (ASQ/SQ) is not set too high, muting all signals.
- Cannot Transmit/Low Power Output:
- Check antenna connection.
- Ensure the antenna is properly tuned.
- Verify microphone is connected and working.
- Check Mic Gain setting.
- Poor Reception/Transmission:
- Check antenna and its placement.
- Adjust RF Gain.
- Ensure you are on an active channel.
- Check for local interference.
- Buttons Unresponsive:
- Check if Key Lock is activated.
- Try performing a factory reset (refer to operating instructions).
8. User Tips
- Echo Feature: The radio includes an echo function, which can be adjusted through the menu for personalized audio effects.
- Frequency Range: The specified frequency range is 26.96500-27.40500MHz. The device is designed for this specific European CB band.
- Manual Availability: A comprehensive manual is typically included with the product. For additional information or troubleshooting, online resources may also be available.
9. Specifications
| General | |
|---|---|
| Frequency Range | 26.96500-27.40500MHz |
| Frequency Band | European CB Band (Citizen band) |
| Channels | 40 channels |
| Frequency Control | Phase-locked-loop Synthesizer |
| Frequency Tolerance | ±5.0ppm |
| Temperature Range | -20°c to +50°c |
| Microphone | With push-to-talk UP/DN buttons and coiled cord |
| Input Voltage | 13.8V |
| Dimensions | 145*107*27mm |
| Weight | 350g (Radio body only, speaker microphone excluded) |
| Antenna Connector | UHF, SO239 |
| Transmitter | |
| Power Output | 4W |
| Current Drain | Max. 2A (With modulation) |
| Modulation | FM/AM |
| Unwanted Sideband | 50dB |
| Frequency Response | AM/FM: 450 to 2500Hz |
| Receiver | |
| Sensitivity | AM: 1.0uV for 10dB (S+N)/N at greater than 1/2watt of audio output. FM: 1.0uV for 20dB (S+N)N at greater than 1/2 watt of audio output. |
| Selectivity | AM/FM: 6dB@3kHz, 50dB@9kHz |
| Adjacent-Channel Selectivity | 60dB AM/FM |
| Image Rejection | More than 65dB |
| IF Frequency | AM/FM: 10.695MHz 1stIF, 455KHz 2ndIF |
| RF Gain Control | 45dB adjustable |
| Automatic Gain Control (AGC) | Less than 10dB change in audio output for inputs from 10uV to 100,000uV |
| Squelch | Adjustable, threshold less than 0.5uV. Automatic Squelch control (only AM/FM) 0.5uV |
| Audio Output Power | 2W 16 ohms |
| Frequency Response | AM/FM: 300 to 2800Hz |
Note: Specifications are subject to change without notice due to advancements in Technology.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.