1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your IKSLED Mini Touch Sensor Switch. This versatile switch is designed to penetrate various non-metallic materials, offering a seamless and intuitive control solution for lighting and other low-voltage applications.

Figure 1: IKSLED Mini Touch Sensor Switch (PCB and shell versions)
2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance to prevent electric shock.
- Operate the switch within the specified voltage and current limits (DC 3.7V-24V, max 2.2A for 12V, 2.5A for 24V).
- Do not install near metal materials to avoid interference with the touch sensor's operation.
- This product is designed for non-metallic conductor materials.
- Keep out of reach of children.
3. Specifications
| Attribute | Value |
|---|---|
| Product Name | Wooden Touch DiHigh power touch switchmmer Switch |
| Brand Name | IKSLED |
| Model Number | Touch switch sensor |
| Model No | Penetrable switch sensor |
| Item Type | SWITCHES |
| Material | Plastic |
| Working Voltage | DC3.7V-24V |
| Current | 3A |
| Max Load | 12V 4A / 24V 2.5A |
| Function | Touch on/off + Stepless Dimming |
| Detection Range | ≤8mm (for penetrable materials) |
| Dimensions | 28x28x10mm (shell version), 20mm diameter (bare board) |
| Application | Wooden furniture cabinet desk |
| Certification | CCC |
| Warranty | 1 year |
Note: The sensitivity of the detection range varies with material thickness; thinner materials generally offer better sensitivity.
4. Package Contents
- 1 x IKSLED Mini Touch Sensor Switch (selected model and configuration)
- (Optional, depending on model) Connecting wires (e.g., DuPont line, regular wire)
5. Installation and Setup
5.1 Wiring Diagram
Refer to the diagram below for proper wiring connections. Ensure correct polarity (V+ to positive, V- to negative, LED+ to LED positive, LED- to LED negative) to avoid damage.

Figure 2: PCB Wiring Diagram
- V+ / V-: Connect to your DC power supply (3.7V-24V).
- LED+ / LED-: Connect to your LED strip or other load.
- Pilot Lamp: An onboard indicator light.
5.2 Mounting the Sensor
The sensor is designed to be installed behind non-metallic surfaces. The bare board version can penetrate materials up to 8mm thick. Products with shells typically do not have this penetration function and are designed for surface mounting or integration where the touch surface is directly accessible.

Figure 3: Examples of Penetrable Materials
- For penetrable installation (bare board): Attach the sensor tightly to the back of the desired non-metallic material (e.g., wood, glass, acrylic, plastic) using its adhesive backing. Ensure the material thickness is ≤8mm for optimal sensitivity. Avoid proximity to metal materials to prevent interference.
- For surface installation (shell versions): Secure the switch to the desired surface.
Watch the video below for a visual guide on installation and operation:
Video 1: Installation and Operation Demonstration (shows various modes)
6. Operating Instructions
The touch sensor switch offers different functionalities based on the model (A, B, C) you have purchased. The video demonstration also illustrates additional momentary modes that may be available in certain product variants.

Figure 4: Model Functionalities
6.1 Latching Functions (Models A, B, C)
- Model A: Touch on, no touch off
- A single touch will turn the connected device ON. The device will remain ON until power is removed.
- Model B: Touch on, touch off, dimmable
- A single touch will toggle the connected device ON/OFF.
- A long press will activate stepless dimming, allowing you to adjust the brightness.
- Features dual memory function, retaining the last brightness setting.
- Model C: Touch on, touch off, no dimmable
- A single touch will toggle the connected device ON/OFF.
- This model does not support dimming.
6.2 Momentary Functions (Variant Dependent)
Some variants of the touch sensor switch may offer momentary operation, as demonstrated in the product video:
- Momentary ON (Normally Open): Touch to activate (open circuit), release to deactivate (close circuit).
- Momentary OFF (Normally Closed): Touch to deactivate (close circuit), release to activate (open circuit).
6.3 Indicator Light
The switch includes a pilot lamp (blue indicator light) to show its status.

Figure 5: Pilot Lamp Visibility
- For white shell versions, the pilot lamp is clearly visible when turned on.
- For black shell versions, the pilot lamp may not be visible due to the non-transparency of the shell.
- A quick double-click on the touch area may activate certain functions or modes, especially for dimmable models with memory features.
7. Maintenance
- Keep the sensor and surrounding area clean and free from dust or debris that could affect touch sensitivity.
- Avoid exposing the switch to excessive moisture or extreme temperatures.
- Do not use harsh chemicals or abrasive cleaners on the switch.
- Regularly check wiring connections to ensure they are secure.
8. Troubleshooting
- Switch not responding:
- Check power connections (V+ and V-).
- Ensure the sensor is properly attached to the material and not near metal objects.
- Verify the material thickness is within the ≤8mm detection range for penetrable models.
- Confirm the correct model (A, B, or C) is being operated as intended.
- Inconsistent dimming (Model B):
- Ensure a continuous long press is applied for dimming.
- Check for any external interference.
- Pilot lamp not visible:
- This is normal for black shell versions due to the opaque casing.
- If using a white shell version, check power and connections.
9. User Tips
- For optimal sensitivity when installing behind a surface, ensure the sensor is firmly adhered without air gaps.
- Experiment with different non-metallic materials to find the best fit for your application. Thinner materials generally provide better touch response.
- When using the dimmable model (Model B), a quick double-click can sometimes reset or change modes, depending on the specific firmware.
- Consider the aesthetic: white shell versions allow the blue pilot light to be seen, which can be useful for locating the switch in the dark.
10. Warranty and Support
This IKSLED Mini Touch Sensor Switch comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.