Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Homcom Multifunctional Folding Wall Table with Shelves. Designed for small spaces, this wall-mounted desk offers a convenient workspace and storage solution that folds away when not in use. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assembly requires two people.
- Mount the desk securely to a sturdy wall structure (e.g., wall studs). Do not mount to drywall alone without proper anchors.
- Do not exceed the maximum load capacities specified in the 'Specifications' section.
- Keep small parts away from children during assembly.
- Regularly check all fasteners to ensure they remain tight.
Package Contents
Please verify that all components are included in your package:
- Main desk unit (wall cabinet with shelves)
- Folding table panel
- Metal hinges and support arms
- Adjustable shelf pins
- Mounting hardware (screws, wall anchors)
- Assembly instructions (this manual)
Setup and Assembly
Assembly is required for this product. Follow these steps carefully:
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the included parts list (if provided separately) to ensure all pieces are present.
- Assemble the Main Cabinet: Follow the specific diagrams in your package for assembling the main wall cabinet structure. This typically involves attaching side panels to the top and bottom panels using provided fasteners.
- Install Shelves: Insert the adjustable shelf pins into the desired holes within the cabinet. Place the adjustable shelf onto these pins. The unit includes 3 shelves, with one being adjustable to suit your storage needs.
- Attach Folding Table Panel: Secure the folding table panel to the bottom front edge of the main cabinet using the provided metal hinges. Ensure the hinges are aligned correctly for smooth operation.
- Install Support Arms: Attach the metal support arms to the inside of the cabinet and the underside of the folding table panel. These arms are crucial for holding the table in the open position. Ensure they are securely fastened and operate smoothly to lock the table in place when open.
- Wall Mounting:
- Choose a suitable location on a sturdy wall. Use a stud finder to locate wall studs for secure mounting.
- Mark the drilling points on the wall according to the mounting holes on the back of the cabinet.
- Drill pilot holes. If mounting into drywall without studs, use appropriate heavy-duty wall anchors (not always included, may need to be purchased separately based on wall type).
- Lift the assembled desk unit and align the mounting holes with the drilled holes. Secure the unit to the wall using the provided screws. Ensure it is level and firmly attached.
Visual Aid:

Figure 1: Product Dimensions and Internal Layout

Figure 2: Detail of Metal Hinge Mechanism

Figure 3: Detail of Adjustable Shelf
Operating Instructions
This wall table is designed for easy conversion between a compact cabinet and a functional desk.
- To Open the Desk: Gently pull the bottom panel downwards. The metal support arms will extend and lock into place, holding the panel horizontally to form the desk surface.
- To Close the Desk: Push the support arms inwards to release the lock. Carefully lift the table panel upwards until it clicks into place against the main cabinet. The magnetic closure will help keep it securely closed.
Visual Aid:

Figure 4: Desk in Open Position

Figure 5: Desk in Closed Position
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the melamine finish.
- Inspection: Periodically check all screws and fasteners to ensure they are tight. Re-tighten if necessary.
- Hinge Care: If the folding mechanism becomes stiff, apply a small amount of silicone lubricant to the hinges and support arms.
Troubleshooting
- Desk not folding/unfolding smoothly: Check hinges and support arms for obstructions or loose fasteners. Ensure they are clean and lubricated if needed.
- Desk feels unstable: Verify that the unit is securely mounted to the wall. Check all assembly fasteners for tightness. Ensure weight distribution on the desk and shelves is even and within limits.
- Magnetic closure not holding: Check if the magnetic plates are aligned correctly. Ensure no debris is preventing full contact.
Specifications
| Feature | Detail |
|---|---|
| Model | 836-532 |
| Color | White |
| Material | Melamine Wood |
| Overall Dimensions (LxWxH) | 64 cm x 20 cm x 60 cm |
| Table Surface Dimensions (LxW) | 60.5 cm x 41.5 cm |
| Compartment Size (Open, LxWxH) | 60.5 cm x 16.5 cm x 13 cm |
| Compartment Size (Shelf in Middle, LxWxH) | 60.5 cm x 16.5 cm x 20 cm |
| Max. Total Load Capacity | 40 kg |
| Max. Table Load Capacity | 25 kg |
| Max. Shelf Load Capacity | 5 kg |
| Installation Method | Wall-mounted (Assembly Required) |
Visual Aid:

Figure 6: Key Features and Load Capacity
User Tips
- Finish Type: The product features a white melamine finish, which typically has a smooth, semi-matte appearance.
- Cable Management: Consider adding adhesive cable clips to the underside of the desk or inside the cabinet to keep wires tidy when using electronics.
- Personalization: Utilize the adjustable shelf to customize storage for books, decorative items, or office supplies.
Warranty and Support
For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. If you encounter any issues or require assistance with your Homcom product, please reach out to the customer support of your seller with your model number (836-532) and proof of purchase.