1. Introduction
The AUXBEAM AC-1200 RB120 is an advanced 12-gang RGB LED switch panel designed to provide comprehensive control over your vehicle's accessories. Featuring multiple operating modes, Bluetooth APP control, and a wireless remote, this system offers flexibility and convenience for managing various lights and devices. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and safety.
Figure 1: AUXBEAM AC-1200 RGB LED Switch Panel with remote and app interface.
2. Key Features
- 12-Gang Control: Manage up to 12 different LED lights or devices from a single panel.
- Multiple Control Methods: Direct switch panel operation, Bluetooth APP control, and wireless remote control.
- RGB Backlight: Unlimited color options to match your vehicle's dash lighting.
- 3 Lighting Modes: Toggle (constant light), Momentary (press and hold), and Pulsed (flash mode).
- APP Features: Group setting for simultaneous control, DIY button icons (120 stickers/200 default icons/phone photos), color and brightness adjustment.
- Wireless Remote: Magnetic backplate, 165ft/50m connection range, supports pairing with up to four remotes, replaceable battery.
- Automatic Backlight Dimming: Adjusts brightness based on ambient light.
- Universal Fitment: Suitable for trucks, boats, cars, buses, off-road vehicles, powersports, marine, ATVs, UTVs, SUVs, SxS, and heavy-duty machines.
- Safety Protections: Built-in resettable fuse, reverse polarity protection, over-voltage protection, and over-current protection.
- Easy Installation: Plug & play wiring harness, no cutting or splicing required. Includes two types of mounting brackets.
- Extension Cable: 20-foot, 4-pin wiring harness extension for flexible control box placement.
3. Specifications
| Parameter | Value |
|---|---|
| Voltage Input | DC 12-24V |
| Max Current | 100A |
| Rated Voltage | 12V 20A / 24V 10A |
| Max Power | 1200W (12V) / 2400W (24V) |
| Waterproof Rating | IP65 |
| Operating Temperature | -40°C ~ 105°C (-40℉ ~ 221℉) |
| Remote Control Range | Up to 165ft / 50m |
| Extension Cable Length | 20 feet |
Figure 2: Product features and dimensions of the switch panel and control box.
4. Setup and Installation
Before installation, ensure your vehicle's battery is disconnected to prevent electrical shorts. Refer to the included installation instructions for detailed diagrams.
4.1 Package Contents
Video 1: Unboxing and overview of the AUXBEAM AC-1200 RB120 Switch Panel components.
The package includes:
- 1 Set of 12 Gang RGB Switch Panel (with necessary hardware and wiring harness)
- Wireless Remote Control (with batteries)
- Installation Instructions
- 120pcs stickers for switch customization
- 20FT 4-pin Extension Cable (if included in your model)
4.2 Mounting the Switch Panel
Choose a suitable location for the switch panel, such as the dash panel, center console, or overhead sunglasses holder. Use one of the two provided mounting brackets to secure the panel. Ensure the location allows for easy access and visibility.
4.3 Wiring the Control Box
The control box provides a clean and organized way to connect and manage your vehicle's accessories. Follow these steps:
- Connect to Battery: Connect the main power wires from the control box to your vehicle's battery (positive and negative terminals).
- Connect ACC Wire: Connect the ACC (Accessory) wire to a switched power source in your vehicle. This ensures the panel powers on/off with your ignition.
- Connect Accessories: Connect your LED lights or other accessories to the designated output terminals on the control box. The control box features various amperage fuses (5A, 10A, 20A, 30A) for different accessories.
- Secure Wiring: Ensure all connections are secure and wires are neatly routed and protected. The fuse adapter allows for easy connection to the vehicle's fuse box without damaging original wiring.
Figure 3: Detailed wiring diagram for connecting accessories to the control box.
Figure 4: Example of a clean wiring solution using the AUXBEAM switch panel.
5. Operation
5.1 Direct Switch Panel Operation
Each button on the switch panel controls a connected accessory. Press a button to activate or deactivate the corresponding accessory. The LED indicator on each button will show its status.
5.2 Lighting Modes
The switch panel supports three distinct lighting modes for each switch:
- RED - Toggle Mode: Provides a constant light output. Ideal for accessories like fog lights or driving lights that need to stay on.
- BLUE - Momentary Mode: The accessory is active only while the button is pressed and held. Releasing the button turns the accessory off. Useful for horns or temporary signals.
- GREEN - Pulsed Mode: The accessory flashes on/off repeatedly until the button is pressed again to stop the flashing. Suitable for warning lights or strobes.
Figure 5: Visual representation of the three lighting modes.
5.3 Backlight Brightness Adjustment
The panel offers three ways to adjust backlight brightness:
- APP Manual Adjustment: Use the Bluetooth APP to manually set the desired backlight color and brightness.
- Automatic Brightness Sensing: The panel features an automatic light sensor that adjusts backlight brightness based on ambient light conditions.
- Manual Backlight ON/OFF: You can manually turn off the backlight when it's daytime or not needed.
Figure 6: Illustration of backlight brightness adjustment methods.
5.4 Bluetooth APP Control
The dedicated Bluetooth APP allows for advanced control and customization:
- Synchronization: The APP, remote, and switch panel work synchronously. Changes made on one device are reflected across all.
- Group Setting: Create custom groups to manage multiple accessories simultaneously. Assign two or more accessories to a single switch button for combined control.
- DIY Icons: Personalize your switch panel with 120 universal stickers, 200 default icons, or even photos from your phone album.
- Color & Strobe Speed Control: Adjust the RGB backlight color and strobe speed directly from the APP.
Figure 7: App and remote control synchronization with the switch panel.
5.5 Wireless Remote Control
The wireless remote control offers convenient operation from a distance:
- Pairing: One control box can pair with up to four wireless remote controllers.
- Magnetic Backplate: The remote has a strong magnetic backplate, allowing it to be easily attached to metal surfaces for quick access.
- Range: Operates up to 165ft/50m from the control box.
- Memory Function: The system remembers your last settings, ensuring your preferences are retained even after power cycles.
6. Maintenance
- Cleaning: Regularly wipe the switch panel and control box with a soft, damp cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Fuse Check: The system includes resettable fuses. In case of an overload, the fuse will trip to protect the circuit. If an accessory stops working, check the corresponding fuse on the control box. If it's a resettable fuse, it may reset automatically or require a manual reset.
- Remote Battery Replacement: The wireless remote control uses replaceable batteries. If the remote's performance degrades, replace the batteries as needed.
- Wiring Inspection: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Ensure the control box cover is securely fastened to maintain its IP65 waterproof rating.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch panel not powering on | Loose power connection, ACC wire not connected, vehicle battery low. | Check battery connections, ensure ACC wire is connected to a switched power source, verify vehicle battery voltage. |
| Accessory not working | Blown fuse, loose accessory wiring, incorrect mode setting. | Check the system failure indicator on the control box. Inspect the fuse for the specific accessory. Verify accessory wiring connections. Ensure the correct lighting mode (Toggle, Momentary, Pulsed) is selected. |
| Bluetooth APP not connecting | Bluetooth off on phone, APP not updated, interference. | Ensure Bluetooth is enabled on your mobile device. Update the AUXBEAM APP to the latest version. Try restarting the APP and the switch panel. |
| Wireless remote not responding | Remote battery low/dead, out of range, interference. | Replace the remote control batteries. Move closer to the control box (within 165ft/50m). Ensure no obstructions are blocking the signal. |
| Backlight not adjusting automatically | Light sensor obstructed or faulty. | Ensure the automatic light sensor on the panel is not covered. If the issue persists, manual adjustment via APP is still available. |
The control box includes a System Failure Indicator to help diagnose issues. Consult the indicator for specific fault codes or patterns.
8. User Tips
- Icon Customization: Take advantage of the DIY icon feature in the APP to create unique and easily recognizable labels for each switch, improving usability.
- Group Control: For common scenarios, group related accessories (e.g., all off-road lights) using the APP's group setting. This allows for single-button activation of multiple devices.
- Automatic Dimming: Utilize the automatic backlight dimming feature for optimal visibility in varying light conditions, reducing distraction during night driving.
- Remote Placement: Use the magnetic backplate of the wireless remote to conveniently place it within easy reach, such as on a metal dashboard component or roll bar.
9. Warranty and Support
For any questions, technical assistance, or support regarding your AUXBEAM AC-1200 RB120 Switch Panel, please contact AUXBEAM customer service. Refer to the product packaging or the official AUXBEAM website for the most current contact information.
