TKXEC LCR-MF9

Contents

TKXEC LCR-MF9 Multi-function Transistor Tester User Manual

Model: LCR-MF9 | Brand: TKXEC

1. Introduction

The TKXEC LCR-MF9 is a versatile multi-function tester designed for automatically detecting and analyzing various electronic components. Featuring a 1.8-inch TFT color screen, it provides clear graphical displays of component parameters and pin layouts. This manual will guide you through the setup, operation, and maintenance of your LCR-MF9 tester.

2. Product Overview

LCR-MF9 Transistor Tester with labeled parts
Figure 2.1: LCR-MF9 Multi-function Tester with key components labeled.

This image shows the front view of the LCR-MF9 tester, highlighting its TFT Display, IR receiver window, Test button, Transistor test area, Zener Diode test area, and USB charging port.

The LCR-MF9 integrates multiple testing capabilities into a compact and user-friendly device. It can identify and measure characteristics of transistors, diodes, capacitors, resistors, inductors, and more. Its built-in rechargeable lithium battery ensures portability and convenience.

3. Setup

  1. Charging the Battery: The device comes with a built-in 300mAh 4.2V lithium battery. Before first use, or when the battery is low, connect the included USB cable to the USB charging port on the side of the device and to a standard USB power source (e.g., computer, USB wall adapter).
  2. Initial Power On: Press the 'TEST' button to power on the device. The TFT color screen will light up.
  3. Calibration: For accurate measurements, especially for small resistors, it is recommended to perform a calibration. The device is equipped with a calibration needle. Refer to the operating instructions for the calibration procedure.
LCR-MF9 Transistor Tester with accessories
Figure 3.1: LCR-MF9 Tester with included USB charging cable and test clips.

This image displays the LCR-MF9 tester along with its standard accessories, including the USB charging cable and various test clips, which are essential for connecting components for testing.

4. Operating Instructions

The LCR-MF9 offers a simple one-click operation for testing components. Insert the component into the appropriate test area (Transistor test area or Zener Diode test area) and press the 'TEST' button.

4.1 Component Testing

The tester automatically detects the type of component and displays its parameters and pin layout graphically on the 1.8-inch TFT color screen. The testing speed is typically within 2 seconds, though larger capacitors may require more time.

  • Transistors: Automatically detects NPN and PNP transistors, N-channel and P-channel MOSFETs, and IGBT diodes (including dual diodes). It measures amplification factor, cardinality, and MOSFET protection diodes, determining the forward bias voltage of the emitter transistor. It can distinguish between depletion type and enhancement type MOSFETs and measures gate threshold voltage and gate capacitance for MOSFETs.
  • Diodes: Detects various diodes, including Zener diodes.
  • Resistors: Supports measurement and symbol display of two resistors. Resistance measurement has a resolution of 0.1 ohms and a maximum measurement value of 50M ohms.
  • Capacitors: Capacitors above 10µF can display VOSS and ESR.
  • Inductors: Inductance will be measured when the resistance is below 2100 ohms. Inductance below 10µH will only measure DC resistance.
  • Thyristors & Triacs: Automatically detects and displays parameters.
LCR-MF9 screen displays for various components
Figure 4.1: Example screen displays for different component types.

This image illustrates how various components like N-JFET, Diode, Capacitor, Inductor, Resistor, Battery, Thyristor, and Triac are graphically represented on the LCR-MF9's TFT display after testing.

4.2 Infrared (IR) Decoding

The LCR-MF9 can detect infrared encoding, supporting NEC format infrared remote controls. Point the remote control towards the IR receiver window and press a button to see the decoded user code and data code on the screen.

LCR-MF9 demonstrating IR decoding
Figure 4.2: LCR-MF9 performing IR decoding with a remote control.

This image shows the LCR-MF9 tester successfully decoding an infrared signal from a remote control, displaying the UserCode and DataCode on its screen.

4.3 Video Demonstration

Video 4.1: Demonstration of LCR-MF9 component testing.

This video provides a visual guide on how to test various electronic components such as resistors, capacitors, diodes, transistors, and more using the LCR-MF9 Multi-function Tester.

5. Maintenance

  • Automatic Shutdown: The device features an automatic shutdown function to conserve battery energy and prolong battery life.
  • Low Power Consumption: In shutdown mode, the power consumption is less than 20 nA.
  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners or solvents.
  • Storage: Store the tester in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • "No, unknown, or damaged part?" message: If this message appears, ensure the component is correctly inserted into the test socket and is not damaged. Check for proper contact.
  • Inaccurate Readings: Ensure the device is fully charged. For small resistors, use the calibration needle for more accurate results.
  • Device not powering on: Check if the battery is charged. Connect to a USB power source to charge.

7. Specifications

Table 7.1: LCR-MF9 Key Specifications
FeatureValue/Range
DisplayTFT 1.8-inch Color Screen
Operating ModeAuto Range
BatteryBuilt-in 300mAh 4.2V Lithium Battery
Capacitance Measurement25pF ~ 100mF
Resistance Measurement0.01Ω ~ 50MΩ
Inductance Measurement0.01mH ~ 20H
Testing SpeedTypically within 2 seconds
Shutdown Power Consumption< 20 nA
Product Dimensions (L x W x H)90 x 60 x 27 mm
DIY SuppliesElectrical
OriginMainland China
Performance parameters table for LCR-MF9
Figure 7.1: Detailed performance parameters for various component types.

This table provides a comprehensive breakdown of the LCR-MF9's measurement capabilities and ranges for different component types, including BJT, Diode, Zener Diode, MOSFET, Thyristor, Triac, Capacitor, Resistor, Inductor, and Battery.

LCR-MF9 dimensions
Figure 7.2: Physical dimensions of the LCR-MF9 tester.

This image shows the compact size of the LCR-MF9, with dimensions of 90mm length, 60mm width, and 27mm height.

8. User Tips

  • Capacitor Discharge: Always ensure capacitors are fully discharged before measuring their capacitance to prevent damage to the tester or inaccurate readings.
  • Zener Diode Placement: For Zener diodes higher than 5V, place them in the dedicated Zener Diode test area (indicated below the main transistor test area) for accurate measurement.
  • Accuracy for Small Resistors: Utilize the provided calibration needle and perform calibration for enhanced accuracy when testing small resistance values.

9. Warranty and Support

For any technical assistance, warranty claims, or product inquiries, please contact the seller or manufacturer directly. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.