1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your Tuya Smart Zigbee Rain Sensor with Light Detector, Model WKD-LS100. This device is designed to enhance your smart home system by providing real-time rain and light intensity data, enabling automated responses and improving your overall intelligent experience.

2. Product Features
- 2-in-1 Functionality: Integrates both rain sensing and light intensity detection.
- Solar Powered: Ultra-low power consumption design with a built-in 1300mAh lithium battery, charged by solar energy for continuous operation.
- Zigbee Connectivity: Utilizes Zigbee wireless protocol for seamless integration with your smart home system (requires a Tuya Zigbee gateway, not included).
- Durable Design: Rain sensing surface features an immersion gold process for excellent corrosion resistance.
- Waterproof: Rated IP66 for robust outdoor use.
- Adjustable Bracket: Allows for flexible installation and optimal positioning.

3. Setup and Installation
3.1 Package Contents
- 1 x Tuya Smart Zigbee Rain Sensor with Light Detector
- 1 x Adjustable Mounting Bracket
- (Mounting screws/hardware may be included, check packaging)
3.2 Pre-installation Checklist
- A compatible Tuya Zigbee Gateway (required for Zigbee communication and APP integration).
- A smartphone with the Tuya Smart or Smart Life app installed.
- A suitable outdoor location with direct sunlight exposure for solar charging and clear access to rain.
3.3 Physical Installation
- Choose an optimal outdoor location that receives ample direct sunlight throughout the day for efficient solar charging. Ensure the rain sensing surface is exposed to rain without obstruction.
- Mount the adjustable bracket securely to a wall, fence, or other stable surface using appropriate screws (not always included).
- Attach the rain sensor to the adjustable bracket.
- Adjust the direction and angle of the sensor to maximize solar exposure and ensure proper rain detection.

3.4 Adding to Tuya App
- Ensure your Tuya Zigbee Gateway is powered on and connected to your home network.
- Open the Tuya Smart or Smart Life app on your smartphone.
- Navigate to your gateway device in the app.
- Select "Add sub-device" or a similar option to put the gateway into pairing mode.
- Follow the on-screen instructions in the app to discover and add the rain sensor. The sensor should automatically enter pairing mode when first powered on or reset.
- Once successfully added, you can rename the sensor and configure its settings within the app.
4. Operation
The sensor provides real-time data to your Tuya Smart app and can be used to trigger automated actions.
4.1 Rain Detection
- When rain is detected, the sensor sends an instant alert to your Tuya Smart app.
- You can set up smart scenes to react to rain detection, for example:
- Automatically close smart windows or window pushers.
- Turn off smart irrigation systems.
- Send push notifications to your phone.
4.2 Light Detection
- The sensor measures ambient light intensity and displays it in real-time within the Tuya Smart app.
- Light data is recorded in the cloud, allowing you to track illumination levels over time.
- Automate actions based on light levels:
- If light is too dark, automatically open smart curtains or turn on smart lights.
- If light is too bright, automatically close smart blinds.
4.3 Power Management
- The app displays the current power level of the built-in lithium battery.
- A low power reminder function will alert you when the battery needs charging, though solar charging should keep it powered under normal conditions.
5. Maintenance
- Cleaning: Periodically clean the solar panel and rain sensing surface with a soft, damp cloth to ensure optimal performance. Avoid abrasive cleaners.
- Positioning: Regularly check that the sensor's position still allows for maximum solar exposure and unobstructed rain detection.
- Battery: The built-in lithium battery is designed for long life with solar charging. If the device consistently reports low battery despite adequate sunlight, ensure the solar panel is clean and unobstructed.
- Corrosion: The immersion gold process on the rain sensing surface provides excellent corrosion resistance, but extreme environmental conditions may still affect it over time. Inspect periodically for any signs of wear.
6. Troubleshooting
- Sensor not connecting to Tuya App:
- Ensure your Tuya Zigbee Gateway is online and within range of the sensor.
- Verify the gateway is in pairing mode when attempting to add the sensor.
- Check the sensor's battery level in the app (if it was previously connected) or ensure it has received sufficient solar charge.
- Try resetting the sensor (refer to manufacturer's instructions for specific reset procedure, usually a button press).
- Inaccurate Rain Detection:
- Check if the rain sensing surface is clean and free from dirt, leaves, or debris.
- Ensure the sensor is positioned where rain can directly fall on it without being blocked by overhangs or other structures.
- Inaccurate Light Detection:
- Ensure the light sensor area is clean and unobstructed.
- Consider ambient light conditions; direct sunlight vs. shade will yield different readings.
- Battery not charging / Low Power Reminders:
- Ensure the solar panel is clean and receives several hours of direct sunlight daily.
- Relocate the sensor to a sunnier spot if necessary.
- Extreme cold or prolonged periods without sunlight can affect charging efficiency.
7. Specifications

| Parameter | Value |
|---|---|
| Product Name | Solar light rain sensor |
| Model | WKD-LS100 |
| Brand Name | FGHGF |
| Power Supply | Solar charging |
| Battery | Lithium battery 3.7V/1300mAh |
| Wireless Protocol | Zigbee |
| Waterproof Level | IP66 |
| Update Time | 60 seconds |
| Product Size | 104mm x 104mm x 21mm (without bracket) |
| Working Temperature | -10℃ to 50℃ |
| Material | Plastic |
| Color | Black |
8. User Tips
- Gateway Proximity: For reliable Zigbee communication, try to install the sensor within a reasonable range of your Tuya Zigbee gateway. Walls and other obstructions can reduce signal strength.
- Optimal Placement: When installing, consider both direct sunlight for charging and an unobstructed view of the sky for accurate rain detection. Avoid placing it under eaves or dense foliage.
- App Integration: If you encounter issues adding the sensor to the Tuya app, ensure your gateway is updated and try restarting both the gateway and the sensor before attempting to pair again.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided by your retailer or contact the manufacturer directly. Ensure you have your product model (WKD-LS100) and purchase details available when seeking support.
As this device requires a Tuya Zigbee Gateway for full functionality, ensure your gateway is also properly configured and supported by the Tuya ecosystem.