1. Introduction
The NicetyMeter 7-in-1 LoRa Weather Station provides comprehensive indoor and outdoor weather monitoring. Featuring a LoRa (Long-Range) chip, it offers significantly extended wireless transmission distance between the outdoor sensor and the indoor console. This system measures temperature, humidity, wind speed, wind direction, rainfall, UV index, and solar radiation, providing real-time data and forecasts to help you stay informed about your local weather conditions.
2. What's in the Box
- Digital display console (1)
- Outdoor transmitter (1)
- User manual (1)
- Power adaptor for console (1) (EU/US/UK/AU Plug)
3. Setup
3.1 Outdoor Sensor Assembly
The outdoor sensor is an integrated unit comprising a rain collector, wind cups, wind vane, UV and light sensor, and a thermo-hygrometer radiation shield. Assemble these components as shown in the diagram and video. Ensure all parts are securely fastened.

3.2 Outdoor Sensor Battery Installation
The outdoor sensor requires 3 AA batteries (not included) for operation, supplemented by a solar panel for backup power. Open the battery compartment, insert the batteries, and close the compartment securely.

3.3 Console Power Supply
The indoor display console is powered by a power adapter (included). It also requires 3 AAA batteries (not included) for backup power. Always use the power adapter for primary operation. Insert AAA batteries into the console's battery compartment.

3.4 Mounting the Outdoor Sensor
The outdoor sensor can be mounted in various ways: on a pole, on a fence, or on an eave. Choose a location that is open and free from obstructions to ensure accurate readings for wind, rain, and sunlight. Secure the mounting bracket using screws and bolts as appropriate for your chosen surface. Ensure the sensor is level using the built-in level indicator.

3.5 Initial Power-up and Pairing
Power up the outdoor sensor before powering up the console. Once both units are powered, they should automatically pair. If pairing does not occur, refer to the troubleshooting section.
4. Operation
4.1 Console Display Overview
The 7.3-inch color display console shows real-time data for gust wind, average wind, rain rate, sun intensity, UV index, outdoor temperature, indoor temperature, dew point, feels like temperature, pressure, humidity, and moon phase. Use the 'MIN/MAX' button to view minimum and maximum recorded values. The 'SNOOZE/LIGHT' button controls the backlight and snooze function for alarms. The 'SET' button is used for configuration, and 'CHANNEL/+' for navigating channels or increasing values.

4.2 Adjustable Backlight
The console features a 3-level adjustable backlight. When powered by the adapter, the backlight can remain on. When battery-powered, press the 'SNOOZE/LIGHT' button for 2 seconds to temporarily activate the backlight.

4.3 Connecting to Wi-Fi
To connect your weather station to Wi-Fi:
- Ensure the console is plugged into the power adapter. Connect to a 2.4 GHz band router.
- When the console is first powered on, or after pressing and holding the 'MIN/MAX' button for three seconds in normal mode, the Wi-Fi icon will flash, indicating WAP (wireless access point) mode.
- Use a PC, phone, or tablet to connect to the 'WeatherHome-xxx' Wi-Fi network.
- Once connected, open a web browser and enter the provided IP address (refer to the full manual for the specific IP) into the address bar to access the console's web interface.
- Follow the on-screen instructions to complete the Wi-Fi setup.

4.4 Connecting to Weather Underground/Weathercloud
After Wi-Fi setup, you can transmit data to online weather services:
- Weathercloud: Register at Weathercloud.com, log in, and add a new weather station device. Select 'FT Series' as the model and fill in the required information. Record the Weathercloud ID and Key.
- Weather Underground: Register at Wunderground.com, log in, and navigate to 'My Profile' > 'Member Settings' > 'Update home location'. Add a new device, select 'others' for hardware, and complete the information. Record the Station ID and Station Key.
- Enter these IDs and Keys into the console's web interface during Wi-Fi setup to enable data synchronization. The console can then synchronize time with these services.
4.5 Weather Forecast
The console provides a weather forecast for the next 24 to 48 hours, based on barometric pressure changes. Animated icons display sunny, cloudy, partly cloudy, and rainy conditions.

5. Maintenance
5.1 Cleaning
Regularly clean the outdoor sensor, especially the rain collector and wind cups, to ensure accurate readings. Use a soft, damp cloth. Avoid abrasive cleaners.
5.2 Battery Replacement
Replace batteries in both the outdoor sensor (3 AA) and indoor console (3 AAA) annually or when low battery indicators appear. Ensure correct polarity.
6. Troubleshooting
- No outdoor sensor data: Check outdoor sensor batteries. Ensure the sensor is within the wireless transmission range (up to 4920ft in open air). Verify no major obstructions between the sensor and console. Re-pair the sensor and console if necessary (refer to the full manual for pairing instructions).
- Wi-Fi connection issues: Ensure the console is powered by the adapter. Confirm you are connecting to a 2.4 GHz Wi-Fi network. Double-check Wi-Fi password. If the Wi-Fi icon is not flashing, press and hold the 'MIN/MAX' button for three seconds to enter WAP mode.
- Inaccurate readings: Ensure the outdoor sensor is mounted in an open area, away from heat sources or obstructions that could affect wind, rain, or temperature readings. Clean the rain collector and wind sensors.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NICETYMETER |
| Model Number | FT-0370L |
| Display Type | DIGITAL |
| Power Type | Solar Powered |
| Use | Household |
| Is Smart Device | Yes |
| Temperature Range (Indoor) | 32 to 140°F (0 to 60°C), Accuracy: ±2°F |
| Temperature Range (Outdoor) | -40 to 140°F (-40 to 60°C), Accuracy: ±2°F |
| Humidity Range | 10 to 99 %RH, Accuracy: ±5% |
| Rainfall Range | 0 to 9999mm (0 to 393.6 inches), Accuracy: <15mm: ±1 mm, >15mm: ±7% |
| Wind Speed Range | 0 to 50 m/s (0 to 112 mph), Accuracy: <10 m/s: ±0.3m/s, >10m/s: ±10% |
| Wind Direction Range | 0 to 360°, Accuracy: ±10° (16 point compass) |
| UV Index | 1 to 15, Accuracy: ±1 |
| Sunlight | 0 to 200,000 lux, Accuracy: ±15% |
| Barometric Pressure Range | 300 to 1100 hPa (8.86 to 32.5 InHg), Accuracy: ±3 hPa |
| Wireless Frequency (LoRa) | 433 MHz (Europe), 915 MHz (USA) |
| Wireless Range | Up to 4920ft (1500m) depending on home construction materials |
| Transmitter Interval | 16 seconds |
| Connectivity Technology | Wi-Fi |
| Web & Mobile App | Weather Underground + WeatherCloud |
| Console Display Size | 7.3 inches |
| Battery Included | No (for sensor and console backup) |
| High-concerned chemical | None |
| Certification | CE, FCC |
| Origin | Mainland China |
8. User Tips
For optimal performance and accurate readings, ensure the outdoor sensor is mounted in an open area, away from direct sunlight on the temperature/humidity sensor (the radiation shield helps, but extreme direct sun can still affect it), and clear of obstructions for wind and rain. Regularly check the solar panel for cleanliness to ensure efficient charging of the backup batteries.
9. Warranty and Support
For technical support, warranty information, or service inquiries, please contact NicetyMeter customer service. Refer to the product packaging or the official NicetyMeter website for contact details.