VGETTING Fog Lights for Nissan NAVARA NP300, X-trail Rogue, Kicks, Juke F16 MK2

Contents

VGETTING Fog Lights User Manual

Model: Fog Lights for Nissan NAVARA NP300, X-trail Rogue, Kicks, Juke F16 MK2

Brand: VGETTING

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VGETTING Fog Lights. Designed to enhance visibility and safety in adverse weather conditions, these fog lights are compatible with specific Nissan models and are available in both Halogen and LED variants. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Product Compatibility (Fitments)

These fog lights are designed to fit the following Nissan vehicle models:

  • Nissan NAVARA NP300: 2020, 2021, 2022
  • Nissan X-trail Rogue: 2021, 2022, 2023
  • Nissan Kicks: 2021, 2022
  • Nissan Juke F16 II/MK2: 2019, 2020, 2021, 2022, 2023

Please verify your vehicle's make, model, and year to ensure compatibility before proceeding with installation.

VGETTING Fog Lights installed on a Nissan Kicks
Figure 1: VGETTING Fog Lights installed on a Nissan Kicks, demonstrating their appearance and illumination.

Product Features

  • 100% Brand new and high quality construction.
  • Elaborate and easy installation design.
  • Shockproof, dustproof, waterproof (IP67 rated), and corrosion resistant.
  • High quality fog light output with no pollution, no noise, and no electronic interference.
  • Longer lifespan of up to 50,000 hours, ensuring minimal maintenance costs.
  • Improves driving safety by allowing your vehicle to be seen at much further distances.
IP67 Waterproof features of the fog lights
Figure 2: Illustration of the IP67 waterproof rating, highlighting durability and long life.

Specifications

FeatureDescription
Brand NameVGETTING
Item TypeFog Lamp Assembly
Bulb TypeHalogen / LED
MaterialABS, LED
Voltage12 V
Lumens3400LM
Item Weight0.4kg
Lens ColourClear
Waterproof RatingIP 67
Lifespan50,000 Hours
Special FeaturesSuper bright, long lifespan, waterproof fog lights
OriginMainland China
Dimensions of the fog light unit
Figure 3: Approximate dimensions of the fog light unit: 4.33 inches in height and 3.54 inches in width.

Installation Guide

The VGETTING Fog Lights are designed for easy, plug-and-play, non-destructive installation. However, professional installation is recommended if you are unfamiliar with automotive electrical systems.

Before You Begin:

  1. Ensure your vehicle is turned off and the ignition key is removed.
  2. Disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
  3. Gather necessary tools (e.g., screwdriver, wrench, trim removal tools).

Installation Steps:

  1. Locate Existing Fog Light Area: Identify the fog light housing on your vehicle's front bumper. Depending on your vehicle model, you may need to remove some bumper trim or access panels.
  2. Remove Old Fog Lights (if applicable): If replacing existing fog lights, carefully unclip or unscrew them from their housing. Disconnect the wiring harness.
  3. Connect New Fog Lights: The VGETTING Fog Lights feature a standard plug-and-play connector. Align the connector from the new fog light with your vehicle's existing wiring harness and push firmly until it clicks into place.
  4. Secure New Fog Lights: Insert the new fog lights into the designated housing. Ensure they are properly aligned and secure them using any clips or screws provided or previously removed.
  5. Repeat for Other Side: Follow the same steps for the fog light on the opposite side of the vehicle.
  6. Reconnect Battery: Once both fog lights are securely installed and connected, reconnect the negative terminal of your vehicle's battery.
  7. Test Functionality: Turn on your vehicle and test the fog lights to ensure they are working correctly.
Easy installation with standard plug and play connector
Figure 4: The fog light features a standard plug-and-play connector for non-destructive installation.
Before and after installation comparison of fog lights
Figure 5: Visual comparison of the vehicle's front bumper before and after the installation of the VGETTING Fog Lights.

Product Variants:

The fog lights are available in Halogen and LED variants. Ensure you have the correct type for your preference and vehicle's electrical system.

Halogen fog light details: PC lens, Halogen bulb, ABS housing
Figure 6: Detailed view of the Halogen fog light, showing its PC lens, Halogen bulb, and ABS housing.
LED fog light details: 12V 10W, Optical Lens, Aluminum Cooling Design
Figure 7: Detailed view of the LED fog light, featuring 12V 10W power, an optical lens, and an aluminum cooling design.

Operating Instructions

VGETTING Fog Lights operate in conjunction with your vehicle's existing lighting system. Refer to your vehicle's owner's manual for specific instructions on how to activate your fog lights.

General Operation:

  1. Turning On: Typically, fog lights are activated via a switch on your vehicle's dashboard or a control stalk near the steering wheel. They are usually designed to operate when your low beam headlights are on.
  2. Turning Off: Deactivate the fog lights using the same switch or control stalk.
  3. Optimal Use: Use fog lights in conditions of reduced visibility such as fog, heavy rain, snow, or dust storms. They are designed to provide a wide, low beam of light to illuminate the road surface directly in front of your vehicle, helping you see the road and be seen by other drivers.
Halogen fog light beam pattern showing ground scattering and penetrating power
Figure 8: Halogen lighting effect demonstrating ground scattering and high penetrating power for improved visibility.
LED fog light beam patterns
Figure 9: Various beam patterns produced by the LED fog lights, illustrating their illumination capabilities.
Video 1: A short demonstration showcasing the VGETTING Fog Lights, including product display and lighting effects.

Maintenance

VGETTING Fog Lights are designed for low maintenance. Regular care will help ensure their optimal performance and appearance.

  • Cleaning: Clean the lens and housing regularly with a soft cloth and mild automotive cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the lens or finish.
  • Inspection: Periodically inspect the fog lights for any signs of damage, loose connections, or corrosion. Ensure the mounting is secure.
  • Bulb Replacement (Halogen only): For Halogen models, if a bulb burns out, replace it with a bulb of the same type and wattage (e.g., H16 12V 19W). Always handle new bulbs by their base to avoid touching the glass, as oils from your skin can cause premature failure. LED models typically have integrated LEDs that are not user-replaceable.

Troubleshooting

If you encounter issues with your VGETTING Fog Lights, refer to the following common problems and solutions:

  • Fog Lights Not Turning On:
    • Check the vehicle's fuse box for a blown fuse related to the fog lights.
    • Ensure all electrical connections are secure and properly seated.
    • Verify that your vehicle's headlights (usually low beams) are on, as fog lights often require them to be active.
    • For Halogen models, check if the bulb is burnt out and replace if necessary.
  • One Fog Light Not Working:
    • Check the specific bulb (for Halogen) or wiring connection for that individual light.
    • Inspect for any visible damage to the light unit or wiring.
  • Flickering or Dim Lights:
    • Check for loose wiring connections or corrosion at the terminals.
    • Ensure the vehicle's battery voltage is stable and sufficient.
  • Moisture Inside Lens:
    • Small amounts of condensation can occur due to temperature changes and usually dissipate.
    • If excessive moisture or water accumulation is present, check for cracks in the housing or improper sealing. Re-seal if possible or consider replacement.

If these steps do not resolve the issue, it is recommended to consult a qualified automotive technician.

User Tips

  • Aiming: After installation, ensure your fog lights are properly aimed. They should project a low, wide beam without blinding oncoming traffic. Consult a professional for proper aiming if unsure.
  • Regular Checks: Periodically check the functionality of your fog lights, especially before driving in conditions where they might be needed.
  • LED vs. Halogen: If you have the LED variant, appreciate its longer lifespan and often brighter, whiter light output compared to traditional Halogen bulbs.

Warranty and Support

For detailed warranty information and customer support, please refer to the official VGETTING product page or contact the seller directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download at: VGETTING Fog Lights PDF Manual

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.