ANCEL AD310BT Bluetooth OBD2 Automotive Scanner User Manual

1. Introduction

The ANCEL AD310BT is a versatile automotive diagnostic tool that combines the functionalities of an OBD2 scanner and a battery tester. It allows users to read and clear engine fault codes, view live data, perform various diagnostic tests, and check battery health directly from their smartphone via Bluetooth. This manual provides detailed instructions for setting up, operating, and maintaining your AD310BT device.

Figure 1: ANCEL AD310BT device and smartphone app interface.

2. Setup and Connection

2.1 Device Connection

1. Locate your vehicle's OBD2 port. This is typically found under the dashboard on the driver's side.
2. Plug the ANCEL AD310BT device firmly into the OBD2 port. The device will power on automatically.

2.2 App Installation and Bluetooth Pairing

1. Download the official "Ancel APP" from your smartphone's app store. It is available for both iOS (App Store) and Android (Google Play).
   

   Figure 2: Download the Ancel APP from App Store or Google Play.
2. Enable Bluetooth on your smartphone.
3. Open the Ancel APP. The app will automatically search for and connect to the AD310BT device via Bluetooth. Follow any on-screen prompts to complete the pairing process.
4. Once connected, the app will display "Device is connected" or similar status.

3. Operating Instructions

The ANCEL AD310BT offers two primary modes of operation: direct OBDII mode via the device screen and Bluetooth mode via the Ancel APP.

3.1 OBDII Mode Functions (Device Screen)

Use the physical buttons (Up, Down, Enter, Exit) on the AD310BT device to navigate the menu and perform the following functions:

• Read Codes: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's computer.
• Erase Codes: Clears DTCs from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL).
• Data Stream: Displays real-time data parameters from the vehicle's sensors.
• View Freeze Frame Data: Shows a snapshot of vehicle operating conditions at the time a fault code was set.
• I/M Monitor Readiness Test: Checks the status of emission-related diagnostic monitors.
• Vehicle Information: Displays vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
• EVAP System Test (Evap Leak Test): Initiates a test of the evaporative emission control system.
• DTC Lookup: Provides definitions for generic and manufacturer-specific trouble codes.

Supported Languages: English, French, Spanish, German, Russian, Finnish, Dutch, Portuguese.

Figure 3: ANCEL AD310BT device screen displaying the diagnostic menu.

3.2 Bluetooth Mode Functions (Ancel APP)

The Ancel APP provides an enhanced user experience with additional features and a graphical interface.

Figure 4: Ancel APP main menu showing available functions.

Core Diagnostic Functions:

• Read Codes: Access and display current, pending, and permanent DTCs.
• Erase Codes: Clear all stored DTCs and reset emission monitors.
• Data Stream: View live sensor data in numerical or graphical format.
• Views Freeze Frame Data: Review critical vehicle parameters recorded when a fault occurred.
• I/M Monitor Readiness Test: Check if all emission systems are ready for inspection/maintenance testing.
  

  Figure 5: I/M readiness test results displayed on the Ancel APP.

• Vehicle Information: Retrieve VIN, CALID, and CVN.
• EVAP System Test: Perform tests on the evaporative emission control system.
• O2 Sensor Test: Monitor and test the functionality of oxygen sensors.
• On-Board Monitoring Test: Access results of on-board diagnostic monitoring tests for specific components/systems.

Additional APP Functions:

• Performance Testing: Evaluate vehicle performance metrics.
• Trip Analysis: Analyze driving data for efficiency and performance.
• Dashboard: Customizable display of live data parameters.
• BAT Check (Battery Tester): Test your car battery's voltage and health.
  

  Figure 6: Battery voltage check using the Ancel APP.
• Flashlight Functions: Utilize your phone's flashlight for convenience.
• Help Function: Access in-app guides and explanations.
• Report Function: Generate and save diagnostic reports (Vehicle Info and All DTCs).
• Feedback Function: Send operation logs and feedback to ANCEL support.

Supported Languages: Chinese, English, German, Spanish, French, Italian.

Figure 7: Wireless diagnostic capabilities of the ANCEL AD310BT.

4. Maintenance

4.1 Software Updates

The ANCEL AD310BT supports lifetime free software updates. Ensure your device and app are always running the newest software version for optimal performance and compatibility with the latest vehicle models and diagnostic protocols. Check the Ancel APP regularly for update notifications.

4.2 General Care

• Keep the device clean and free from dust and moisture.
• Store the device in a cool, dry place when not in use.
• Avoid dropping the device or subjecting it to strong impacts.
• Do not attempt to disassemble or modify the device, as this will void the warranty.

5. Troubleshooting

If you encounter issues with your ANCEL AD310BT, refer to the following common troubleshooting tips:

• Device not powering on: Ensure the device is securely plugged into the vehicle's OBD2 port. Check the vehicle's battery for sufficient power.
• App not connecting via Bluetooth: Verify Bluetooth is enabled on your smartphone. Restart both the app and the AD310BT device. Ensure no other devices are actively connected to the scanner.
• Unable to read codes: Confirm the vehicle's ignition is in the ON position (engine off or running, depending on the test). Ensure the vehicle is OBD2 compliant (most vehicles from 1996 onwards in the US, and newer in other regions).
• Engine Light remains on after clearing codes: Some fault codes may require multiple drive cycles to clear, or the underlying issue has not been resolved. Address the root cause of the fault before attempting to clear codes again.
  

  Figure 8: Understanding why the engine light turns on and how to diagnose it.

• Inaccurate battery test results: Ensure the battery clamps (if using an external battery tester, though AD310BT uses OBD2 for battery check) are clean and securely connected. The AD310BT's BAT check function is primarily for voltage detection for 12V vehicles and results are for reference.
  

  Figure 9: Battery testing interface in the Ancel APP.

For further assistance, utilize the "Help Function" or "Feedback Function" within the Ancel APP.

6. Specifications

7. Warranty and Support

The ANCEL AD310BT comes with a commitment to quality and customer satisfaction.

7.1 Software Updates

Enjoy lifetime free software updates for your ANCEL AD310BT. Regularly check the Ancel APP for the latest updates to ensure optimal performance and compatibility.

7.2 Technical Support

For any technical inquiries, operational issues, or feedback, please use the dedicated "Help Function" and "Feedback Function" within the Ancel APP. This allows you to directly communicate with ANCEL support and send operation logs for efficient troubleshooting.

7.3 User Tips

• Official App: Always ensure you download the official "Ancel APP" from your device's respective app store (Apple App Store for iOS, Google Play Store for Android) to guarantee compatibility and access to all features.
• Vehicle Compatibility: While the AD310BT is broadly compatible with OBD2 vehicles, some advanced functions or specific vehicle models might have limitations. Refer to the app's help section or ANCEL support for detailed compatibility information.
• Engine Off/On: For most diagnostic functions, the vehicle's ignition should be in the 'ON' position. For some tests, like EVAP system tests, the engine might need to be running or at specific operating conditions. Always follow the prompts on the device or app.