1. Introduction
This SUMRY HGP-PRO SERIES 5.5KW 48V 220V Solar Inverter is a multi-function inverter/charger, combining the functions of an inverter, MPPT solar charger, and battery charger. It is designed to offer uninterruptible power support in a portable size. Its comprehensive LCD display provides user-configurable and easy-to-access button operations for settings such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Key Features:
- Pure sine wave output.
- Capable of running without a battery in sunny conditions.
- Built-in MPPT solar controller with 110A maximum solar charging current.
- Wide PV input range (120-500Vdc).
- Programmable supply priority for PV, battery, or grid.
- User-configurable input voltage range for home appliances and personal computers via LCD setting.
- User-configurable battery charging current based on applications via LCD setting.
- User-configurable AC/Solar Charger priority via LCD setting.
- Compatible with mains voltage or generator power.
- Auto restart function when AC power recovers.
- Comprehensive protection features: Overload, Over temperature, Short circuit, High/Low Voltage, Battery, Overcurrent, Anti Reverse, Power Failure.
- Smart battery charger design for optimized battery performance.
- Cold start function.
- Optional WIFI monitoring function (requires separate module).
- Parallel operation capability for up to 6 units.

2. Safety Precautions
Always observe the following safety guidelines when installing, operating, or maintaining the inverter:
- Ensure proper grounding of the inverter.
- Do not expose the inverter to rain, snow, or liquids of any type.
- Do not disassemble the inverter. Refer all servicing to qualified personnel.
- Ensure adequate ventilation around the inverter to prevent overheating.
- Verify all wiring connections are secure and correct before powering on.
- Use appropriate circuit breakers and fuses as recommended.
Integrated Protections:

3. Setup and Installation
Basic System Architecture:
The inverter integrates into a system that can include solar modules, a generator, a utility grid, and battery packs to power home appliances. Air switches are crucial for safe connection and disconnection of components.

Rear Panel Connections:
Familiarize yourself with the connection ports on the rear panel of the inverter before installation.

Parallel Operation:
This inverter supports parallel operation of up to 6 units to increase total power output. The parallel kit is built-in for models with this function, so no separate purchase or installation is required for the kit itself.

Battery Compatibility and Wiring:
The inverter is compatible with multiple battery types, including Flooded (FLD), Gel, Lithium-iron phosphate (LiFePO4), Lithium-ion, AGM/Sealed (SLD), and user-customized batteries. Ensure to use the recommended cable and terminal sizes for optimal performance and safety.

4. Operating Instructions
LCD Display and Function Keys:
The inverter features a comprehensive LCD display, LED indicators, and function keys for monitoring and configuration.

Configurable Settings:
The inverter allows users to configure various parameters via the LCD display:
- Input Voltage Range: Adjust for home appliances or personal computers.
- Battery Charging Current: Set based on your battery type and capacity.
- AC/Solar Charger Priority: Choose whether AC or solar power takes precedence for charging.
WIFI Monitoring (Optional):
For remote monitoring and control, an optional WIFI module can be connected to the inverter. This allows you to manage your system via a smartphone app (available on APP store/Google Play).

5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SUMRY solar inverter.
- Cleaning: Keep the inverter's exterior clean and free from dust and debris. Use a dry, soft cloth. Do not use liquid cleaners.
- Ventilation: Ensure that the ventilation openings are not blocked. Proper airflow is critical to prevent overheating.
- Connections: Periodically check all electrical connections (PV input, battery input, AC input/output) for tightness and signs of corrosion. Loose connections can lead to power loss or overheating.
- Environment: Ensure the inverter is installed in a dry, well-ventilated area, away from direct sunlight and corrosive substances.
6. Troubleshooting
The inverter is equipped with various protection mechanisms and diagnostic indicators to help identify and resolve issues.
LED Indicators and Fault Messages:
Refer to the LCD display and LED indicators (Figure 7) for immediate status and fault messages:
- AC/INV LED (Green): Solid On indicates output powered by utility in Line mode. Flashing indicates output powered by battery or PV in battery mode.
- CHG LED (Green): Solid On indicates battery is fully charged. Flashing indicates battery is charging.
- FAULT LED (Red): Solid On indicates a fault in the inverter. Flashing indicates a warning condition.
Common Issues and Solutions:
- Overload Protection: If an overload occurs, the inverter will shut down. Reduce the load connected to the inverter and restart the unit.
- Over Temperature Protection: If the inverter overheats, it will shut down. Ensure proper ventilation and clear any obstructions from the cooling vents. Allow the unit to cool down before restarting.
- Short Circuit Protection: In case of a short circuit at the output, the inverter will shut down. Disconnect the load, check for short circuits in the wiring, and then restart.
- High/Low Voltage Protection: If input voltage (AC or battery) is outside the acceptable range, the inverter will protect itself. Check the input voltage source and battery status.
- Battery Protection: Issues related to battery voltage (over-discharge, over-charge) will trigger protection. Check battery connections and charge level.
- Power Failure Protection: The inverter will manage power flow during utility power failures, switching to battery/solar power.
7. Specifications
The following table outlines the technical specifications for the SUMRY 5.5KW Solar Inverter (Model HGP5500W):

| Parameter | Value |
|---|---|
| Inverter Model | HGP5500W |
| Rated Power | 5500W / 5500VA |
| Output Voltage | 230VAC ± 5% |
| Output Frequency | 50/60Hz auto sensing |
| Waveform | Pure Sine Wave |
| Battery Voltage | 48VDC |
| Max. Charge Current | 80A (AC Charger) / 110A (Solar Charger) |
| Max. PV Array Power | 6000W |
| MPPT Voltage Range | 120-500VDC |
| Max. MPPT Efficiency | 98% |
| Storage Temperature | -15°C to 60°C |
| Dimensions (D*W*H) | 472*298*129mm |
| Net Weight | 9.5kg (approx. 12kg packaged) |
| Communication Interface | RS485/RS232 (standard), LCD remote, WIFI (Optional) |
| Certification | CE, FCC, RoHS |


8. User Tips
- Solar Panel Voltage: For optimal operation, ensure your solar panel input voltage is higher than 150V to properly start up the inverter.
- Parallel Function: If you have purchased a model with the parallel function, the necessary parallel kit is already built into the unit. There is no need to buy or install it separately.
- WIFI Module: The WIFI monitoring function is optional. If you wish to use it, you will need to purchase the WIFI module separately and connect it to the inverter.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt and product serial number (found on the inverter's label, see Figure 10) handy when contacting support.