Introduction
The Liectroux G7 Robot Vacuum Cleaner is an advanced cleaning solution designed to provide a hands-free cleaning experience. Equipped with a powerful 6500Pa suction, precise laser navigation, and a long-lasting 5200mAh battery, it offers comprehensive cleaning for various floor types. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Liectroux G7 robot vacuum.
Figure 1: Liectroux G7 Robot Vacuum Cleaner and Self-Empty Station
Package Contents
Please check the box for the following items:
- 1 x Main machine (Robot Vacuum)
- 1 x Dust collector (Self-empty station)
- 2 x Side brushes
- 1 x Cleaning brush
- 1 x 2-in-1 water tank and dust box
- 2 x Dust bags (1 pre-installed in the self-empty station, 1 spare)
- 2 x HEPA filters (1 pre-installed in the device, 1 spare)
- 2 x Mop cloths
- 1 x Mop board
- 1 x Adapter
- 1 x User Manual
Setup
- Unpack the Device: Carefully remove all components from the packaging.
- Install Side Brushes: Snap the side brushes onto their designated posts on the underside of the robot until they click into place.
- Place the Self-Empty Station: Position the self-empty station against a wall in an open area, ensuring there is at least 0.5 meters of clear space on either side and 1.5 meters in front. Plug the adapter into the station and a power outlet.
- Initial Charging: Place the robot vacuum onto the charging contacts of the self-empty station. Ensure the robot is properly docked and charging. For first-time use, fully charge the robot (approximately 300 minutes).
- Install Water Tank/Dust Box: If using the mopping function, fill the 2-in-1 water tank and dust box with clean water and attach a mop cloth to the mop board. Insert the assembly into the robot.
- Download and Connect App: Download the Liectroux G7 app from your smartphone's app store. Follow the in-app instructions to connect your robot vacuum to your home Wi-Fi network. This will enable advanced features like mapping, scheduling, and remote control.
Figure 2: Robot Vacuum docked with Self-Empty Station
Operating Instructions
Cleaning Modes and Features:
- LDS Laser Navigation: The robot uses a new LDS laser scanning system and SLAM algorithm for accurate mapping of your home environment, ensuring efficient and stable cleaning paths.
- Automatic Dust Collection: After each cleaning cycle, the robot automatically returns to the self-empty station to empty its dust box into a 3L dust bag. This provides up to 60 days of hands-free dust disposal.
- Y-shaped Mopping: The G7 employs a unique Y-shaped back-and-forth mopping pattern for deeper and more thorough wet cleaning. The 300ml intelligent electric control water tank allows for three levels of water adjustment.
- Carpet Recognition: Equipped with an AI ultrasonic carpet recognition sensor, the robot automatically increases suction power when on carpets and reduces it on hard floors.
- Anti-Collision & Anti-Falling: Advanced sensors prevent the robot from colliding with obstacles and falling down stairs.
- Twining-Proof & Easy Climbing: Designed to minimize tangling with cables and capable of easily climbing over small obstacles.
Figure 3: Robot Vacuum's Obstacle Avoidance and Climbing Features
App Remote Control:
The Liectroux G7 app provides comprehensive control and customization options:
- Whole House Cleaning: Initiate a full cleaning cycle of your mapped home.
- Area Cleaning: Specify particular rooms or zones for targeted cleaning.
- Restricted Areas/Virtual Walls: Define no-go zones or virtual walls on the map to prevent the robot from entering certain areas.
- Timing Appointments: Schedule cleaning times for specific days or routines.
- Vacuum Power Adjustment: Manually adjust the suction power to suit different cleaning needs.
- Multi-layer Map Management: Store and manage maps for multiple floors or different layouts.
Figure 4: App Remote Control for Visual Cleaning and Customization
Voice Assistant Compatibility:
The Liectroux G7 is compatible with popular voice assistants like Amazon Alexa and Google Home, allowing for convenient voice commands to start or stop cleaning.
Figure 5: Voice Assistant Integration
Automatic Recharging and Resume:
If the robot's battery runs low during a cleaning cycle, it will automatically return to the charging station. Once fully charged, it will resume cleaning from where it left off.
Figure 6: Automatic Recharging and Cleaning Resumption
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum.
Robot Vacuum:
- Emptying the 2-in-1 Dust Box: Although the self-empty station handles most dust, periodically check and manually empty the robot's internal 300ml dust box, especially if not using the self-empty feature or if cleaning very dusty areas.
- Cleaning Filters: Remove and clean the HEPA filter and primary filter regularly. Tap off loose debris and rinse with water if necessary (ensure completely dry before re-installing).
- Cleaning Side Brushes: Remove any hair or debris tangled around the side brushes. Replace worn brushes as needed.
- Cleaning Main Brush: Use the provided cleaning tool to remove hair and debris from the main V-shaped roller brush.
- Cleaning Sensors: Wipe all sensors (cliff sensors, anti-collision sensors, laser navigation sensor) with a clean, dry cloth to ensure proper function.
- Cleaning Mop Cloths: Remove and wash mop cloths after each mopping session.
Self-Empty Station:
- Replace Dust Bag: The 3L dust bag in the self-empty station should be replaced when full (typically every 60 days, depending on usage).
- Clean Dust Collection Port: Periodically check and clean the dust collection port on the station and the robot to ensure unobstructed airflow.
Figure 7: Integrated Dust Box and Water Tank for Mopping, Sweeping, and Vacuuming
Figure 8: Automatic Dust Collection System Features
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or respond. | Low battery; Power switch off; Robot stuck. | Charge the robot; Ensure power switch is ON; Clear any obstructions. |
| Robot cannot find charging station. | Charging station obstructed; Station unplugged; Robot too far. | Ensure clear path to station; Plug in station; Manually place robot near station. |
| Poor cleaning performance. | Dust box full; Brushes tangled; Filters clogged. | Empty dust box; Clean main/side brushes; Clean or replace filters. |
| Robot gets stuck frequently. | Too many obstacles; Loose cables; Dark surfaces (cliff sensors). | Clear floor of clutter; Secure cables; Use virtual walls for problematic areas. |
| App connection issues. | Incorrect Wi-Fi password; Router too far; App not updated. | Verify Wi-Fi credentials; Move robot closer to router; Update app to latest version. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LIECTROUX |
| Type | Robot Vacuum Cleaner |
| Model | G7 |
| Color | Black |
| Material | ABS |
| Voltage | 14.4V |
| Power | 28W |
| Battery | 5200mAh Lithium Battery |
| Water Tank Capacity | 300ml |
| Dust Box Capacity (Robot) | 300ml |
| Dust Bag Capacity (Station) | 3L (approx. 60 days capacity) |
| Suction Power | 6500Pa |
| Connection Method | WIFI connection |
| Charging Time | About 300 minutes |
| Cleaning Time | About 180 minutes |
| Charging Type | Automatic charging / Manual charging |
| Product Size (L x W x H) | 35 x 35 x 9.8 cm |
| Product Weight | 7.03 kg |
User Tips
- For optimal mopping results, pre-wet the mop cloth before attaching it to the mop board.
- Regularly check for and remove any small objects or cables from the floor before cleaning to prevent the robot from getting stuck.
- If you have multiple floors, consider purchasing additional charging stations or manually moving the robot and station to each floor as needed, utilizing the multi-layer map management feature in the app.
- To maintain strong suction, ensure the dust bags in the self-empty station are replaced promptly when full.
Warranty and Support
The Liectroux G7 Robot Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including coverage duration and claim procedures. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the seller or authorized service center.
