Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your DownyPaws 4L Automatic Pet Food Feeder. Designed for convenience and pet health, this smart feeder allows you to manage your pet's meal schedule remotely, ensuring they are fed consistently and appropriately.
Product Overview
Key Features
- 4 L capacity, suitable for cats (approx. 12 days of food) and small to medium dogs (approx. 4 days of food).
- WiFi remote feeding control via a dedicated mobile application.
- Personalized feeding schedule with customizable times and portions (up to 15 meals/day, 1-20 portions/meal).
- Anti-clog design with auto-reversal mechanism to prevent food jamming.
- Secure twist-lock lid to maintain food freshness and prevent pet access.
- Built-in infrared sensor for food shortage detection and smart notifications.
- 10-second personalized meal call recording.
- Durable stainless steel food bowl for healthy and hygienic feeding.
- Dual power supply: 5V USB adapter and 3x D-cell batteries (backup).
- Detachable design for easy and thorough cleaning.
What's in the Box
- 1 x DownyPaws WiFi Automatic Pet Feeder
- 1 x Stainless Steel Bowl
- 1 x 5V Power Adapter
- 1 x Desiccant Bag
- 1 x User Guide
Setup Guide
1. Unpacking and Assembly
- Carefully remove all components from the packaging.
- Place the stainless steel bowl into the designated slot at the base of the feeder.
- Ensure the food tank and lid are securely attached.

2. Power Supply
- Connect the provided 5V power adapter to the feeder and a wall outlet.
- For backup power, insert 3 alkaline D-cell batteries (not included) into the battery compartment at the bottom of the feeder. This ensures uninterrupted feeding during power outages.

3. Filling the Food Tank
- Open the secure twist-lock lid.
- Place the desiccant bag into its designated slot under the lid to maintain food freshness. Remember to change it every half month.
- Fill the tank with dry pet food only. Ensure kibble size is between 2-15mm in diameter.
- Close the lid securely by twisting it until locked.

4. App Installation and WiFi Connection
- Download the dedicated "WiFi Pet Feeder" application from your smartphone's app store (iOS or Android). Refer to the included User Guide for specific app name and QR codes if available.
- Open the app and follow the on-screen instructions to connect the feeder to your 2.4GHz WiFi network. (Note: The feeder only supports 2.4GHz WiFi networks).

Operating Instructions
1. Scheduling Meals via App
- Open the "WiFi Pet Feeder" app on your smartphone.
- Navigate to the feeding schedule section.
- Set desired feeding times (up to 15 meals per day).
- For each meal, specify the number of portions (1-20 portions, where each portion is approximately 7-9 grams).
- Save your feeding schedule. The feeder will automatically dispense food according to your settings.
- You can track the feeding records for the last 7 days within the app.
2. Manual Feeding
- You can manually dispense food at any time using the app's manual feed function.
- Alternatively, use the manual control panel buttons on the feeder itself for immediate dispensing.
3. Recording a Meal Call
- Use the app to record a voice message (up to 10 seconds) that will play at each scheduled feeding time. This helps to call your pet to their meal.

4. Food Shortage Notifications
- The built-in infrared sensor monitors the food level. If the food in the tank is low or empty, you will receive a notification on your smartphone via the app, reminding you to refill.

Maintenance
Cleaning Instructions
- The tank lid, food tank, tank base, stainless steel food bowl, and the anti-clog rotor are all detachable for easy cleaning.
- Wash these components with mild soap and water, then rinse thoroughly and dry completely before reassembly.
- Important Note: The main engine part of the feeder is NOT washable. Do not immerse it in water or expose it to excessive moisture. Clean the exterior of the main engine with a damp cloth.

Desiccant Bag Replacement
- For optimal food freshness, replace the desiccant bag every half month.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder not dispensing food. | Food jamming, empty tank, power issue, incorrect schedule. | Check food level. Ensure kibble size is 2-15mm. Verify power connection or battery level. Check app schedule. The anti-clog rotor should automatically reverse if food is stuck. |
| No app connection or control. | Incorrect WiFi network, app issues, feeder not powered. | Ensure your router is broadcasting a 2.4GHz WiFi signal. Reconnect the feeder to the app. Check power supply. Restart the app and feeder. |
| Food shortage notification not received. | Sensor malfunction, app notification settings. | Ensure the infrared sensor area is clean. Check app notification settings on your phone. |
| Feeder not working without power cable. | No D-cell batteries installed or batteries are depleted. | Install 3 fresh D-cell alkaline batteries for backup power. The feeder is designed to operate on battery power in case of AC power loss. |
Specifications
| Feature | Detail |
|---|---|
| Capacity | 4 Liters (approx. 12 days for cats, 4 days for dogs) |
| Kibble Size | 2-15mm diameter (dry food only) |
| Power Source | 5V DC Adapter (included), 3x D-size Batteries (not included) for backup |
| Connectivity | 2.4GHz WiFi Network (only) |
| Max Output | 200g |
| Min Output | 50g |
| Time Setting | Yes |
| LCD Display | No |
| Material (Bowl) | Stainless Steel |
| Dimensions (approx.) | Length: 22cm, Width: 21cm, Height: 35cm |
| Weight (approx.) | 2.0 kg |
User Tips
- Always keep fresh D-cell batteries installed as a backup power source to ensure your pet is fed even during power outages.
- Ensure your home WiFi network is 2.4GHz for proper connectivity. If you have a dual-band router, make sure your phone is connected to the 2.4GHz band during setup.
- Regularly check the food level and refill promptly when notified by the app to prevent feeding interruptions.
- For optimal hygiene, clean all detachable parts of the feeder regularly.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the contact details provided in your original purchase documentation or contact the manufacturer directly. Keep your proof of purchase for warranty claims.