1. Introduction
Thank you for purchasing the BlitzWolf BW-WA8 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use and keep it for future reference.
The BW-WA8 is a compact yet powerful portable speaker featuring Bluetooth 5.0 connectivity, a 57mm large driver for ultimate stereo sound, TWS stereo pairing capability, and a rhythm-driven RGB light show. It supports multiple playback modes including Bluetooth, TF card, and AUX input, and has a built-in 1800mAh battery for extended music playback.
2. Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble, repair, or modify the speaker yourself. Contact qualified service personnel if needed.
- Keep the speaker away from water and other liquids. This product is not waterproof.
- Use only the provided USB charging cable or a certified equivalent for charging.
- Do not operate the speaker at excessively high volumes for prolonged periods to prevent hearing damage.
3. Package Contents
Please check the package for the following items:
- 1 x BlitzWolf BW-WA8 Bluetooth Speaker
- 1 x USB Charging Cable
- 1 x User Manual (this document)
4. Product Overview
Figure 4.1: Front view of the BW-WA8 Speaker
Figure 4.2: Top Control Panel with RGB Light
4.1 Controls and Indicators
- Power Button: Press and hold to power on/off. Short press to change RGB light modes.
- Play/Pause Button: Play or pause audio. Answer/end calls.
- Volume Down (-): Decrease volume. Press and hold for previous track.
- Volume Up (+): Increase volume. Press and hold for next track.
- RGB Light Ring: Illuminates with various light effects.
4.2 Ports
Figure 4.3: Input Ports (TF Card, AUX, Type-C)
- TF Card Slot: Insert a MicroSD/TF card for direct audio playback.
- AUX Port: Connect external audio devices via a 3.5mm audio cable.
- Type-C Charging Port: Connect the USB charging cable to charge the speaker.
5. Setup
5.1 Charging the Speaker
- Connect the provided USB charging cable to the Type-C port on the speaker.
- Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will show the charging status. It typically takes 2-3 hours for a full charge.
- Once fully charged, disconnect the charging cable.
Figure 5.1: Battery and Dimensions Overview
5.2 Power On/Off
- To Power On: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt and the RGB lights illuminate.
- To Power Off: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt and the lights turn off.
6. Operating Instructions
6.1 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing light or audible prompt).
- On your mobile device, enable Bluetooth and search for available devices.
- Select "BW-WA8" from the list of devices.
- Once paired, you will hear a confirmation sound, and the speaker's indicator light will become solid.
6.2 TWS Stereo Pairing (True Wireless Stereo)
To achieve superior stereo sound, you can pair two BW-WA8 speakers together.
Figure 6.1: TWS Stereo Pairing Setup
- Ensure both BW-WA8 speakers are powered on and not connected to any Bluetooth device.
- On one of the speakers (this will be the primary speaker), double-press the Power button. The speaker will enter TWS pairing mode.
- The two speakers will automatically search for and connect to each other. You will hear a confirmation tone once connected.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in Section 6.1.
- Audio will now play in stereo through both speakers.
6.3 Playback Modes (TF Card / AUX)
- TF Card Mode: Insert a MicroSD/TF card with audio files into the TF card slot. The speaker will automatically switch to TF card mode and begin playback.
- AUX Mode: Connect an external audio device (e.g., MP3 player, laptop) to the speaker's AUX port using a 3.5mm audio cable. The speaker will automatically switch to AUX mode.
6.4 Music Playback and Volume Control
- Play/Pause: Short press the Play/Pause button.
- Next Track: Press and hold the Volume Up (+) button.
- Previous Track: Press and hold the Volume Down (-) button.
- Volume Up: Short press the Volume Up (+) button.
- Volume Down: Short press the Volume Down (-) button.
6.5 Hands-free Calling
When connected to your phone via Bluetooth:
- Answer Call: Short press the Play/Pause button.
- End Call: Short press the Play/Pause button during a call.
- Reject Call: Press and hold the Play/Pause button for 2 seconds.
6.6 RGB Light Control
Figure 6.2: Rhythm-driven Light Show
Short press the Power button to cycle through different RGB light modes or turn the lights off.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, charge the speaker fully before first use and at least once every three months if not used regularly.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery; Power button not pressed long enough | Charge the speaker; Press and hold the Power button for 3 seconds |
| Cannot pair via Bluetooth | Speaker not in pairing mode; Device Bluetooth off; Too far from device | Ensure speaker is in pairing mode; Turn on Bluetooth on your device; Move speaker closer to device (within 10m) |
| No sound | Volume too low; Incorrect input mode; Device not playing audio | Increase speaker/device volume; Check if in correct mode (BT, TF, AUX); Ensure audio is playing on source device |
| TWS pairing fails | Speakers already connected to other devices; Not in TWS pairing mode | Disconnect speakers from other devices; Ensure both speakers are in TWS pairing mode (double-press Power button on one) |
| RGB lights not working | Lights turned off | Short press the Power button to cycle through light modes |
9. Specifications
Figure 9.1: Key Features Overview
| Feature | Specification |
|---|---|
| Brand | BlitzWolf |
| Model | BW-WA8 |
| Bluetooth Version | 5.0 |
| Output Power | 10W |
| Battery Capacity | 1800mAh (Built-in) |
| Charging Time | 2-3 hours |
| Working Time | Up to 6 hours |
| Driver Size | 57mm Large Driver |
| Audio Crossover | Full-Range |
| Channels | 2 (2.0) |
| Speaker Type | Portable |
| Sound Mode | Hi-Res Sound Mode |
| Input/Output | Bluetooth, TF Card, AUX (Coaxial listed in properties, but not primary interface) |
| Voice Control | No |
| Waterproof | No |
| Support APP | No |
| Intelligent Personal Assistant | None |
| Cabinet Material | Leather (accent) |
| Dimensions (approx.) | 3.9 x 2.7 x 4.1 inches (10 x 6.8 x 10.4 cm) |
| Origin | Mainland China |
10. User Tips
- For the best audio experience, ensure your audio source (phone, tablet) is within 10 meters (33 feet) of the speaker.
- When using TWS pairing, place the two speakers within close proximity to each other for stable connection.
- If experiencing audio dropouts, try moving the speaker away from other wireless devices that might cause interference.
- To maximize battery life, avoid consistently playing music at maximum volume.
11. Warranty and Support
Figure 11.1: After-Sales Service Details
11.1 Warranty
This product comes with a basic 1-month seller's warranty. If the item is found defective within 1 month of receipt, it may be replaced. Please contact the seller for warranty claims and procedures.
11.2 Contact Customer Service
Figure 11.2: Customer Service Working Hours
For any questions or support, please contact the seller directly. Customer service working hours are typically 20:00-04:00 (PST). If you encounter a weekend or holiday, the working time will be postponed to the next business day.
