K&F CONCEPT K254C2+BH-36L

Contents

K&F Concept K254C2+BH-36L Carbon Fiber Tripod Instruction Manual

Model: K254C2+BH-36L

1. Introduction

Thank you for choosing the K&F Concept K254C2+BH-36L Carbon Fiber Tripod. This professional-grade tripod is designed for photographers seeking a lightweight, stable, and versatile support solution for their cameras. Constructed from durable carbon fiber and reinforced synthetic nylon, it offers excellent portability and resilience against various environmental conditions. This manual provides essential information for the proper setup, operation, and maintenance of your tripod to ensure optimal performance and longevity.

2. Safety Information

  • Always ensure all locking mechanisms are securely fastened before mounting your camera or leaving the tripod unattended.
  • Do not exceed the maximum load capacity of 8kg (17.6lbs) to prevent damage to the tripod and your equipment.
  • Be cautious when adjusting leg sections to avoid pinching fingers.
  • Avoid exposing the tripod to extreme temperatures or corrosive substances.
  • When carrying the tripod, ensure it is properly folded and secured to prevent accidental deployment or damage.

3. Package Contents

Please verify that all items are present in your package:

  • 1 x K&F Concept K254C2 Carbon Fiber Tripod
  • 1 x BH-36L Metal Ball Head
  • 1 x Quick Release Plate (Arca-Swiss compatible)
  • 1 x Tripod Carrying Bag
K&F Concept K254C2+BH-36L Tripod and Carrying Bag
Image: K&F Concept K254C2+BH-36L Tripod and Carrying Bag

4. Specifications

FeatureSpecification
Model NumberK254C2+BH-36L
TypeProfessional Tripod
MaterialCarbon Fiber (legs), Reinforced Synthetic Nylon (connecting parts), Aluminum Alloy (ball head)
Max Extended Length1620mm (64 inches)
Folded Length415mm (16.34 inches)
Net Weight (with ball head)1.1kg (2.5lbs)
Max Load Capacity8kg (17.6lbs)
Leg Sections4
Tube Diameter25mm (0.98 inches)
Ball Head ModelBH-36L
Ball Head Diameter36mm (1.4 inches)
Ball Head Height8cm (3.15 inches)
Ball Head Bottom Connection3/8 inch
Camera Screw1/4 inch
Quick Release Plate CompatibilityArca-Swiss
K&F Concept K254C2+BH-36L Tripod with specifications
Image: K&F Concept K254C2+BH-36L Tripod with key specifications
Ball Head BH-36L specifications
Image: Detailed specifications for the BH-36L Ball Head

5. Setup Instructions

  1. Unfolding the Tripod:

    Gently extend the tripod legs from their folded position. Each leg has 4 sections. Unlock the leg locks, extend the sections to your desired height, and then securely lock them. The tripod can be adjusted from a folded length of 415mm to a maximum extended length of 1620mm.

    Tripod height variations
    Image: Illustrates various tripod heights from folded to maximum extension.
  2. Adjusting Leg Angles:

    The tripod legs feature 3 levels of opening angles for versatile positioning on uneven terrain or for different shooting perspectives. Press the leg angle adjustment tab near the top of each leg to change its angle.

    Tripod leg angle adjustment mechanism
    Image: Close-up of the leg angle adjustment mechanism.
  3. Attaching the Ball Head:

    The BH-36L ball head comes pre-attached. Ensure it is securely tightened to the tripod's center column.

  4. Mounting Your Camera:

    Attach the quick release plate to the bottom of your camera using the 1/4 inch screw. Then, slide the quick release plate with your camera into the clamp on the ball head and tighten the locking knob until your camera is securely mounted.

    Quick release plate for camera attachment
    Image: Quick release plate for secure camera attachment.
    Camera mounted on tripod with 1/4 inch screw
    Image: Demonstrates camera mounting using the 1/4 inch screw.

6. Operating Instructions

  1. Adjusting Ball Head Position:

    Loosen the main locking knob on the BH-36L ball head to adjust your camera's angle. Once the desired position is achieved, tighten the knob firmly to secure the camera.

  2. 360° Panoramic Shooting:

    The ball head features a 360-degree panning dial. Loosen the panoramic lock knob (usually a smaller knob at the base of the ball head) to rotate the camera horizontally for panoramic shots. The degree markings on the base assist in precise adjustments. Tighten the knob to lock the panoramic movement.

    Camera on tripod showing 360-degree panning
    Image: Demonstrates 360-degree panoramic shooting capability.
    Close-up of ball head with degree markings for panning
    Image: Close-up of the ball head's panning base with degree markings.
  3. Low Angle Shooting / Inverted Column:

    For extremely low-angle shots or macro photography, the center column can be inverted. Unscrew the center column from the tripod chassis, flip it, and re-attach it. This allows your camera to be positioned very close to the ground.

    Tripod with camera in inverted position for low-angle shooting
    Image: Example of inverted center column for low-angle photography.
    Tripod set up for low-angle shooting
    Image: Another view of the tripod configured for low-angle shooting.
Video: K&F Concept Tripod demonstration, showing setup, stability, and features.

7. Maintenance

  • Cleaning:

    After use, especially in dusty, sandy, or wet environments, wipe down the tripod with a soft, damp cloth. Ensure all leg sections and locking mechanisms are free of debris. The reinforced synthetic nylon material is designed to be waterproof and windproof, making it suitable for outdoor use.

    Tripod in water, demonstrating waterproof and windproof features
    Image: Tripod standing in water, highlighting its durable construction.
  • Lubrication:

    Periodically check the movement of the leg locks and ball head. If they become stiff, apply a small amount of silicone-based lubricant. Avoid oil-based lubricants as they can attract dirt.

  • Storage:

    Store the tripod in its carrying bag in a dry, cool place away from direct sunlight and extreme temperatures.

8. Troubleshooting

  • Tripod instability:

    Ensure all leg sections are fully extended and their locks are securely tightened. Verify that the leg angles are evenly set. Check that the quick release plate and ball head are firmly attached to both the camera and the tripod.

  • Camera movement after locking:

    Tighten the main locking knob on the ball head more firmly. If the issue persists, ensure the quick release plate is properly seated and tightened on the camera and within the ball head clamp.

  • Stiff leg locks or ball head:

    Clean any visible dirt or sand from the mechanisms. If necessary, apply a small amount of silicone lubricant as described in the Maintenance section.

9. User Tips

  • For maximum stability, extend the thicker leg sections first and keep the thinner sections retracted as much as possible.
  • When shooting in windy conditions, consider hanging a weight from the center column hook (if available) to increase stability.
  • Practice quick setup and breakdown of your tripod to be efficient during shoots.

10. Warranty and Support

This K&F Concept tripod comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact the K&F Concept Official Store directly through your purchase platform.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.