SUMRY SP3/3.8KW

Contents

Sumry SP Series Hybrid Solar Inverter User Manual

Model: SP3/3.8KW | Brand: SUMRY

1. Introduction

The Sumry SP Series Hybrid Solar Inverter is a versatile power solution designed for home and office applications. It combines the functions of an inverter, MPPT solar charger, and battery charger to provide uninterruptible power support. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Sumry Hybrid Solar Inverter.

2. Key Features

  • Pure sine wave output for sensitive electronics.
  • Programmable supply priority for PV (Photovoltaic), battery, or grid.
  • High PV input voltage range (55-450VDC).
  • Built-in Max 110A (for 3.8KW & 6.2KW models) MPPT solar charger.
  • Compatible with various battery types, including lithium-ion.
  • Supports BMS communication with lithium batteries.
  • Smart battery charge design to optimize battery life.
  • Comprehensive protections: overload, high temperature, inverter output short circuit.
  • Cold start function.
  • Intelligent fan speed adjustment for efficient cooling.
  • Optional built-in anti-dusk kit for harsh environments.
  • WiFi & GPRS available for iOS and Android monitoring (optional).
Sumry Hybrid Solar Inverter with features highlighted

Image: Sumry Hybrid Solar Inverter showcasing its main features.

3. Technical Specifications

The following table details the technical specifications for the Sumry SP Series Hybrid Solar Inverters. Please refer to your specific model for exact values.

Parameter SP-2200 SP-3200 (3kW) SP-4200 (3.8kW) SP-7000
Rated Power
Rated Power 2200VA/1800W 3200VA/3000W 4200VA/3800W 7000VA/6200W
INPUT
Voltage 230VAC
Selectable Voltage Range 170-280VAC (for personal computers), 90-280VAC (for home appliances)
Frequency Range 50/60Hz (Auto sensing)
OUTPUT
AC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Surge Power 4400VA 6400VA 8400VA 14000VA
Transfer Time 10ms (for personal computers); 20ms (for home appliances)
Wave form Pure Sine Wave
BATTERY & AC CHARGER
Battery Voltage 12VDC 24VDC 24VDC 48VDC
Floating Charge Voltage 13.5VDC 27VDC 27VDC 54VDC
Over Charge Protection 15.5VDC 31VDC 31VDC 61VDC
Maximum Charge Current 60A 80A 80A 110A
SOLAR CHARGER
Max. PV Array Power 2000W 3000W 6000W 6000W
MPPT Range @ Operating Voltage 55-450VDC
Maximum PV Array Open Circuit Voltage 450VDC
Maximum Charging Current 80A 110A 80A 110A
Maximum Efficiency 98%
PHYSICAL
Dimension, H*W*D(mm) 405*286*98 423*300*120
Net Weight (Kgs) 5 5.5 6.8 8.9
Communication Interface Two Communication One RS485 port for BMS ports; Another RS485/RS232 for remote monitoring
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature -10°C to 55°C
Storage Temperature -15°C to 60°C

Image: Detailed technical specifications for Sumry SP Series Inverters.

4. Safety Precautions

  • **Grounding:** Always ensure the PE protective conductor is properly grounded before any other connections.
  • **Battery Connection:** This inverter MUST work with a battery. Ensure the battery is correctly connected before connecting solar panels.
  • **Qualified Personnel:** Installation and maintenance should only be performed by qualified personnel.
  • **Ventilation:** Ensure adequate ventilation around the inverter to prevent overheating.
  • **Environment:** Avoid installing the inverter in direct sunlight, high humidity, or dusty environments.
  • **Circuit Breakers:** Install appropriate circuit breakers as specified in the installation section to protect the system.
  • **Emergency Shutdown:** Familiarize yourself with the emergency shutdown procedures.

5. Package Contents

Upon receiving your Sumry Hybrid Solar Inverter, please check the packaging for any damage and verify that all components are included. The standard package typically contains:

  • Sumry SP Series Hybrid Solar Inverter Unit
  • User Manual
  • Communication Cable (if applicable)
  • Mounting Hardware (screws, anchors)
  • Optional WiFi/GPRS module (if purchased)

Refer to your product packaging for a complete and accurate list of included items.

Video: Unboxing and initial connection demonstration of the Sumry Hybrid Solar Inverter.

6. Installation

6.1. General Installation Knowledge

Before installing and using the inverter, it is recommended to install 4 circuit breakers in the following 4 positions:

  1. Between the battery pack and the inverter battery input.
  2. Between the solar panel and the photovoltaic input of the inverter.
  3. Between the power input of the grid and the inverter.
  4. Between inverter output and load.

The circuit breaker is to effectively prevent misconnection or reverse connection of the mains input and the inverter output. When there is a short circuit, load short circuit, or overload in the output, the circuit breaker can directly cut off the circuit to protect the inverter.

Installation knowledge diagram showing circuit breaker placement

Image: Diagram illustrating recommended circuit breaker placement for the inverter system.

6.2. Installation Steps

  1. Battery Connection: Install a circuit breaker between the battery and the inverter. After successful installation, open the breaker. Then, connect the battery to the inverter. For 3kW/3.8kW models, a 24V battery is required. For 6.2kW models, a 48V battery is required. Close the circuit breaker and measure the voltage on the battery side of the inverter to confirm correct connection.

  2. PV Input Connection: Install a circuit breaker between the PV input and the inverter. Turn on this circuit breaker after successful installation. Ensure the battery voltage is normal. Connect the solar panels to the inverter. Close the circuit breaker between the PV input and the inverter. At this point, the inverter display should automatically light up and begin charging. Press the button on the bottom right corner of the inverter to start the machine. Verify that there is 220V/230V/240V AC voltage output from the inverter output terminals.

  3. AC Input and Output Connection: Install a circuit breaker between the AC input (mains) and the inverter. Also, install a circuit breaker between the inverter's AC output and your loads. After successful installation, turn on the circuit breakers for both AC input and output. Connect the inverter to the mains power. After 2 minutes, turn off the mains input circuit breaker, and then turn off the circuit breaker of the inverter's output. This completes the installation procedure.

Wiring diagram for Sumry Hybrid Solar Inverter showing connections to generator, mains, battery, PV, and home appliances

Image: Comprehensive wiring diagram for the solar inverter system. Note the caution regarding grounding the PE protective conductor. This inverter requires a battery connection before solar panels.

6.3. Circuit Breaker Specifications

  • For 3kW Machine:

    • Battery to Inverter: 2P100A
    • Photovoltaic Input to Inverter: 2P10A
    • Utility Input to Inverter: 2P32A
    • Inverter Output: 2P15A
  • For 3.8kW Machine:

    • Battery to Inverter: 2P150A
    • Photovoltaic Input to Inverter: 2P20A
    • Utility Input to Inverter: 2P40A
    • Inverter Output: 2P20A
  • For 6.2kW Machine:

    • Battery to Inverter: 2P150A
    • Photovoltaic Input to Inverter: 2P20A
    • Utility Input to Inverter: 2P63A
    • Inverter Output: 2P30A
Diagram showing recommended circuit breaker sizes for different inverter models

Image: Recommended circuit breaker specifications for various Sumry inverter models.

6.4. Solar Panel Wiring Method (Series/Parallel)

The number and configuration of solar panels depend on the inverter's PV charging power and voltage range, as well as the individual panel's voltage and open-circuit voltage. The SP series supports a PV charging voltage range of 55-450V.

  • In Series: Increases the system voltage. The total voltage must be less than the hybrid inverter's maximum input voltage (Voc/inverter). Example: Six 41.92V/10.35A panels in series result in 251.52V.

  • In Parallel: Increases the system current. The total current should not exceed the maximum PV input current of the hybrid inverter. Example: Three 41.92V/10.35A panels in parallel result in 30.95A (10.35A * 3).

The entire photovoltaic system should use the same type of photovoltaic panel. PV cable dimensions: 6-8A/mm².

Solar photovoltaic panel wiring methods: series and parallel diagrams

Image: Diagrams illustrating series and parallel wiring methods for solar panels, including voltage and current calculations.

7. Operating Modes

The Sumry inverter offers versatile working modes to customize the priority of power inputs and outputs, allowing for efficient power management based on your energy consumption needs. It features 3 charging modes and 2 output modes:

7.1. Charging Modes

  • Only Solar: Prioritizes solar power for charging.
  • Solar First: Prioritizes solar power, then uses mains if solar is insufficient.
  • Mains & Solar: Uses both mains and solar power for charging simultaneously.

7.2. Output Modes

  • Solar First: Prioritizes solar power for loads, then switches to battery or grid as needed.
  • SBU First: Prioritizes Solar, then Battery, then Utility (grid) for loads.
Diagram showing inverter operation with battery connected and solar power available vs. solar and AC power not available

Image: Illustration of inverter operation under different power availability scenarios.

8. Monitoring and Communication

The Sumry SP series machines feature a single communication port (COMM port) located on the right side of the unit. You can choose to communicate via an optional WiFi module or directly with a compatible battery management system (BMS). However, only one of these communication methods can be used at a time.

  • WiFi Module: If you wish to use the WiFi module for monitoring via a smartphone app (iOS/Android), it must be purchased separately. Ensure you select this option during order placement or contact the seller directly.

  • Battery BMS Communication: If you opt for battery BMS communication, you must use a battery that supports either the PACE or PYLONTECH communication protocol.

Diagram showing the inverter's communication port and options for WiFi module or BMS connection

Image: Inverter with optional WiFi module and smartphone app for monitoring.

9. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Sumry Hybrid Solar Inverter. The inverter is designed with intelligent fans for strong heat dissipation, which helps maintain stable operation and prolong component life.

  • **Cleaning:** Periodically clean the exterior of the inverter and ensure the ventilation openings are free from dust and debris. Use a soft, dry cloth.
  • **Connections:** Regularly check all electrical connections (battery, PV, AC input/output) to ensure they are tight and free from corrosion.
  • **Environment:** Maintain a clean, dry, and well-ventilated environment around the inverter.
  • **Battery Health:** Monitor battery voltage and performance, especially if using lead-acid batteries, to ensure they are within optimal operating parameters.
  • **Error Codes:** Familiarize yourself with any error codes displayed on the LCD and consult the troubleshooting section or support for resolution.
Sumry Hybrid Solar Inverter highlighting strong heat dissipation features

Image: Inverter design emphasizing strong heat dissipation for reliable operation.

10. Troubleshooting

This section provides guidance on common issues you might encounter with your Sumry Hybrid Solar Inverter. For more complex problems, please contact customer support.

Problem Possible Cause Solution
Inverter not turning on No battery connected or low battery voltage; DC breaker off; Inverter switch off. Ensure battery is connected and charged; Check DC breaker; Turn on inverter switch.
No AC output Overload; Short circuit on output; High temperature; AC output breaker off. Reduce load; Check for short circuits; Allow inverter to cool; Check AC output breaker.
Battery not charging from PV PV input voltage too low/high; PV breaker off; Insufficient sunlight; Incorrect PV wiring. Check PV voltage range; Turn on PV breaker; Ensure adequate sunlight; Verify PV wiring (series/parallel).
Inverter beeping/error code Various internal faults, overload, battery issues. Note the error code and consult the full manual (if available) or contact support.

11. User Tips

  • Battery Compatibility: Always ensure your battery voltage (e.g., 24V for 3kW/3.8kW models) matches the inverter's requirements. The inverter supports various battery types, including Lithium, Gel, LiFePO4, Lead-acid, and AGM.
  • Solar Panel Sizing: Carefully calculate the total voltage and current of your solar panel array to stay within the inverter's maximum PV input voltage (450VDC) and current limits. Using panels of the same type is recommended for optimal performance.
  • Monitoring: Utilize the optional WiFi module for remote monitoring of your system's performance and status via the dedicated smartphone app.
Sumry Hybrid Solar Inverter compatible with various battery types: Flooded, Gel, Lithium-ion, Lithium-iron phosphate, AGM/Sealed, and User custom battery

Image: Inverter compatibility with multiple battery types.

Sumry Hybrid Solar Inverter powering various household appliances like laptops, fans, TVs, and refrigerators

Image: Examples of diversified uses for the inverter, powering common household appliances.

12. Warranty and Support

The Sumry SP Series Hybrid Solar Inverter typically comes with a 1-year warranty. For specific warranty terms and conditions, please refer to your purchase documentation or contact the seller directly. If you encounter any issues or require technical assistance, please reach out to Sumry customer service or your authorized dealer.

A common question from users is regarding the warranty period. The standard warranty offered is 1 year.

© 2024 SUMRY. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.