SKMEI 2341 Digital Electronic Sport Watch Instruction Manual

Introduction

Thank you for purchasing the SKMEI 2341 Digital Electronic Sport Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read this manual carefully to ensure proper use and to enjoy all the features of your new timepiece.

Product Overview

The SKMEI 2341 is a multifunctional sport watch featuring both analog and digital displays. It is designed for durability and includes various functions such as chronograph, alarm, date, week display, and LED backlight.

Figure 1: Watch Components (Case, Dial, Band, Mirror, Clasp, Back Cover)

Figure 2: Button Functions (LIGHT, MODE, START/STOP, RESET)

Figure 3: Functional Overview

Setup Instructions

Before using your watch, familiarize yourself with the button layout and basic functions.

1. Initial Power On

The watch comes with a pre-installed battery. If the display is blank, press any button to activate it. The digital display should light up.

2. Setting Time and Date

1. Press the MODE button repeatedly until you reach the Time Setting mode (usually indicated by flashing digits).
2. Use the RESET button to select the digit you wish to adjust (e.g., seconds, minutes, hour, month, date, day of week).
3. Use the START/STOP button to increase the selected digit.
4. Continue pressing MODE to cycle through other settings like Alarm, Chronograph, and additional time zones.
5. Once all settings are correct, press the MODE button to exit the setting mode.

3. 12/24 Hour Format

In the normal time display mode, press the RESET button to toggle between 12-hour and 24-hour formats. The 'PM' indicator will show for PM hours in 12-hour format.

Operating Instructions

1. Using the LED Backlight

Press the LIGHT button to illuminate the digital display for a few seconds in low-light conditions.

Figure 4: LED Backlight in action

2. Chronograph (Stopwatch) Function

1. Press the MODE button until you reach the Chronograph mode (often indicated by 'ST' or 'CHRO').
2. Press the START/STOP button to start the stopwatch.
3. Press START/STOP again to pause the stopwatch.
4. Press the RESET button to reset the stopwatch to zero.

3. Alarm Function

1. Press the MODE button until you reach the Alarm mode (often indicated by 'AL' or 'ALARM').
2. Use the RESET button to select the hour or minute digits.
3. Use the START/STOP button to adjust the selected digit.
4. Press MODE to exit the alarm setting.
5. To activate/deactivate the alarm, press the START/STOP button while in Alarm mode. An alarm icon will appear/disappear.

4. Dual Time Display

The watch supports displaying multiple time zones. Refer to the setting instructions to configure the additional time displays.

5. Water Resistance

The watch is water-resistant up to 50 meters (5 BAR). This means it is suitable for swimming, washing hands, and getting caught in the rain. It is not recommended for diving or hot water activities like showering or sauna, as steam can penetrate the seals.

Figure 5: Water Resistance Demonstration

Maintenance

1. Cleaning

Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then rinse and dry thoroughly. Avoid harsh chemicals or abrasive materials.

2. Battery Replacement

When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.

3. Storage

Store your watch in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure it is clean and dry.

Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Replace the battery.
• Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a feature of this model). Try pressing the buttons firmly. If issues persist, a reset may be needed (consult a technician).
• Water appears inside the watch: Despite water resistance, extreme temperature changes or improper handling (e.g., pressing buttons underwater) can compromise seals. Stop using the watch immediately and seek professional repair.
• Time is inaccurate: Re-set the time following the instructions in the 'Setup' section. If the issue persists, the movement may require servicing.

Specifications

Figure 6: Detailed Product Parameters

User Tips

• Water Resistance Caution: While rated for 50m, avoid pressing any buttons while the watch is submerged in water to prevent water ingress.
• Read the Manual: Take a few minutes to understand each function. The watch has multiple modes that can be accessed via the MODE button.
• Analog Hand Synchronization: If the analog hands do not match the digital time, you may need to manually adjust them. This is typically done by pulling out the crown (if present, or a specific button sequence for digital watches with analog hands) and rotating it, then pushing it back in. (Specific instructions for this model are not provided, so general advice is given).

Warranty & Support

For any issues or questions not covered in this manual, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Product Video Demonstration