1. Introduction
The Sumry Off Grid Solar Inverter SP Series is a versatile hybrid inverter designed to provide uninterruptible power support. It integrates the functions of an inverter, solar charger, and battery charger into a compact unit. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Sumry inverter.
Key Features:
- Pure sine wave output for sensitive electronics.
- Programmable supply priority for PV, battery, or grid.
- High PV input voltage range (55-450VDC).
- Built-in Max 110A (for 3.8KW & 6.2KW models) MPPT solar charger.
- Compatible with various battery types, including lithium-ion.
- Support for BMS communication with lithium batteries.
- Smart battery charge design to optimize battery life.
- Comprehensive protection against overload, high temperature, and inverter output short circuit.
- Cold start function.
- Intelligent fan speed adjustment.
- Optional built-in anti-dusk kit for harsh environments.
- Optional WiFi & GPRS monitoring available for iOS and Android.

2. Safety Information
Please read and understand all instructions and warnings in this manual before installing, operating, or servicing this inverter. Failure to follow these instructions may result in electric shock, fire, severe injury, or death.
General Safety Precautions:
- Installation must be performed by qualified personnel in accordance with all local electrical codes and regulations.
- Ensure the inverter is disconnected from all power sources (PV, battery, and AC grid) before performing any maintenance or wiring.
- Always use appropriate personal protective equipment (PPE) when working with electrical systems.
- Do not disassemble the inverter. There are no user-serviceable parts inside.
- Ensure proper grounding of the inverter. Always first ground the PE protective conductor.
- Keep children away from the inverter and its wiring.
- Avoid installing the inverter in direct sunlight, high humidity, or dusty environments.
- Ensure adequate ventilation around the inverter to prevent overheating.
3. Installation
Proper installation is crucial for the safe and efficient operation of your Sumry inverter. Follow these steps carefully.
Installation Steps:
- Battery Connection:
Install a circuit breaker between the battery and the inverter. After successful installation, open the breaker. Connect the battery (24V battery for 3kW/3.8kW models, 48V battery for 6.2kW models). Close the circuit breaker and measure the voltage on the battery side of the inverter to ensure it is normal. - PV Input Connection:
Install a circuit breaker between the PV input and the inverter. Turn on this circuit breaker after successful installation. Ensure the battery voltage is normal. Connect the solar panels to the inverter. Close the circuit breaker between the PV input and the inverter. The inverter display will automatically light up and begin charging. - Inverter Startup:
Press the button on the bottom right corner of the inverter to start the machine. Verify that there is 220V/230V/240V voltage output from the inverter's AC output terminals. - AC Input and Output Connections:
Install a circuit breaker between the AC input (utility grid) and the inverter. Install another circuit breaker between the inverter's AC output and your household loads. After successful installation, turn on the circuit breakers for both AC input and output. Connect the machine to the mains. After 2 minutes, turn off the mains input circuit breaker, then turn off the circuit breaker of the inverter's output. This completes the installation procedure.
Wiring and Circuit Breaker Specifications:
It is recommended to install circuit breakers at four key positions to prevent misconnection or reverse connection of the mains input and inverter output, and to protect against short circuits, load short circuits, or overloads.


Circuit Breaker Specifications by Model:
- 3kW Model:
Battery to Inverter: 2P100A
Photovoltaic Input to Inverter: 2P10A
Utility Input to Inverter: 2P32A
Inverter Output: 2P15A - 3.8kW Model:
Battery to Inverter: 2P150A
Photovoltaic Input to Inverter: 2P20A
Utility Input to Inverter: 2P40A
Inverter Output: 2P20A - 6.2kW Model:
Battery to Inverter: 2P150A
Photovoltaic Input to Inverter: 2P20A
Utility Input to Inverter: 2P63A
Inverter Output: 2P30A
Connecting Solar Panels:
The number of solar panels required depends on the inverter model's PV charging power and voltage range, as well as the individual solar panel's voltage and open circuit voltage. For SP series, the 3kW model has a PV charging power of 3000W and a voltage range of 55-450V. The 3.8kW/6.2kW models have a PV charging power of 6000W and a voltage range of 55-450V.

Refer to the diagram for guidance on series and parallel connections. Ensure the total voltage of panels in series is less than the inverter's maximum input voltage (Voc/inverter) and the total current in parallel does not exceed the maximum PV input current of the hybrid inverter. Recommended PV cable dimensions are 6-8A/mm².
4. Operating the Inverter
The Sumry inverter features a comprehensive LCD display and user-configurable buttons for easy operation. You can customize various settings to suit your energy needs.
Versatile Working Modes:
The inverter offers flexible power management with different charging and output modes:
- 3 Charging Modes:
- Only Solar: Prioritizes solar power for charging.
- Solar First: Uses solar power first, then grid power if solar is insufficient.
- Mains & Solar: Uses both mains and solar power for charging.
- 2 Output Modes:
- Solar First: Prioritizes solar power for loads, then battery, then grid.
- SBU First: Prioritizes solar, then battery, then utility (grid).

Monitoring and Control:
The inverter can be monitored and controlled via an optional WiFi module and a dedicated smartphone app (SmartESS App, available on app stores). This allows you to view real-time data and adjust settings remotely.

Video: Product Unboxing and Demonstration.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Sumry inverter.
General Maintenance:
- Cleaning: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
- Fan Speed Adjustment: The inverter features intelligent fan speed adjustment to manage heat. Ensure fans are not obstructed.
- Environmental Protection: If operating in harsh environments, the optional anti-dusk kit helps protect internal components.
- Connections: Regularly check all electrical connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
- Battery Health: Monitor battery voltage and performance through the LCD display or the SmartESS app to ensure optimal battery life.

6. Troubleshooting
This section addresses common issues you might encounter with your Sumry inverter.
Common Issues and Solutions:
- No Power Output:
- Check all circuit breakers (battery, PV, AC input, AC output) to ensure they are closed and not tripped.
- Verify battery voltage is within the normal operating range.
- Ensure the inverter is turned on (press the power button).
- Check all wiring connections for proper installation and tightness.
- Inverter Not Charging Batteries:
- Verify solar panel connections and ensure sufficient sunlight.
- Check PV input voltage and current on the LCD display against specifications.
- Ensure the correct charging mode is selected (e.g., Solar First, Mains & Solar).
- Inconsistent Solar Amps Input (e.g., for SP4200 24V):
- Refer to the detailed specifications table in this manual for the precise solar input amperage for your specific model. Discrepancies can arise from different measurement conditions or varying product revisions. Always consult the most current product data sheet.
- Inverter Overheating:
- Ensure adequate ventilation around the inverter.
- Check if cooling fans are operating correctly and are not obstructed by dust or debris.
- Reduce the load on the inverter if it consistently overheats.
- Communication Issues (WiFi/BMS):
- Ensure the optional WiFi module is correctly installed and configured.
- If using BMS communication, verify that the battery's communication protocol (PACE or PYLONTECH) is compatible and correctly connected to the inverter's COMM port.
7. Specifications
Detailed technical specifications for the Sumry SP Series Off Grid Solar Inverter.

General Specifications:
- Wave Form: Pure Sine Wave
- Output Type: SINGLE
- Output Frequency: 50/60HZ
- AC Output Voltage: 220-230VAC
- PV Input Voltage Range: 55-450VDC
- Max. Charging Current: 80/110A
- Battery Voltage: 24V (for 3kW/3.8kW models), 48V (for 6.2kW models)
- Operating Temperature: -10°C to 55°C
- Storage Temperature: -15°C to 60°C
- Humidity: 5% to 95% Relative Humidity (Non-condensing)
- Certification: CE
- Origin: Mainland China
Model Specifics:
| Model | Rated Power | Max. PV Array Power | Max. PV Input Current |
|---|---|---|---|
| SP-2200 | 2200VA/1800W | 2000W | 10A |
| SP-3200 | 3200VA/3000W | 3000W | 10A |
| SP-4200 | 4200VA/3800W | 6000W | 10A |
| SP-7000 | 7000VA/6200W | 6000W | 20A |
8. User Tips
Helpful advice for getting the most out of your Sumry inverter.
- Battery Compatibility: The inverter is compatible with a wide range of batteries including Flooded, Gel, Lithium-iron phosphate, Lithium-ion, AGM/Sealed, and user-customized battery types. This flexibility allows you to choose the best battery solution for your needs.
- WiFi Module: For remote monitoring and control via the SmartESS app, a separate WiFi module is required. This module connects to the inverter's COMM port. If you did not purchase it with your inverter, you may contact the seller to acquire one.
- Powering Appliances: The pure sine wave output ensures compatibility with various household and office loads, including refrigerators, lamps, televisions, fans, and air conditioning units.


9. Warranty and Support
The Sumry Off Grid Solar Inverter SP Series comes with a 1-year warranty, as indicated on the product packaging. For technical support, warranty claims, or any questions regarding your inverter, please contact the authorized dealer or manufacturer's customer service. Ensure you have your product model and purchase information ready when seeking support.