Imagebon M20 Pro Dash Cam User Manual

1. Introduction

Thank you for choosing the Imagebon M20 Pro Dash Cam. This device is a high-performance 4G LTE center console DVR featuring an Android 13 intelligent system, an 8-core processor, and a 10.26-inch display. It offers advanced functionalities such as Wireless CarPlay, Android Auto, ADAS warning systems, GPS navigation, remote monitoring, and dual-channel recording to enhance your driving safety and convenience.

2. Safety Warnings

• Do not squeeze the dash cam forcefully.
• If any problems are encountered, do not attempt to operate the device with a "fault" condition.
• If the dash cam behaves abnormally, press and hold the power button for 9 seconds to force a power off and restart.
• Ensure the device is installed securely and does not obstruct your view while driving.
• Use only the provided power accessories to prevent damage.

3. Package Contents

Please check the package for the following items:

• 1 x 10.26" Car DVR Unit
• 1 x ACC Line (Buck Line)
• 1 x AUX Line
• 1 x GPS Antenna
• 1 x 6m or 10m Rear Camera (optional, depending on your choice)
• 1 x User Manual

4. Product Overview

The Imagebon M20 Pro Dash Cam features a 10.26-inch display and an integrated camera. Key components and interfaces are detailed below:

Adjustable Features:

5. Installation Guide

1. Turn off car engine: Ensure your vehicle's engine is turned off before beginning installation.
2. Insert SD card: Insert a high-speed (Class 10 or above) TF card with a minimum capacity of 8GB and a maximum of 128GB into the dash cam's TF card slot. This card is used to store driving recorder video.
3. Fix DVR: Securely fix the DVR unit onto your car's original rearview mirror or dashboard.
4. Insert car charger: Plug the car charger into your car's cigarette lighter socket.
5. Connect USB port: Connect the USB port of the dash cam to the car charger using the provided charging extension cable. When wiring, route the cable neatly along the edge of the windshield to avoid obstruction.
6. Install rear camera (optional): If you have an optional rear camera, install it on the rear of the vehicle. Pay attention to the correct orientation. Route the rear camera cable along the roof of the vehicle and connect it to the 2.5mm AV-IN jack on the dash cam.
7. Adjust lens: Adjust the front camera lens position to ensure it is level with the ground and provides a clear view.
8. Start engine: Start your car's engine and verify that the device is installed correctly. The system working indicator should light up, and the recording indicator light should flash. If the displayed picture is inverted, please contact support.

6. Operating Instructions

6.1. Power Key

The power key is located on the device. It serves two main functions:

• Power On/Off: In the off state, press and hold the power button for 3 seconds to turn on the device. In the power-on state, press and hold for 3 seconds to automatically save the video file and shut down.
• Turn off Display Backlight: In any state, short press the power button to enter screen saver HUD mode. Short press again to turn off the backlight. Short press again to turn on the display.
• Reset: If the recorder crashes, locate the reset hole on the back of the fuselage and short press it to return to normal operation.

6.2. Screensaver and Hibernation

You can manage the screensaver settings via Settings > Display > Screen Saver or through the shortcut settings. By default, the device will automatically enter screensaver mode if there is no operation for one minute. If the sleep screensaver is enabled, the device will enter sleep mode.

6.3. Main Interface

The main interface provides access to various applications and functions. It typically displays navigation, DVR, audio, mirror link, CarPlay, Android Auto, music, Chrome, and Google Play.

6.4. Navigation

Click the "Navigation" icon to enter the default map navigation. Long press the "Navigation" icon to access the navigation application interface, where you can set your preferred map as default.

6.5. Cloud Service

Click the "Cloud Service" icon to enter the background cloud service. This feature can be linked to remote monitoring and traffic management.

6.6. Bluetooth

Click the "Bluetooth" icon to enter the Bluetooth interface. From here, you can connect your car's Bluetooth or mobile phone's Bluetooth for hands-free calling, music playback, and phone book functions.

6.7. Playback

Click the "Video" icon to enter the video playlist. You can play videos and view pictures. If the recorder is currently recording, you must stop recording before viewing files. Video playback is categorized into Normal video, Locking video, and Pictures. Long press a video file to perform relevant operations.

• Select All: Click to select all video playback files.
• Unlock: After playing a locked file, click to unlock it.
• Delete: Click to delete selected video playback files.
• Cancel: Click to cancel the selected video.

6.8. DVR (Driving Video Recorder)

Click the "DVR" icon to open the DVR interface. You can switch between front and rear video previews by clicking the preview interface. Click the back button to exit.

• Video Playback Functions: Click the icon to enter video playback related functions.
• Locked Video: When recording with a TF card inserted, videos being recorded will be locked and will not be overwritten by loop recording.

6.9. Recording Settings

Click the settings icon to enter the recording settings interface:

• Format SD card: Use this option to format the TF card.
• Record Time: Set the video segment duration (e.g., 1min, 2min, 3min, 4min, 5min).
• Collision-lock Sensitivity: Adjust the sensitivity of gravity sensing (low, medium, high). Different sensitivities correspond to different file locking behaviors.
• Speed Unit: Choose between km/h and mph.

6.10. Music Interface

Click the "Music" icon to enter the music interface.

6.11. FM Transmitter

Click the "FM" icon to enter the FM transmitter interface. This allows you to transmit music to your vehicle's sound system.

• Activation: After turning on FM, the frequency can be adjusted manually or by voice. It is recommended to first tune your car radio to an empty frequency band without sound.
• Connection: Turn on your car radio and adjust it to the corresponding frequency as set on the dash cam. The FM function can then be used normally.

6.12. App List

Click the "AppList" icon to view all installed applications.

6.13. Shortcut Settings

Click the shortcut settings icon to adjust volume, brightness, WiFi, and other switches.

6.14. System Settings

Click the system settings icon to perform system-related operations:

• Network & Internet: Manage Wi-Fi, mobile data, and hotspot settings. To connect to Wi-Fi, click the WLAN column, select a network, and enter the password if required.
• Park Monitor: Configure remote wake-up and parking monitoring settings. If the car moves abnormally while parked, the device will automatically wake up and record for one minute. The wake-up sensitivity can be adjusted (low, medium, high).
• Apps & Notifications: View and manage installed applications.
• Storage: View total capacity, available space, and used space.
• Language & Input: Set the device language and input method.
• Date & Time: Configure date and time settings, including automatic synchronization or manual adjustment.
• Reset Options: Reset Wi-Fi, mobile data, Bluetooth settings, app preferences, or clear all data.
• About Device: View device information such as battery status, network status, model, Android version, firmware version, kernel version, and processor type.

6.15. ADAS Warning Systems

The device includes Advanced Driver-Assistance Systems (ADAS) to enhance safety:

• Lane Departure Warning (LDW): Warns if the vehicle drifts out of its lane. If a GPS active antenna is used, warnings trigger above 50KM/h. Without GPS, warnings trigger upon lane departure regardless of speed.
• Forward Collision Warning (FCW): Alerts the driver to potential front-end collisions.
• Front Vehicle Departure (FVD): Notifies the driver when the vehicle in front starts moving after a stop.

6.16. Wireless CarPlay & Android Auto & Mirror Link

• Wireless CarPlay & Android Auto: Connect your Apple or Android smartphone wirelessly to display compatible apps on the dash cam screen. This allows for navigation, messaging, and hands-free calls.
• Mirror Link: Cast videos, pictures, and music directly from your mobile phone to the driving recorder's display.

6.17. APP Remote Monitor (Car Keeper) & GPS Logger Tracking

Use the Car Keeper app (available for iOS and Android via QR code) to remotely monitor your vehicle. You can track your car's location, capture images, and view video clips from your smartphone when connected to the internet.

6.18. 24H Parking Monitor

When the vehicle is parked, the device will automatically turn on and start recording for a few seconds if it detects any impact or movement nearby, ensuring 24-hour parking surveillance.

6.19. Loop Recording

This feature ensures continuous recording by automatically overwriting the oldest files when the storage card is full, allowing for indefinite recording without manual intervention.

6.20. G-Sensor

The 3-axis G-Sensor detects sudden acceleration, braking, and collisions. It automatically captures and protects critical footage surrounding an accident, preventing these important files from being overwritten by loop recording.

6.21. Real Time Reverse View

The device supports a 1080P full-screen reverse image with guidelines. When reversing, the system automatically activates the high-definition rear camera, displaying the rear view on the IPS screen. The preview angle and guide lines can be adjusted by sliding the left side of the screen.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the device's screen and body. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• SD Card: Regularly format the SD card (e.g., once a month) to maintain optimal recording performance and prevent data corruption. Back up any important files before formatting.
• Software Updates: The device supports OTA (Over-The-Air) updates. Regularly check for and install updates to ensure the best performance and latest features.

8. Troubleshooting

• Device not turning on: Ensure the power cable is securely connected and the car's cigarette lighter socket is functioning. If using a buck line, check the wiring.
• Screen frozen or unresponsive: Use the reset hole on the back of the device to perform a soft reset.
• Recording issues: Ensure a high-speed (Class 10 or above) TF card is inserted and has sufficient free space. Format the SD card if necessary.
• GPS signal loss: Ensure the GPS antenna is properly connected and positioned with a clear view of the sky.
• Wi-Fi connection problems: Check Wi-Fi settings in the system menu. Ensure the password is correct and the device is within range of the Wi-Fi network.
• ADAS warnings not triggering: Verify ADAS settings and ensure the driving speed meets the trigger conditions (if using GPS active antenna).
• Inverted display picture: This may indicate an incorrect rear camera installation or setting. Check the camera orientation and contact support if the issue persists after checking.

9. Specifications

10. User Tips

• Remote Monitoring: The Car Keeper mobile application allows you to view your parked car remotely through the surveillance camera. Ensure the dash cam is connected to Wi-Fi or has an active SIM card for 4G connectivity to use this feature.
• Map Updates: For map updates, especially for specific regions like South America (Argentina, Brazil, Uruguay), check the device's system settings for navigation map update options or consult the Imagebon support website for region-specific map packages.
• Optimal SD Card Performance: To ensure smooth recording and prevent issues, use a high-quality, high-speed (Class 10 or higher) TF card and format it regularly.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase or visit the official Imagebon website. Keep your proof of purchase for warranty claims.

If you encounter any issues not covered in this manual, please contact customer support for assistance.