1. Introduction
This manual provides essential information for the safe and effective operation of your NEJE E80 Fixed-Focus Laser Module. The E80 is a high-power 24W optical output laser module featuring a 4xLD array and advanced lens compression light path, designed for precise engraving and cutting of various materials.
Video: Overview of the NEJE E80 Laser Module's capabilities.
2. Important Safety Information
DANGER: Laser Class 4 - VISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION.
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Wear Goggles: Always wear appropriate laser safety goggles during operation to protect your eyes from direct or scattered laser radiation.
- Flammable Materials: Exercise extreme caution when working with flammable materials. Ensure proper ventilation and fire suppression measures are in place.
- Eye Exposure: Never look directly into the laser beam or at reflections.
- Direct Contact: Do not touch the laser directly during or immediately after operation, as it can be hot.
- Harmful Gases: Be aware that some materials (e.g., PVC) may emit harmful gases when engraved or cut. Ensure adequate ventilation and understand the material characteristics before use.
- Children Safety: Children under 14 years of age are prohibited from using this product. Children over 14 years of age require adult supervision when using this product.
- Mirror Objects: Avoid using the laser on mirror-like or highly reflective objects, as this can cause unpredictable laser reflections.
Image: Laser Class 4 safety warnings and precautions.
3. Package Contents
Verify that all items listed below are included in your package:
- NEJE E80 Laser Module
- NEJE Module Manual
- NEJE PWM/Temperature Tester Board
- NEJE Interface Switch / Transfer Board
- 24V 5A Power Adapter
- Z-axis Adjuster
- Short Air Nozzle
- Standard Air Nozzle
- M4 to M4 Connector
- Metal Tube Air Assist
- Replacement Protective Lens
- Light Shield
Image: Visual representation of the package contents.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | E80 |
| Optical Power | 24W |
| Power Density | 6666W/mm² |
| Focus Size | 0.1 × 0.1mm |
| Wavelength | 450nm |
| Laser Class | Class 4 |
| Number of Diodes | 4 |
| Radiator Size | 40.5 x 56 x 113 mm |
| Focus Position | 25mm from the radiator (manufacturing error ±1mm) |
| Weight | 600g |
| Interface | PH2.0 4Pin + 2Pin (EX Power) |
| Drive Design | Built-in |
| Input | 24V 3A + |
| PWM Input | VPP(3.3-24V), Recommend 1KHz |
| Max Fan Speed | 10600RPM (Double ball bearing) |
| Quiet Design | Dynamic adjustment via built-in control IC |
| ESD Design | Yes |
| Temperature Feedback | Yes |
| Recommended Cutting & Carving Depth | <16mm (with accurate focusing and air assist) |
| Stainless Steel Carving | Yes |
| 0.15mm Stainless Steel Cutting | Yes |
| Certification | CE |
| Origin | Mainland China |
Image: Detailed comparison of E80 features against other laser modules.
5. Setup
5.1 Initial Preparation
- Unpacking: Carefully remove all components from the packaging.
- Protective Films: Before first use, remove all protective films from the device.
5.2 Connecting the Laser Module
The NEJE E80 Laser Module is designed for wide compatibility with various control boards. Follow these steps for connection:
- Power Connection: Connect the 24V and GND pins of the laser module to a 24V power supply. A 3A-5A power adapter is recommended to ensure sufficient power.
- PWM/TTL Connection: Connect the TTL/PWM pin of the laser module to the PWM output pin of your control board. The laser module turns on with an input of 3.3V~24V to the TTL/PWM pin and turns off when connected to GND.
- Temperature Feedback: The module includes a temperature feedback pin; this does not require connection for basic operation.
Image: Connection ports on the NEJE E80 Laser Module.
Image: Connection diagram for various control boards.
Image: Adapter board instructions and wiring diagram.
Image: Wiring diagram for the PWM/Temperature tester board.
Note: The old NEJE 3 Max may require some modifications to the limit button for compatibility with this module.
6. Operation
6.1 General Usage
- Focus Adjustment: Set the appropriate focus for your material. The optimal focus position is approximately 25mm from the radiator. The Z-axis adjuster can be used for precise height control.
- Parameters: Adjust engraving/cutting parameters (speed, power, passes) according to the material and desired outcome. Refer to neje.wiki for detailed tutorials and recommended settings.
- Air Assist: Utilize air assist for cleaner cuts and to prevent charring, especially for thicker materials.
6.2 Air Assist Nozzles
The NEJE E80 comes with two types of air nozzles for different material thicknesses:
- Standard Air Nozzle: Recommended for materials less than 17mm thick.
- Short Air Nozzle: Recommended for materials between 17-30mm thick. Closer spacing generally results in better cutting performance.
Image: Guide for selecting the correct air nozzle based on material thickness.
6.3 Material Compatibility and Performance
The E80 module is capable of engraving and cutting a wide range of materials. Below are some examples and performance indicators:
- Wood: Excellent for wood carving and cutting. Can cut 30mm thick wood and 17mm pine board with high quality.
- Metal: Capable of 0.15mm metal cutting and stainless steel carving.
- Acrylic: Suitable for cutting black acrylic.
- Other Materials: Fabric, leather, ceramics, stone, glass, and more.
Image: NEJE E80 performing metal cutting.
Image: NEJE E80 demonstrating wood cutting capability.
Image: Comparison of cutting quality for 17mm pine board with E80 vs. other modules.
Image: Examples of projects created with the NEJE E80 Laser Module.
7. Maintenance
- Cleaning: The lens of the laser module needs to be cleaned regularly to maintain optimal performance.
- Fan Design: The module features a user-replaceable fan design for easy maintenance.
- Storage: After use, turn off the device and store it in a dry place, away from children.
- Heat Dissipation: The red copper efficient heat dissipation system helps ensure long-term stability and performance.
Image: Red copper efficient heat dissipation system for the E80 module.
Image: Features like user-replaceable fan design for easy maintenance.
8. Troubleshooting
- Laser Not Firing: Ensure all connections (24V, GND, TTL/PWM) are secure and correctly wired. Check if the PWM signal is being sent from your control board.
- Poor Engraving/Cutting Quality:
- Verify the laser focus is correctly set for your material.
- Adjust power and speed settings. Higher power or slower speed may be needed for deeper cuts/engravings.
- Ensure the lens is clean.
- Confirm air assist is properly configured and functioning, especially for cutting.
- Module Overheating: Ensure the fans are operating correctly. Check for any obstructions to airflow. The module has built-in temperature feedback and over-temperature protection.
- Difficulty with Fine Threads: Be careful when handling fine threads, such as those for the nozzle, to avoid cross-threading or binding.
9. User Tips
- Nozzle Thread Care: When attaching or detaching the air nozzle, be gentle with the fine aluminum threads at the bottom of the unit to prevent damage.
- Material Testing: Always perform small test cuts or engravings on new materials or with new settings to optimize results and prevent waste.
- Ventilation: Always ensure adequate ventilation in your workspace, especially when engraving or cutting materials that may produce fumes.
10. Warranty & Support
NEJE provides comprehensive after-sales service for its products:
- Warranty: The NEJE E80 Laser Module comes with a 2-year warranty. To ensure warranty coverage, register your SN code.
- Original Brand Guarantee: Benefit from a 9-year original brand guarantee.
- Expert Service: Access quick response expert service for any issues or questions.
- Warranty Conditions:
- Provide purchase authorization store and order number, module SN code, and Warranty label photo. SN code lost warranty time is subject to your purchase record.
- Damage due to high dust environment, high pressure damage, unauthorized disassembly, or improper air assist may damage the lens and internal structure. In such cases, NEJE does not provide free after-sales service, and lens cleaning/replacement may be at customer's expense.
- If there is a fault, provide a fault video to the NEJE official store or authorized store customer service.
- For neglected issues, you can complain to service@nejetool.com for a satisfactory result.
Image: Overview of NEJE's after-sales service and warranty.
For additional resources, including software downloads and product use guides, please visit the official NEJE website: neje.wiki.
A detailed user manual in PDF format is also available: View User Manual (PDF)