1. Introduction
The Baofeng DM-1701 is a versatile DMR (Digital Mobile Radio) digital walkie talkie designed for reliable communication. It supports both digital and analog modes, featuring dual time slots (Tier I & II) and dual band VHF/UHF frequencies. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DM-1701 radio.

2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Baofeng DM-1701 Radio
- 1 x Battery (2200mAh)
- 1 x Belt Clip
- 1 x Hand Strap
- 1 x Power Adapter
- 1 x Desktop Charger
- 1 x Product Manual
3. Key Features
- Digital & Analog Mode: Supports both DMR digital and traditional analog communication.
- Dual Time Slot: Operates in Tier I & II dual time slot for efficient channel usage.
- Dual Band: Covers VHF (136-174MHz) and UHF (400-480MHz) frequency ranges.
- High Power Output: Up to 5 Watts for extended range.
- Large Battery Capacity: Equipped with a 2200mAh battery for long standby time.
- Open GD77 Support: Compatible with Open GD77 firmware for advanced customization.
- 1.77-inch LCD Screen: Clear display for channel information and settings.
- Illuminated Keypad: For easy operation in low-light conditions.
- Up to 3000 Storage Channels: Ample capacity for various communication needs.


4. Setup Guide
4.1. Battery Installation
- Align the battery with the grooves on the back of the radio.
- Slide the battery upwards until it clicks into place.
- To remove, press the battery release latch and slide the battery downwards.
4.2. Antenna Attachment
- Screw the antenna into the connector on the top of the radio clockwise until it is firmly seated.
- Do not overtighten.
4.3. Charging the Battery
- Connect the power adapter to the desktop charger.
- Plug the power adapter into an AC outlet.
- Place the radio (with battery installed) into the desktop charger.
- The charging indicator light will show the charging status (typically red for charging, green for fully charged).
4.4. Initial Power On
- Ensure the battery is charged and installed, and the antenna is attached.
- Rotate the Power/Volume knob clockwise to turn on the radio.
- Adjust the knob to your desired volume level.
4.5. Open GD77 Firmware (Optional)
The Baofeng DM-1701 supports Open GD77 firmware for enhanced features and customization. The radio does not come with Open GD77 pre-installed. If you wish to use Open GD77, please contact your seller for installation software and instructions. It is recommended to have technical knowledge before attempting firmware upgrades.
5. Operating Instructions
5.1. Power On/Off and Volume Control
Rotate the top-left knob clockwise to power on the radio and increase volume. Rotate counter-clockwise to decrease volume and power off.
5.2. Channel Selection
Use the Up/Down arrow keys on the front panel to navigate through channels. The 1.77-inch LCD screen will display the current channel information.
5.3. Transmitting and Receiving
- To transmit, press and hold the PTT (Push-To-Talk) button on the side of the radio. Speak clearly into the microphone.
- Release the PTT button to receive.
- Ensure you are on the correct frequency and channel for communication.
5.4. Digital and Analog Modes
The DM-1701 automatically detects and operates in either digital (DMR) or analog mode based on the channel settings. Ensure your channels are programmed correctly for the desired mode of operation.
5.5. Dual Time Slot Operation
In DMR digital mode, the radio utilizes dual time slots (Time Slot 1 and Time Slot 2) to allow two simultaneous conversations on a single frequency. This is managed through channel programming.

6. Maintenance
6.1. Cleaning
- Wipe the radio surface with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the radio is dry before use.
6.2. Battery Care
- Charge the battery fully before first use.
- Avoid overcharging or completely draining the battery to prolong its lifespan.
- Store the battery in a cool, dry place when not in use for extended periods.
6.3. Storage
- Store the radio in a dry, dust-free environment.
- Keep away from extreme temperatures and direct sunlight.
- Remove the battery if storing for a long duration.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Low or dead battery; Incorrect battery installation | Charge the battery; Reinstall the battery correctly |
| Cannot transmit or receive | Incorrect frequency/channel; Antenna not properly attached; Out of range | Verify channel settings; Reattach antenna; Move closer to other radios |
| Poor audio quality | Low volume; Weak signal; Obstructions | Adjust volume; Move to an open area; Check antenna connection |
| Display not working | Radio off; Software issue | Power on radio; Contact support if issue persists |
8. Specifications

| General | |
|---|---|
| Frequency Range | VHF 136-174MHz & UHF 400-480MHz (Dual Band) |
| Memory Channel | Up to 3000 |
| Operating Voltage | DC 7.4V |
| Frequency Stability | ±1.0ppm |
| Operating Temperature | -30°C ~ +60°C |
| Operating Mode | Same-frequency simple or different-frequency simplex |
| Antenna Impedance | 50Ω |
| Battery Capacity | 2200mAh |
| Weight | About 300g (with battery & antenna) |
| Dimensions (H×W×D) | 133x62x36mm (antenna not included) |
| Transmitter | |
|---|---|
| Output Power | 1W/5W |
| Digital | Tier I & II |
| Adjacent Channel Power | ≤-65dB / ≤-60dB |
| Modulation Distortion | ≤5% |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
| Vocoder Type | AMBE+2™ |
| FM Modulation | 16KΦF3E@25KHz, 11KΦF3E@12.5KHz |
| 4FSK Digital Modulation | 12.5KHz for data 7K60FXD, 12.5KHz for data and voice: 7K60FXE |
| Antenna Port Spurious | 9KHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30dBm |
| Receiver | |
|---|---|
| Analog Sensitivity | -122dBm (12dB SINAD) |
| Digital Sensitivity | -120dBm (BER ≤5%) |
| Signal Imitation | ≥70dB |
| Intermediation (Wide/Narrow) | ≥62dB / ≥58dB |
| Adjacent Channel Selectivity | ≥65dB / ≥60dB |
| Audio Power | 1W |
| Audio Distortion | <10% |
| Receive Current | ≤380mA |
| PM Noise | ≥45dB@25KHz; ≥40dB@12.5KHz |
9. User Tips
- Verify Certifications: For peace of mind regarding product authenticity and compliance, check for CE markings or other relevant certifications on the radio's internal sticker or packaging.
- Firmware Updates: Regularly check for and install the latest firmware updates, especially if using Open GD77, to ensure optimal performance and access to new features.
- Programming Software: Utilize the official programming software (CPS) or Open GD77 tools to customize channels, contacts, and other settings for your specific needs.
10. Warranty and Support
Your Baofeng DM-1701 radio is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your original point of purchase or the official Baofeng customer service channels.
Note: All specifications are subject to change without notice.