1. Introduction
This manual provides essential information for the safe and effective use of your CADA Technical Power Functions S059-001 set. This high-tech power system includes various motors (Servo, L, M), LED lights, a 2.4G remote controller, and a lithium battery box, designed to bring dynamic movement and illumination to your building block creations. It is compatible with popular building block models such as Lego cars 88004, 88003, and 8883.
2. Package Contents
Please verify that all the following components are included in your package:
- 1x 2.4G Controller (Remote Control)
- 1x Lithium Battery Box
- 1x M-Motor
- 1x Servo Motor
- 1x L-Motor
- 1x USB Charging Cable
- 1x Extension Cord
- 1x LED Light


3. Safety Information
- Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is recommended for all users, especially younger children.
- Battery Safety: The Lithium Battery Box operates at 5V. Use only the provided USB cable for charging. Do not attempt to short-circuit, disassemble, or expose the battery to fire, water, or extreme temperatures. Discontinue use if the battery shows signs of damage or overheating.
- Electrical Safety: Ensure all electrical connections are secure and properly inserted before operating the system. Do not immerse any electrical components in water or other liquids.
- Recommended Age: This product is recommended for ages 6 and up.
4. Setup Instructions
Follow these steps to set up your CADA Power Functions system:
- Charge the Lithium Battery Box: Connect the provided USB charging cable to the Lithium Battery Box and a standard USB power source (e.g., computer USB port, USB wall adapter). The charging time is approximately 30 minutes.
- Integrate Battery Box: Securely place the Lithium Battery Box within your building block model. Ensure it is easily accessible for charging and power control.
- Connect Motors and Lights: Attach the M-Motor, L-Motor, Servo Motor, and LED Light to the available ports on the Lithium Battery Box. Use the Extension Cord if additional length is required for connections. Ensure all connectors are firmly seated.
- Secure Components: Integrate all motors, lights, and wiring neatly into your building block creation. Ensure wires do not interfere with moving parts.
- Power On: Switch the Lithium Battery Box to the 'ON' position.
- Pair Remote Control: The 2.4G Controller should automatically pair with the Lithium Battery Box when both are powered on and in close proximity. If pairing issues occur, try powering both devices off and then on again.

5. Operating Instructions
Once your CADA Power Functions system is set up, you can begin operating your model:
- Motor Control: Use the joysticks or directional buttons on the 2.4G Controller to operate the connected motors.
- M-Motor and L-Motor: These motors are typically used for driving, rotating, or lifting functions. The remote control allows for forward/backward movement or continuous rotation, often with variable speed control.
- Servo Motor: The Servo Motor provides precise angular control, ideal for steering mechanisms, opening/closing doors, or other specific positional movements. The remote control will allow for fine adjustments of its position.
- LED Light Control: The LED Light can usually be switched on or off via a dedicated button on the remote control or through the power functions system.
- Experimentation: Familiarize yourself with the remote control's layout and functions to fully explore the capabilities of your powered building block model.
6. Maintenance
- Cleaning: Wipe all components with a dry, soft cloth. Do not use abrasive cleaners, solvents, or immerse electrical parts in water.
- Battery Care: Recharge the Lithium Battery Box when its power is low. For long-term storage, charge the battery to approximately 50% capacity and store it in a cool, dry place to prolong its lifespan. Avoid fully discharging the battery for extended periods.
- Storage: Store all components in a clean, dry environment, away from direct sunlight, high humidity, and extreme temperatures.
7. Troubleshooting
If you encounter issues with your CADA Power Functions set, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Product not powering on | Battery box not charged or switched off. Loose connections. | Ensure Lithium Battery Box is fully charged and switched ON. Check all cable connections. |
| Motors not responding | Motor connections loose. Remote not paired or out of range. Motor jammed. | Verify motor connections. Re-pair remote control (power cycle both devices). Check for obstructions preventing motor movement. |
| LED Light not working | Light connection loose. Power system off. | Check LED Light connection. Ensure the Lithium Battery Box is powered on. |
| Remote control unresponsive | Remote not paired. Interference. | Power cycle both the remote and battery box to re-establish pairing. Ensure no strong interference sources are nearby. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | CADA |
| Model Number | S059-001 |
| Material | Plastic |
| Block Size | Small building block (Compatible with Lego) |
| Certification | CE |
| Gender | Unisex |
| Recommended Age | 6-12Y, 14+y, 18+ |
| Origin | Mainland China |
| Compatible With | LEGO 88004, 88003, 8883 |
| Working Voltage | 5V |
| Power Type | Lithium Battery Box |
| Functions | Remote Control |
| Charging Time | Approx. 30 minutes |
| Package Weight | 0.1 kg |
| Package Dimensions (L x W x H) | 15 cm x 10 cm x 10 cm |
9. User Tips
- Creative Building: This power functions set is designed to enhance your building block creations. Experiment with different motor placements and gear ratios to achieve various movements and speeds for your models.
- Cable Management: When integrating the components, try to route cables neatly to prevent tangles and ensure smooth operation of moving parts.
- Battery Life: For longer play sessions, consider having a portable power bank ready to recharge the Lithium Battery Box via the USB cable.
10. Warranty and Support
For any issues, questions, or technical support regarding your CADA Technical Power Functions S059-001 set, please contact the seller or manufacturer's customer support. Please retain your purchase receipt as proof of purchase for any warranty claims.